Consumables

A set of ring seals for burettes of Mettler Toledo titrators of the T, DL, V series, as well as pumps for changing reagents of Solvent manager. In a package of 5 pcs. Material: fluorosiloxane rubber. The flat ring seal is used to seal the burette and bottle of the Mettler Toledo T50, T70, T90, G20, G10, V20, V30, C20, C30, DL titrators, as well as the pump and bottle of the Fischer reagent replacement module.

Polymethylsiloxane liquid for the operating temperature range +90...+300 °C. In aluminum cans it is supplied with a volume of 10 liters. The density is 0.966 g/cm3.

It is intended for taking samples of biological material, with the possibility of their subsequent safe transportation to the laboratory for analysis. It is convenient for taking flushes, including sanitary ones. Non-sterile.

Polymethylsiloxane liquid for the operating temperature range 0...+200 °C. In aluminum cans it is supplied with a volume of 10 liters. The density is 0.960 g/cm3.

Polymethylsiloxane liquid for the operating temperature range 0...+180 °C. It is supplied in aluminum cans with a volume of 10 liters. The density is 0.950 g/cm3.

Mineral vacuum oil VACMA OIL 500 is made from high-quality base components with a composition of additives that improve operational properties, such as anti-wear, adhesive, anti-shock, anti-corrosion, demulsifying, anti-foam. The VACMA OIL 500 is used for high-vacuum steam oil pumps. The mineral vacuum oil VACMA OIL 500 is designed to work at a maximum of 80°C. If the temperature is increased to 90°C, the oil life will be reduced by half, if it is operated at very low temperatures, water vapor can condense in the pump, thereby worsening the lubricating properties of the oil.

The Ames transport environment is another modification of the basic Stewart transport environment. This medium is capable of supporting microorganisms such as Neisseria sp., Haemophius sp., Corynebacteria, Streptococci, Enterobacteriaceae, etc. for up to 3 days, however, cultivation during the first 24 hours gives the best results. Coal absorbs substances that are toxic to bacteria. The tampon probe is packed in a high-impact PP tube (12*150 mm). The test tube is provided with a label indicating: batch number, date of sterilization, expiration date, manufacturing company, supplier company, and also provides a place for applying information about the patient and the sample. The edge of the label is fastened with a stopper that closes the tube with a tampon - the label serves as the control of the first opening. Store at a temperature not lower than + 5 °C and not higher than + 25 °C.

Consumables Name Designation Unit of measurement Consumables for conducting coagulometric studies according to TU 9398-003-92819512-2013: disposable cuvette RU No. RZN 2016/4557 only for in vitro ASTR. 928195512.001-002 pcs. Consumables for conducting coagulometric studies according to TU 9398-003-92819512-2013: magnetic stirrer RU No.RZN 2016/4557 only for in vitro diagnostics ASTR. 928195512.001-003 pcs. Recording paper without diagram grid 806012 outer winding - pcs. Recording paper without diagram grid 576012 outer winding - pcs. Thermal and ink registration tape diagram d/lab. 110x30hH - roll. Reagents for automatic coagulometer AK-37 Name Designation Unit of measurement Reagent for determining prothrombin time on an automatic coagulometer AK (Technical Plate test) Art. 728 set A set of reagents for determining activated partial thromboplastin time on an automatic coagulometer AK (APTV-El-test) Art. 725 set Reagent for determining thrombin time on an automatic coagulometer AK (Thrombo-test) Art. 729 set A set of reagents for determining the concentration of fibrinogen on an automatic coagulometer AK (MultitEch-Fibrinogen) Art. 726 set A set of reagents for the determination of antithrombin on an automatic coagulometer AK (Chromotech-Antithrombin) Art. 750 set A set of reagents for the determination of plasminogen on an automatic coagulometer AK (Chromotech-Plasminogen) Art. 751 set A set of calibrators for determining the concentration of fibrinogen on an automatic coagulometer AK (Fibrinogen calibrator) Art. 730 set Calibration plasma for automatic coagulometer AK (AK calibrator) Art. 780 set Control plasma with normal range of values for automatic coagulometer AK (AK control N) Art. 781 set Control plasma with pathological range of values for automatic coagulometer AK (AK control P) Art. 782 set Control plasma with normal range of values for automatic coagulometer AK (AK plasma N) Art. 783 set Control plasma with pathological range of values for automatic coagulometer AK (AK plasma P) Art. 784 set

It is intended for taking and storing samples of biological material for the purpose of safe transportation to the laboratory for analysis. It is convenient for taking flushes, including sanitary ones. Non-sterile.

Disposable boards for cutting anatomical specimens 150*200 mm. Made of foam cardboard, according to their characteristics, they replace boards for cutting anatomical samples from other materials without loss of quality. They are convenient and easy to use and dispose of. The surface structure (coated coating) prevents the sample from sliding when cutting. It is possible to manufacture in various versions according to the customer's layout. The configuration of the product has a millimeter scale with digital markings: vertically and horizontally, circles of different diameters are applied , and a field for recording information is also provided. Color: White Size: 150*200 mm. Packing: 1/5/15/ 20 pieces Material: Foam board

The Ames transport environment is another modification of the basic Stewart transport environment. This medium is capable of supporting microorganisms such as Neisseria sp., Haemophius sp., Corynebacteria, Streptococci, Enterobacteriaceae, etc. for up to 3 days, however, cultivation during the first 24 hours gives the best results. The tampon probe is packed in a high-impact PP tube (12*150 mm). The test tube is provided with a label indicating: batch number, date of sterilization, expiration date, manufacturer, supplier, registration certificate, and also provides a place for applying information about the patient and the sample. The edge of the label is fastened with a stopper that closes the tube with a tampon - the label serves as the control of the first opening. Store at a temperature not lower than + 5 °C and not higher than + 25 °C.

It is intended for taking samples of biological material, with the possibility of their subsequent safe transportation to the laboratory for analysis. It is convenient for taking flushes. Sterile.