Catalog
Back to search results
SHVM NVK 1500 MON+ Metal fume cupboard with plumbing (1560×750×2250)
Back to search results
SHVM NVK 1500 MON+ Metal fume cupboard with plumbing (1560×750×2250)
from
123 771 ₽
Manufacturer:
NV LAB
Location:
Moscow
from
123 771 ₽
Go to the manufacturer's website
The SHVM NVK 1500 MON+ is a large metal fume cupboard with plumbing fixtures for laboratory. The table top is made of monolithic ceramics, its width is 1200 mm.
External dimensions of the cabinet (W×D×H): 1560×750×2250 mm.
Internal dimensions of the camera (W×D×H): 1500×600×1168 mm.
Table top material: monolithic ceramic.
A reliable and durable fume cupboard for laboratory
The table top is made of monolithic ceramics. It is perfect for all chemical laboratories, including those that work with substances at high temperatures. It perfectly tolerates heat, is moisture-resistant, resistant to acids and alkalis. High-temperature equipment (drying cabinets, muffle furnaces) can be placed on the countertop. The width of the ceramic plate is 1200 mm, that is, there will be one seam in the countertop.
The cabinet is mounted on an all-welded metal frame covered with durable powder paint. All panels are made of polymer-coated metal. The front anti-spill side is made of polished stainless steel AISI-316.
There are four exhaust zones in the working chamber: they are located in the hood of the exhaust box and just above the level of the countertop. Diameter of the flange for connection to the ventilation system: 150 mm. The hood area is also made of metal.
The protective screen of the cabinet can be easily lifted with one hand. It folds up and when lifted does not increase the overall height of the cabinet. It is made of 4 mm tempered glass in an aluminum frame.
The small sink-drain is made of polypropylene, it is resistant to aggressive chemicals. Its internal dimensions: 218×115×122 mm. The faucet is made of brass, covered with polypropylene.
The sockets and the switch of the LED lamp are located outside the working area, on the right-hand side of the front panel of the cabinet. The sockets are splash-proof and are designed for current up to 16 A and voltage up to 250 V. Next to the switch there is a toggle switch of the automatic emergency power off.
The reagents needed for work can be placed in the lower cabinet. The cabinet is also made of metal. It has three swing doors and one fixed shelf. It has its own hood (pipe diameter 100 mm), which can be connected to the general exhaust system of the cabinet using the nozzle included in the cabinet kit.
The cabinet legs are adjustable in height, allowing you to place the cabinet even on a rather uneven floor.
Advantages of the SHVM NVK 1500 MON+ cabinet
A metal fume cupboard with plumbing, suitable for any laboratory;
The wide table top allows you to organize the workplace as conveniently as possible;
It is durable, reliable and very convenient to use;
The protective screen is made of tempered glass;
The hood is built into the cabinet, reagents can be safely stored in it.
Application of the SHVM NVK 1500 MON+ cabinet
Exhaust laboratory cabinets are used when working with toxic and harmful volatile materials, with clean materials, with dissolution or decomposition under heat treatment, when conducting sample analysis.
Exhaust cabinets of the NV-Comfort series are used in laboratories of the widest profile: at food and light industry enterprises, in higher educational and scientific institutions, in chemistry classrooms at school, in quality control centers, medical organizations.
External dimensions of the cabinet (W×D×H): 1560×750×2250 mm.
Internal dimensions of the camera (W×D×H): 1500×600×1168 mm.
Table top material: monolithic ceramic.
A reliable and durable fume cupboard for laboratory
The table top is made of monolithic ceramics. It is perfect for all chemical laboratories, including those that work with substances at high temperatures. It perfectly tolerates heat, is moisture-resistant, resistant to acids and alkalis. High-temperature equipment (drying cabinets, muffle furnaces) can be placed on the countertop. The width of the ceramic plate is 1200 mm, that is, there will be one seam in the countertop.
The cabinet is mounted on an all-welded metal frame covered with durable powder paint. All panels are made of polymer-coated metal. The front anti-spill side is made of polished stainless steel AISI-316.
There are four exhaust zones in the working chamber: they are located in the hood of the exhaust box and just above the level of the countertop. Diameter of the flange for connection to the ventilation system: 150 mm. The hood area is also made of metal.
The protective screen of the cabinet can be easily lifted with one hand. It folds up and when lifted does not increase the overall height of the cabinet. It is made of 4 mm tempered glass in an aluminum frame.
The small sink-drain is made of polypropylene, it is resistant to aggressive chemicals. Its internal dimensions: 218×115×122 mm. The faucet is made of brass, covered with polypropylene.
The sockets and the switch of the LED lamp are located outside the working area, on the right-hand side of the front panel of the cabinet. The sockets are splash-proof and are designed for current up to 16 A and voltage up to 250 V. Next to the switch there is a toggle switch of the automatic emergency power off.
