Consumables

Septa for titrators are made of fluorosiloxane rubber. The main difference between this material and traditional silicone is the presence of trifluoropropyl groups in the chain, which give fluorosiloxane rubber chemical resistance to solvents, fuels, oils, acids, alkalis, and a number of oxidants, as well as a wide operating temperature range from -60 to +200℃. Characteristics of the septa produced by us for the L 51108740 titrator: Diameter -12 mm Thickness - 2 mm Color - white Density -1.50 ± 0.05 g/cm3 Hardness -60- 70 units. Shore A

Ampoules with certified solutions (AS) contain solutions of a number of substances with a certified concentration. AS are designed for independent preparation by the consumer of certified combined-cycle gas mixtures while monitoring the quality of measurement results and the stability of calibration data. The use of AS for this purpose is prescribed in the methods of analysis FR.1.31.2014.17787, FR.1.31.2014.17955, FR.1.31.2015.20512, FR.1.31.2015.21296, FR.1.31.2016.23707, FR..1.31.2016.23997 and FR.1.31.2016.239967 for FGH chromatographs.

Mineral vacuum oil VACMA OIL 300 is made from high-quality base components with a composition of additives that improve operational properties, such as anti-wear, adhesive, anti-shock, anti-corrosion, demulsifying, anti-foam. The VACMA OIL 300 is used for vacuum booster steam oil pumps. The VACMA OIL 300 mineral vacuum oil is designed to work at a maximum of 80°C. If the temperature is increased to 90°C, the oil life will be reduced by half, if it is operated at very low temperatures, then water vapor can condense in the pump, thereby worsening the lubricating properties of the oil.

Polymethylsiloxane liquid for the operating temperature range -30...+150 °C. In aluminum cans it is supplied with a volume of 10 liters. The density is 0.935 g/cm3.

PCR film, adhesive. High optical transparency. Low autofluorescence Hydrophobic adhesive is resistant to turbidity. Low level of extractable substances in various solvents. The film is similar in all its characteristics to imported samples. Recommendations for use: The best sealing results are achieved when using an applicator or roller. Perforation is applied. Temperature range: -20°C + 120°C Material: PET Packaging: 100 sheets

Polymethylsiloxane liquid for the operating temperature range -40...+100 °C. In aluminum cans it is supplied with a volume of 10 liters. The density is 0.918 g/cm3.

It is intended for taking samples of biological material, with the possibility of their subsequent safe transportation to the laboratory for analysis. Non - sterile

A block of gas filters for lines with a pressure of up to 15 MPa. The volume, length, connection dimensions, type of connections with supply pipelines are specified when ordering.

Stewart's medium is a semi-liquid, nutrient-poor substrate and is designed to preserve and transport a wide range of microorganisms, such as Neisseria gonorrhoeae, Haemophilus influenzae, Salmonella sp. and others . Bacterial cultures are guaranteed to remain viable for up to 48 hours at a temperature of 15-20 ° C. The tampon probe is packed in a shock-resistant PP tube (12*150 mm). The test tube is provided with a label indicating: batch number, date of sterilization, expiration date, manufacturer, supplier, registration certificate, and also provides a place for applying information about the patient and the sample. The edge of the label is fastened with a stopper that closes the tube with a tampon - the label serves as the control of the first opening. Store at a temperature not lower than + 5 °C and not higher than + 25 °C.

The Ames transport environment is another modification of the basic Stewart transport environment. This medium is capable of supporting microorganisms such as Neisseria sp., Haemophius sp., Corynebacteria, Streptococci, Enterobacteriaceae, etc. for up to 3 days, however, cultivation during the first 24 hours gives the best results. The tampon probe is packed in a high-impact PP tube (12*150 mm). The test tube is provided with a label indicating: batch number, date of sterilization, expiration date, manufacturer, supplier, registration certificate, and also provides a place for applying information about the patient and the sample. The edge of the label is fastened with a stopper that closes the tube with a tampon - the label serves as the control of the first opening. Store at a temperature not lower than + 5 °C and not higher than + 25 °C.

It is used for slow and gradual heating of laboratory dishes in sand baths.

It is intended for taking samples of biological material, with the possibility of their subsequent safe transportation to the laboratory for analysis. It is convenient for taking flushes. Sterile.