Catalog
Back to search results
NV-1800 SHVD-U Two-frame fume cupboard with plumbing and countertop made of granite tiles
Back to search results
NV-1800 SHVD-U Two-frame fume cupboard with plumbing and countertop made of granite tiles
from
73 329 ₽
from
73 329 ₽
Go to the manufacturer's website
The Korsa NV-1800 SHVD-U laboratory fume cupboard is a two—frame cabinet with a ceramic granite countertop 1800 mm wide and a small built-in polypropylene sink. This is the largest cabinet with plumbing fixtures in the "NV" line.
External dimensions of the cabinet (W×D×H): 1800×700×1960 mm.
Dimensions of the working area (W×D×H): 1768×540×750 mm.
Table top: granite tiles.
Convenient fume cupboards for comfortable work in the laboratory
The cabinet is available in two versions: with a hood from the lower cabinet and without it. In a cabinet with such a hood, various aggressive reagents can be stored, in a cabinet without a hood, it is recommended to store only laboratory glass or instruments.
Working surface material: porcelain tile. It is moisture-resistant and perfectly withstands high temperatures. It is resistant to prolonged exposure to concentrated acids, alkalis and organic solvents. It has limited resistance to hydrofluoric acid. This is one of the most popular types of countertops for laboratory furniture.
A small sink-drain is made of polypropylene resistant to aggressive chemicals. Its diameter is 135 mm and its depth is 110 mm.
The working area is closed by two independent lifting frames with counterweights. As standard, there are two exhaust zones: the hood of the exhaust box and the level of the countertop. Diameter of the flange for connection to the ventilation system: 150 mm. A version with an additional hood from the lower cabinet is also available.
Working area size (W×D×H): 1768×540×750 mm. Please note that the cabinet narrows upwards. At a height of 50 cm, the depth of the working area will be 410 mm, at a height of 70 cm: 365 mm. If you need to place high equipment, then make sure that it corresponds to the dimensions of the camera, otherwise you will not be able to close the cabinet.
The height of the raised glass above the cabinet: 510 mm, that is, when the glass is raised, the height of the cabinet will be 2470 mm.
The NV-1800 SHVD-U fume cupboard is equipped with a fluorescent lamp with a switch and two sockets, one of them with grounding. Sockets have the IP20 degree of protection, the maximum load on them: 1.5 kW.
The basis of the working chamber is an all-welded metal frame in powder coating. Load-bearing laminated panels (chipboard with a thickness of 16 mm) are edged on the facade with a durable PVC edge with a thickness of 2 mm, which increases the impact resistance and mechanical strength of the products.
The cabinet legs are adjustable in height within two centimeters, allowing you to place the cabinet even on a rather uneven floor.
External dimensions of the cabinet (W×D×H): 1800×700×1960 mm.
Dimensions of the working area (W×D×H): 1768×540×750 mm.
Table top: granite tiles.
Convenient fume cupboards for comfortable work in the laboratory
The cabinet is available in two versions: with a hood from the lower cabinet and without it. In a cabinet with such a hood, various aggressive reagents can be stored, in a cabinet without a hood, it is recommended to store only laboratory glass or instruments.
Working surface material: porcelain tile. It is moisture-resistant and perfectly withstands high temperatures. It is resistant to prolonged exposure to concentrated acids, alkalis and organic solvents. It has limited resistance to hydrofluoric acid. This is one of the most popular types of countertops for laboratory furniture.
A small sink-drain is made of polypropylene resistant to aggressive chemicals. Its diameter is 135 mm and its depth is 110 mm.
The working area is closed by two independent lifting frames with counterweights. As standard, there are two exhaust zones: the hood of the exhaust box and the level of the countertop. Diameter of the flange for connection to the ventilation system: 150 mm. A version with an additional hood from the lower cabinet is also available.
Working area size (W×D×H): 1768×540×750 mm. Please note that the cabinet narrows upwards. At a height of 50 cm, the depth of the working area will be 410 mm, at a height of 70 cm: 365 mm. If you need to place high equipment, then make sure that it corresponds to the dimensions of the camera, otherwise you will not be able to close the cabinet.
The height of the raised glass above the cabinet: 510 mm, that is, when the glass is raised, the height of the cabinet will be 2470 mm.
The NV-1800 SHVD-U fume cupboard is equipped with a fluorescent lamp with a switch and two sockets, one of them with grounding. Sockets have the IP20 degree of protection, the maximum load on them: 1.5 kW.