The reagents needed for work can be placed in the lower cabinet. The cabinet is also made of metal. It has three swing doors and one fixed shelf. It has its own hood (pipe diameter 100 mm), which can be connected to the general exhaust system of the cabinet using the nozzle included in the cabinet kit.
The cabinet legs are adjustable in height, allowing you to place the cabinet even on a rather uneven floor.
Advantages of the SHVM NVK 1500 MON+ cabinet
A metal fume cupboard with plumbing, suitable for any laboratory;
The wide table top allows you to organize the workplace as conveniently as possible;
It is durable, reliable and very convenient to use;
The protective screen is made of tempered glass;
The hood is built into the cabinet, reagents can be safely stored in it.
Application of the SHVM NVK 1500 MON+ cabinet
Exhaust laboratory cabinets are used when working with toxic and harmful volatile materials, with clean materials, with dissolution or decomposition under heat treatment, when conducting sample analysis.
Exhaust cabinets of the NV-Comfort series are used in laboratories of the widest profile: at food and light industry enterprises, in higher educational and scientific institutions, in chemistry classrooms at school, in quality control centers, medical organizations.
SHVM NVK 1200 MON Metal fume cupboard without plumbing (1260×750×2250)
from
110 927 ₽
The SHVM NVK 1200 MON is a metal fume cupboard for laboratory. The table top is made of monolithic ceramics, its width is 1200 mm.
External dimensions of the cabinet (W×D×H): 1260×750×2250 mm.
Internal dimensions of the camera (W×D×H): 1200×600×1168 mm.
Table top material: monolithic ceramic.
Reliable and durable construction
The table top is made of a single ceramic plate with a width of 1200 mm. The seamless monolith of the countertop provides the highest reliability and durability.
THe ceramics are great for all chemical laboratories, including those that work with substances at high temperatures. It perfectly tolerates heat, is moisture-resistant, resistant to acids and alkalis. High-temperature equipment (drying cabinets, muffle furnaces) can be placed on the table top.
The cabinet has an all-welded metal frame covered with durable powder paint. All panels are made of polymer-coated metal. The front anti-spill side is made of polished stainless steel AISI-316.
There are four exhaust zones in the working chamber: they are located in the hood of the exhaust box and just above the level of the countertop. Diameter of the flange for connection to the ventilation system: 150 mm. The hood area is also made of metal.
The protective screen of the cabinet can be easily lifted with one hand. It folds up and when lifted does not increase the overall height of the cabinet. It is made of 4 mm tempered glass in an aluminum frame.
The sockets and the switch of the LED lamp are located outside the working area, on the right-hand side of the front panel of the cabinet. The sockets are splash-proof and are designed for current up to 16 A and voltage up to 250 V. Next to the switch there is a toggle switch of the automatic emergency power off.
The reagents needed for work can be placed in the lower cabinet also made of metal. The cabinet has three swing doors and one fixed shelf. It has its own hood (pipe diameter 100 mm), which can be connected to the general exhaust system of the cabinet using the nozzle included in the cabinet kit.
The cabinet legs are adjustable in height, allowing you to place the cabinet even on a rather uneven floor.
Advantages of the SHVM NVK 1200 MON cabinet
A metal fume cupboard suitable for any laboratory;
Durable, reliable and very convenient to use;
The protective screen is made of tempered glass;
A hood is built into the cabinet, reagents can be safely stored in it.
Application of the SHVM NVK 1200 MON cabinet
Exhaust laboratory cabinets are used when working with toxic and harmful volatile materials, with clean materials, with dissolution or decomposition under heat treatment, when conducting sample analysis.
Fume cupboards of the NV-Comfort series are used in laboratories of the widest profile: at food and light industry enterprises, in higher educational and scientific institutions, in chemistry classrooms at school, in quality control centers, medical organizations.
NV LAB
Moscow
Produced in: Moscow, Moscow region
SHVM NVK 1500 MON Metal fume cupboard without plumbing (1560×750×2250)
from
120 792 ₽
The SHVM NVK 1500 MON is a metal fume cupboard for laboratory. The table top is made of monolithic piece of ceramics.
External dimensions of the cabinet (W×D×H): 1560×750×2250 mm.
Internal dimensions of the camera (W×D×H): 1500×600×1168 mm.
Table top material: monolithic ceramic.
A reliable and durable laboratory cabinet
The table top is made of monolithic ceramics. It is perfect for all chemical laboratories, including those that work with substances at high temperatures. It perfectly tolerates heat, is moisture-resistant, resistant to acids and alkalis. High-temperature equipment (drying cabinets, muffle furnaces) can be placed on the countertop. The width of the ceramic plate is 1200 mm, that is, there will be one seam in the countertop.
The cabinet is mounted on an all-welded metal frame covered with durable powder paint. All panels are made of polymer-coated metal. The front anti-spill side is made of the AISI-316 polished stainless steel.
