Liquid temperature

The furnace can be used as a universal laboratory muffle furnace in metallurgical, jewelry and ceramic production, in orthopedic dentistry, chemical and food laboratories. Technical specifications The furnace operates at ambient temperatures from 10 to 35 ° C and relative humidity up to 80% at 25 ° C. The designation of the furnace when ordering: muffle furnace MIMP-17M, where 17 indicates the volume of the working chamber of the furnace in liters. Power consumption - 5000 watts Dimensions of the working chamber W×D×B – 305×300×185 mm Dimensions W×D×B – 570×580×550 mm Weight – 60 kg

Designed for local removal of polluted air – for example, from atomic absorption spectrometers installed on laboratory tables. There are two models – for mounting to the wall and for mounting to ceiling structures. 1. LC-600 ZVN Width - 600 STEEL - 12 570 ₽ 2. LC-600 ZVP Width - 600 STEEL - 13 550 ₽ 3. LC-900 ZVN Width - 1260 STEEL - 14,820 ₽ 4. LC-900 ZVP Width - 1260 STEEL - 16,830 ₽

Vacuum compression furnace SNVS-4,5.5,5/3-I2PD is designed for drying, degassing in vacuum and under pressure at temperatures up to 300 0C.

The tripod is made of aluminum, which allows them to be sterilized at any temperature; this material provides lightness and durability. It can be used in water baths. The tripod has an individual packaging. Designed for storing test tubes.

Industrial drying cabinet SNOL (SHS) 4000/3-I2 V is designed for drying, tempering, aging, thermal testing and other types of heat treatment of various materials in an air environment at temperatures up to 350 (optionally up to 500) ° C with forced air convection in stationary conditions.

Temperature range, °C (Current +5) ... +105 Accuracy of temperature maintenance, °C ± 1 Temperature setting error, °C ± 1 Power consumption from AC 220 V, no more, 1600 W Number of jobs, pcs 6 The diameter of the workplace, mm 110 Volume of working fluid, l 24 Useful part of the bath / depth, mm 428x300 / 140 Overall dimensions, mm 530x330x220 Weight of the device without liquid is not more than kg 9

Total volume, l. 400 Number of compressors, pcs. 1 Height, mm 1950 Depth, mm 610 Width, mm 600 Weight, kg., no more 74 Rated power consumption, W 250 Maximum rated power, 250 W Voltage, 220 V Warranty, years 2 Final report on pre-qualification for compliance with the requirements of Good Practice of the EAEU Distribution: yes Additional transparent doors that prevent unwanted air exchange between compartments. Cold storage Auto refrigerator defrosting system Temperature in the refrigerator, °C +2... +15 Accuracy of temperature maintenance ±2°C Thermal card: yes Efficiency and energy consumption Electricity consumption, kWh/day, no more than 1.39 Climate class UHL 4.2 (i.e. for moderate and cold climate) Frequency, Hz 50 Approximate dimensions of the product with packaging Net weight of the product, kg 74 Gross weight of the product, kg 78.5 Volume of packaging, m3 0.827 The length of the package, m 0.65 The width of the package, m 0.63 Height of the package, m 2.02

The furnace can be used as a universal laboratory muffle furnace in metallurgical, jewelry and ceramic production, in orthopedic dentistry, chemical and food laboratories. Technical specifications The furnace operates at ambient temperatures from 10 to 35 ° C and relative humidity up to 80% at 25 ° C. The designation of the furnace when ordering: muffle furnace MIMP-10M, where 10 indicates the volume of the working chamber of the furnace in liters. Power consumption - 4500 W Dimensions of the working chamber W×D×B – 205×290×185 mm Dimensions W×D×B – 460×580×550 mm Weight – 52 kg

