Heat carrier PMS-20

The film is suitable for all types of thermal cycling, including real-time PCR. Pressure-sensitive adhesive film does not stick to gloves. This premium product guarantees tightness during amplification. Similar to imported samples. Temperature range: -70+100 °C Material: Polyolefin Packaging: 100 pcs.

Format, number of holes: 96 Material of manufacture: Silicone Product Color: Colorless Alphanumeric markings are applied Temperature range: -50 to +130 °C

Polymethylsiloxane liquid for the operating temperature range -40...+100 °C. In aluminum cans it is supplied with a volume of 10 liters. The density is 0.918 g/cm3.

Adhesive sealing films for PCR (separable) Material: PET, pharmaceutical grade glue, no pollution. Absence of DNase, RNase, DNA, endotoxin, PCR inhibitor and contamination of the heat source. Product advantage: The film can be used as a whole or divided into 8 strips for use. Product Usage: Suitable for quantitative fluorescence detection by PCR. High optical transparency, no spontaneous fluorescence. Size: 128*99 mm. Temperature range: -20+120 °C Packing: 50 pieces.

It is used for slow and gradual heating of laboratory dishes in sand baths.

Polymethylsiloxane liquid for the operating temperature range -30...+150 °C. In aluminum cans it is supplied with a volume of 10 liters. The density is 0.935 g/cm3.

Silicone mat for PCR tablets (pierced) Format, number of holes: 96 Material of manufacture: Silicone Product Color: Natural Relief, alphanumeric markings are applied Temperature range: -50 to +130 °C Packing quantity: 5 pieces It is possible to manufacture in other colors, in agreement with the customer.

It provides high analytical accuracy and is convenient for use and storage.

Polymethylsiloxane liquid for the operating temperature range +90...+300 °C. In aluminum cans it is supplied with a volume of 10 liters. The density is 0.966 g/cm3.

PCR film, adhesive. High optical transparency. Low autofluorescence Hydrophobic adhesive is resistant to turbidity. Low level of extractable substances in various solvents. The film is similar in all its characteristics to imported samples. Recommendations for use: The best sealing results are achieved when using an applicator or roller. Perforation is applied. Temperature range: -20°C + 120°C Material: PET Packaging: 100 sheets

Adhesive Film for EIA tablets is produced for standard studies. Non-sterile. Optically transparent. The film securely seals the tablet. Moisture-proof, non-toxic, prevents excessive evaporation of water from the wells of the microplate, sedimentation of reagents on their walls, and as a result, the edge effect. Prevents false positive results during EIA. A convenient configuration allows you to cut and detach the film according to the number of holes used in one analysis statement. There is 1 notch in width and 1 notch in length. Thickness: 80 microns. Size:130*90mm Composition: PVC Application temperature: -40°C to +80°C Color: Transparent Packaging: 100 pcs.

Polymethylsiloxane liquid for the operating temperature range 0...+200 °C. In aluminum cans it is supplied with a volume of 10 liters. The density is 0.960 g/cm3.

Mineral vacuum oil VACMA OIL 500 is made from high-quality base components with a composition of additives that improve operational properties, such as anti-wear, adhesive, anti-shock, anti-corrosion, demulsifying, anti-foam. The VACMA OIL 500 is used for high-vacuum steam oil pumps. The mineral vacuum oil VACMA OIL 500 is designed to work at a maximum of 80°C. If the temperature is increased to 90°C, the oil life will be reduced by half, if it is operated at very low temperatures, water vapor can condense in the pump, thereby worsening the lubricating properties of the oil.

Mineral vacuum oil VACMA OIL 300 is made from high-quality base components with a composition of additives that improve operational properties, such as anti-wear, adhesive, anti-shock, anti-corrosion, demulsifying, anti-foam. The VACMA OIL 300 is used for vacuum booster steam oil pumps. The VACMA OIL 300 mineral vacuum oil is designed to work at a maximum of 80°C. If the temperature is increased to 90°C, the oil life will be reduced by half, if it is operated at very low temperatures, then water vapor can condense in the pump, thereby worsening the lubricating properties of the oil.

Block of well microaquariums 5 rows of 9 holes GOST 31674-2012

The stick for mixing reagents is disposable, 120 mm. It is used as an auxiliary product during immunological reactions in the well of the tablet, for mixing samples, reagents, for decanting during sediment separation, separation of blood clot from serum, as a spoon-spatula for weighing bulk substances, spot sampling of semi-liquid and solid clinical, food samples in containers intended for this purpose. The sticks are a plastic rod, at the end of which there is a flattening for ease of use. The flat side of the stick is convenient to collect powder. The sticks are made of impact-resistant polystyrene. Chemically resistant. Production Russia. It is possible to change the color of the goods, the quantity in the package in agreement with the customer!