There are four exhaust zones in the working chamber: they are located in the hood of the exhaust box and above the level of the countertop. Diameter of the flange for connection to the ventilation system: 150 mm. The hood area is also made of metal.
The protective screen of the cabinet can be easily lifted with one hand. It folds up and when lifted does not increase the overall height of the cabinet. It is made of 4-mm tempered glass in an aluminum frame.
The sockets and the switch of the LED lamp are located outside the working area, on the right-hand side of the front panel of the cabinet. The sockets are splash-proof and are designed for current up to 16 A and voltage up to 250 V. Next to the switch there is a toggle switch of the automatic emergency power off.
The reagents needed for work can be placed in the lower cabinet cabinet. The cabinet is also made of metal. The cabinet has swing doors and one non-removable shelf. It has its own hood (pipe diameter 100 mm), which can be connected to the general exhaust system of the cabinet using the nozzle included in the cabinet kit.
The cabinet legs are adjustable in height, allowing you to place the cabinet even on a rather uneven floor.
Advantages of the SHVM NVK 1500 MON cabinet
A metal fume cupboard, perfect for any laboratory;
The wide table top allows you to equip the workplace as conveniently as possible;
It is durable, reliable and very convenient to use;
The protective screen is made of tempered glass;
The cupboard is built into the cabinet, reagents can be safely stored in it.
Application of the SHVM NVK 1500 MON cabinet
Exhaust laboratory cabinets are used when working with toxic and harmful volatile materials, with clean materials, with dissolution or decomposition under heat treatment, when conducting sample analysis.
Fume cupboards of the NV-Comfort series are used in laboratories of the widest profile: at food and light industry enterprises, in higher educational and scientific institutions, in chemistry classrooms at school, in quality control centers, medical organizations.
NV LAB
Moscow
Produced in: Moscow, Moscow region
SHVM NVK 1200 MON+ Metal fume cupboard with plumbing (1260×750×2250)
from
116 089 ₽
The SHVM NVK 1200 MON+ is a metal fume cupboard with plumbing for work in the laboratory. The table top is made of monolithic ceramics, its width is 1200 mm.
External dimensions of the cabinet (W×D×H): 1260×750×2250 mm.
Internal dimensions of the camera (W×D×H): 1200×600×1168 mm.
Table top material: monolithic ceramic.
A reliable and durable fume cupboard for the laboratory
The table top is made of a single ceramic plate with a width of 1200 mm. The seamless monolith of the countertop provides the highest reliability and durability.
The ceramics are great for all chemical laboratories, including those that work with substances at high temperatures. It perfectly tolerates heat, is moisture-resistant, resistant to acids and alkalis. High-temperature equipment (drying cabinets, muffle furnaces) can be placed on the table top.
The cabinet is mounted on an all-welded metal frame covered with durable powder paint. All panels are made of polymer-coated metal. The front anti-spill side is made of AISI-316 polished stainless steel.
There are four exhaust zones in the working chamber: they are located in the hood of the exhaust box and above the level of the countertop. Diameter of the flange for connection to the ventilation system: 150 mm. The hood area is also made of metal.
The protective screen of the cabinet can be easily lifted with one hand. It folds up and when lifted does not increase the overall height of the cabinet. It is made of 4 mm tempered glass in an aluminum frame.
The small sink-drain is made of polypropylene, resistant to aggressive chemicals. Its internal dimensions: 218×115×122 mm. The faucet is made of brass and covered with polypropylene.
The sockets and the switch of the LED lamp are located outside the working area, on the right-hand side of the front panel of the cabinet. The sockets are splash-proof and designed for current up to 16 A and voltage up to 250 V. Next to the switch there is a toggle switch of the automatic emergency power off.
The reagents needed for work can be placed in the lower cabinet. The cabinet is also made of metal. It has three swing doors and one fixed shelf. It has its own hood (pipe diameter 100 mm), which can be connected to the general exhaust system of the cabinet using the nozzle included in the cabinet kit.
The cabinet legs are adjustable in height, allowing you to place the cabinet even on a rather uneven floor.
Advantages of the cabinet SHVM NVK 1200 MON+
A metal fume cupboard with plumbing, an excellent choice for any laboratory;
Durable, reliable and very convenient to use;
The protective screen is made of tempered glass;
The hood is built into the cabinet, reagents can be safely stored in it.
Application of the SHVM NVK 1200 MON+ cabinet
Exhaust laboratory cabinets are used when working with toxic and harmful volatile materials, with clean materials, with dissolution or decomposition under heat treatment, when conducting sample analysis.
Fume cupboards of the NV-Comfort series are used in laboratories of the widest profile: at food and light industry enterprises, in higher educational and scientific institutions, in chemistry classrooms at school, in quality control centers, medical organizations.
NV LAB
Moscow
Produced in: Moscow, Moscow region