The chemical-resistant diaphragm pump PL.HM03.01.45 is designed for a wide range of industrial and laboratory tasks, mainly related to pumping vapors/gases. The pumping speed is 38 l/min with a maximum residual pressure of 45 mbar. The device has fairly compact dimensions. Operates from a standard 220 V power supply. Does not require special preparation before use. Post-warranty and warranty service is available throughout the Russian Federation. Characteristics Valve(s) material Standard: chloroprene copolymer NO-68-1 (TU 38 0051166-98) A country Russia Power, W 180 Overall dimensions, L×W×H, mm 289x140x200 Protection class acc. to DIN EN60529 IP20 Noise level, dB no more than 75 Nutrition 220 V/50 Hz Ultimate vacuum, mbar abs. 45 Excess pressure, bar. maximum allowable 0.5 Productivity, l/min 38 Fitting, inch (mm) External diameter, 9 mm. Maximum current, A 1.2 Device weight, kg 7.6 Working chamber material PTFE (polytetrafluoroethylene) Equipment Vacuum pump, cable, instructions, passport, packaging (vacuum regulator and spare parts are not included in the kit and must be ordered separately).

Technical specifications: Operating temperature range, °C -80...+100 Accuracy of temperature maintenance, °C ± 0.1 The discreteness of the temperature display, ° C 0.1 Cooling capacity at 20°C, W 510 Pump capacity in the discharge (suction) circuit, not less than, l/min 8 Volume of working fluid, l 11 Open part of the bath/depth, mm 175x135/200 Power supply, V/Hz 220/50 Power consumption, no more than 4.4 kW Overall dimensions, mm 535x555x985 Weight without working fluid, kg 80

for carrying out heat treatment according to pre-created programs. The presence of remote control and a number of software options allows you to use the product for long-term heat treatment modes. Vacuum drying cabinets can be used for: - gentle drying of thermo- and oxygen-sensitive substances, such as food, medicinal, cosmetic products; - complete removal of residual moisture from heat-sensitive components with a complex shape, such as components of electronic equipment, jewelry, watches and other precision mechanics; - removal of air when filling the molds with a compound, followed by solidification at a given temperature; - removing air from the product and replacing it with another necessary gas medium; - tempering, annealing or aging of metals with the appropriate processing temperature in a vacuum or protective environment; - drying of products after washing in flammable solvents (special version); - testing of devices under low pressure conditions under various temperature conditions.

Characteristics Maximum heating temperature of the working surface, °C 150 A country Russia Overall dimensions, L×W×H, mm 165.5x148x64 Protection class acc. to DIN EN60529 IP21 Color orange Mixing 150-2000 rpm Number of mixing places 1 Maximum volume of mixed liquid, l 2 Working surface of the plate (platform) fireproof glass (glass ceramics) Slab working surface size, LxW, mm 120x120 mm Accuracy of maintaining the plate temperature, % 1 Displayed temperature resolution, °C 0.1 External temperature sensor PT1000 Power consumption, W 300 Device weight, kg 0.9

Laboratory heating plate with two independent heating sections and with the possibility of programming heating modes. The heating platforms are made of duralumin. The size of the total heating surface: 440x284 mm. Heating temperature: 40-400 °C.

Measurement of dissolved oxygen concentration (CRC) in aqueous media. Continuous monitoring of the concentration of dissolved oxygen in the aeration tanks of treatment facilities, monitoring of the condition of water bodies, including fish-breeding open/closed pools. Warranty of 48 months for deliveries by RFShest channels Possibility of independent measurements at six points Automatic thermal compensation Air oxygen calibration Long-lasting sensor The service life of the sensor is at least 10 years The possibility of placing the display unit at a remote distance from the control points Up to 1000 meters Communication with external devices Galvanically isolated 4-20 or 0-20 mA current output and RS-485 port High contrast LED screen

The LOIP LT-424b modification device consists of an immersion thermostat-circulator LOIP LT-400 and a working bath with a lean-to hinged lid. Technical specifications: Temperature range: without external cooling, °C Current+10 ... +200 with tap water cooling °C Tvods+5 ...+200 Accuracy of temperature maintenance, °C ± 0.01 The error of setting the set temperature, no more than, ° C ± 0.02 Heater power, W 2200 Pump: max. flow rate, l/min 6...12 pressure, 0.4 bar Bath volume, l 24 The working fluid is water, silicone oil. Open part of the bath / depth, mm 360x296/200 Overall dimensions, mm 532x335x400 Weight, kg 15.8

The tripod is made of aluminum, which allows them to be sterilized at any temperature; this material provides lightness and durability. It can be used in water baths. The tripod has an individual packaging. Designed for storing test tubes.