Catalog
Back to search results
PCR tablet for 96 wells 0.2 ml., without skirt, standard profile, (Natural)
Back to search results
PCR tablet for 96 wells 0.2 ml., without skirt, standard profile, (Natural)
from 1 600 ₽
from 1 600 ₽
Go to the manufacturer's website
PCR tablet for 96 wells 0.2 ml., without skirt, standard profile, (Natural)
A PCR tablet for 96 wells of 0.1 ml.
from 100 ₽
96-hole PCR tablet, natural, thin-walled, low-profile.
Due to the low-profile design of the PCR reagent, less space is available for the transition to the gas phase during heating, which reduces the accumulation on the walls of the tubes. Thus, stable reaction conditions are maintained, and a more efficient reaction is achieved.
The presence of a skirt — Without a skirt
Material — Polypropylene
The wall thickness is 0.3-0.35 mm.
Color — Natural
Profile: Low
VIS MED
Berdsk
Produced in: Berdsk, Novosibirsk region
PCR TABLET FOR 96 WELLS 0.2 ML., WITHOUT SKIRT, STANDARD PROFILE (WHITE)
from 1 600 ₽
PCR tablet for 96 wells 0.2 ml., without skirt, standard profile (White)
VIS MED
Berdsk
Produced in: Berdsk, Novosibirsk region
PCR tablet for 96 wells 0.2 ml stripped
from 160 ₽
The 96-hole tablet of the standard profile is made of ultrapure polypropylene for PCR.
The wells have thin walls (0.3-0.35 mm.),
providing rapid heat exchange, allowing optimal amplification results to be achieved.
The wells are easily separated from each other in any direction into any number of tubes (up to a single one).
Compatible with SFG adapters for PCR amplifiers.
Tablets are convenient both for high-performance laboratories and for single analyses.
The presence of a skirt — Without a skirt
Material — Ultrapure Polypropylene
The wall thickness is 0.3 — 0.35 mm.
Color — White
Sterility — Heat treatment in an autoclave at 121 °C for 15 minutes.
Marking — Alphanumeric with engraving
Profile: Standard
VIS MED
Berdsk
Produced in: Berdsk, Novosibirsk region
The film for PCR tablet, adhesive 142 * 80 mm.
from 3 500 ₽
PCR film, adhesive.
High optical transparency.
Low autofluorescence Hydrophobic adhesive is resistant to turbidity.
Low level of extractable substances in various solvents.
The film is similar in all its characteristics to imported samples.
Recommendations for use: The best sealing results are achieved when using an applicator or roller.
Perforation is applied.
Temperature range: -20°C + 120°C
Material: PET
Packaging: 100 sheets
VIS MED
Berdsk
Produced in: Berdsk, Novosibirsk region
Film for PCR dies, adhesive, for RealTime
The film is suitable for all types of thermal cycling, including real-time PCR.
Pressure-sensitive adhesive film does not stick to gloves.
This premium product guarantees tightness during amplification.
Similar to imported samples.
Temperature range: -70+100 °C
Material: Polyolefin
Packaging: 100 pcs.
VIS MED
Berdsk
Produced in: Berdsk, Novosibirsk region
Silicone mat for PCR tablets
from 400 ₽
Format, number of holes: 96
Material of manufacture: Silicone
Product Color: Colorless
Alphanumeric markings are applied
Temperature range: -50 to +130 °C
VIS MED
Berdsk
Produced in: Berdsk, Novosibirsk region
Adhesive sealing films for PCR (separable)
from 12 000 ₽
Adhesive sealing films for PCR (separable)
Material: PET, pharmaceutical grade glue, no pollution.
Absence of DNase, RNase, DNA, endotoxin, PCR inhibitor and contamination of the heat source.
Product advantage:
The film can be used as a whole or divided into 8 strips for use.
Product Usage:
Suitable for quantitative fluorescence detection by PCR.
High optical transparency, no spontaneous fluorescence.
Size: 128*99 mm.
Temperature range: -20+120 °C
Packing: 50 pieces.
VIS MED
Berdsk
Produced in: Berdsk, Novosibirsk region
Adhesive film for EIA microplate 130*90 mm
from 1 200 ₽
Adhesive Film for EIA tablets is produced for standard studies.
Non-sterile.
Optically transparent.
The film securely seals the tablet.
Moisture-proof, non-toxic, prevents excessive evaporation of water from the wells of the microplate, sedimentation of reagents on their walls, and as a result, the edge effect.
Prevents false positive results during EIA.
A convenient configuration allows you to cut and detach the film according to the number of holes used in one analysis statement.
There is 1 notch in width and 1 notch in length.
Thickness: 80 microns.
Size:130*90mm
Composition: PVC
Application temperature: -40°C to +80°C
Color: Transparent
Packaging: 100 pcs.
VIS MED
Berdsk
Produced in: Berdsk, Novosibirsk region
PCR TABLET FOR 96 WELLS 0.2 ML., WITHOUT SKIRT, STANDARD PROFILE (WHITE)
from 1 600 ₽
PCR tablet for 96 wells 0.2 ml., without skirt, standard profile (White)
VIS MED
Berdsk
Produced in: Berdsk, Novosibirsk region
PCR tablet for 96 wells 0.2 ml stripped
from 160 ₽
The 96-hole tablet of the standard profile is made of ultrapure polypropylene for PCR.
The wells have thin walls (0.3-0.35 mm.),
providing rapid heat exchange, allowing optimal amplification results to be achieved.
The wells are easily separated from each other in any direction into any number of tubes (up to a single one).
Compatible with SFG adapters for PCR amplifiers.
Tablets are convenient both for high-performance laboratories and for single analyses.
The presence of a skirt — Without a skirt
Material — Ultrapure Polypropylene
The wall thickness is 0.3 — 0.35 mm.
Color — White
Sterility — Heat treatment in an autoclave at 121 °C for 15 minutes.
Marking — Alphanumeric with engraving
Profile: Standard
VIS MED
Berdsk
Produced in: Berdsk, Novosibirsk region
Reagent bath 30 ml (PVC)
from 10 ₽
Volume: 30 ml
Material of manufacture: PVC
Dimensions: 100 x 50 x 19 mm
It is intended for filling with a solution (chemical reagents, reagents, biological fluids, etc. in concentrations used in clinical and diagnostic laboratories, with the exception of concentrated organic solvents) with the subsequent selection of this solution by dispensers during diagnostic studies in medical and preventive and research laboratories.
VIS MED
Berdsk
Produced in: Berdsk, Novosibirsk region
Reagent bath 30 ml. PS / White
from 10 ₽
Volume: 30 ml
Material of manufacture: PS
Product Color: White
Dimensions: 100 x 50 x 19 mm
It is intended for filling with a solution (chemical reagents, reagents, biological fluids, etc. in concentrations used in clinical and diagnostic laboratories, with the exception of concentrated organic solvents) with the subsequent selection of this solution by dispensers during diagnostic studies in medical and preventive and research laboratories.
VIS MED
Berdsk
Produced in: Berdsk, Novosibirsk region