The basis of the working chamber is an all-welded metal frame in powder coating. Load-bearing laminated panels (chipboard with a thickness of 16 mm) are edged on the facade with a durable PVC edge with a thickness of 2 mm, which increases the impact resistance and mechanical strength of the products.
The cabinet legs are adjustable in height within two centimeters, allowing you to place the cabinet even on a rather uneven floor.
Exhaust cabinet LAB-1600 ballscrews
Working surface: Porcelain stoneware (ceramic tile 300*300mm)
Length, mm: 1632
Depth, mm: 925
Height, mm: 2100
equipment
Working box
the side and back panels are lined with a row of ceramic tiles to a height of 400mm
the case is melamine with a thickness of 16mm
lifting screen with the possibility of fixing at any height – organic acrylic glass with a thickness of 8mm, lifting 0–750mm, increases the height of the cabinet with a full lift by 430mm
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Exhaust cabinet for working with LVZH LAB-PRO SHVLVZH 120.74.230 KG
BASIC EQUIPMENT
Working box
the front guide posts are aluminum profile painted with powder paint (RAL 7035/RAL 5023), in the right rack there are a light switch and 2 splash–proof sockets with a 3.2kW cover (IP54)
the front anti-spill side is acid-resistant polished stainless steel. AISI 304 steel
rear, upper, side panels – metal painted with powder paint (RAL 7035) with the texture of shagreen leather
2 dependent lifting screens – tempered glass in aluminum frames, lifting 0-780mm, do not change the dimensions of the cabinet when lifting
the upper fixed screen – tempered glass in an aluminum frame
on the top panel:
4 anti-explosion the valve
lamp LED dust– and moisture-proof (2X10W IP65) is separated from the working space by tempered glass with a thickness of 4mm
flange d=250mm (the distance from the back panel to the center of the flange is 170mm)
switching box with automatic emergency power off 16A
easily removable exhaust visors
3 exhaust levels
on the rear panel:
4 holes d =22mm with plugs made of stainless steel for the installation of additional pipes or taps
technological hole d=50mm with a plastic plug
counterweights are placed in the front pillars-pylons and are easily serviced
Frame base
metal frame with a pedestal, painted with powder paint (RAL 7035) with a texture of shagreen leather:
double metal facades with a noise damper, opening angle 270°
handles – polypropylene
2 compartments with locks
1 shelf with the possibility of installation on three levels in any of the compartments
flange d=100mm
service panel – metal box painted with powder paint (RAL 5023) with the texture of shagreen leather:
adjustable supports
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Exhaust cabinet for working with LVZH LAB-PRO SHVLVZH 180.74.230 KG
BASIC EQUIPMENT
Working box
front guide posts – aluminum profile painted with powder paint (RAL 7035/RAL 5023), in the right rack there are a light switch and 2 splash–proof sockets with a 3.2kW cover (IP54)
the front anti-spill side is acid-resistant polished stainless steel. AISI 304 steel
rear, upper, side panels – metal painted with powder paint (RAL 7035) with the texture of shagreen leather
2 dependent lifting screens – tempered glass in aluminum frames, lifting 0-780mm, do not change the dimensions of the cabinet when lifting
the upper fixed screen – tempered glass in an aluminum frame
on the top panel:
4 anti-explosion the valve
lamp LED dust– and moisture-proof (2X10W IP65) is separated from the working space by tempered glass with a thickness of 4mm
flange d=250mm (the distance from the back panel to the center of the flange is 170mm)
switching box with automatic emergency power off 16A
easily removable exhaust visors
3 levels of exhaust
on the rear panel:
4 holes d =22mm with plugs made of stainless steel for installing additional pipes or taps
technological hole d=50mm with a plastic plug
counterweights are placed in the front pillars-pylons and are easily serviced
Frame base
metal frame with a pedestal, painted with powder paint (RAL 7035) with a texture of shagreen leather:
double metal facades with a noise damper, opening angle 270°
handles – polypropylene
4 compartments with locks
2 shelves with the possibility of installation on three levels in any of the compartments
2 flanges d=100mm
service panel – metal box painted with powder paint (RAL 5023) with the texture of shagreen leather:
adjustable supports
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Exhaust cabinet LAB-M SHV ME 90.74.210 KG
Furniture for laboratory work.
All-metal exhaust cabinet
Working surface: Porcelain stoneware (ceramic tile 300*300mm), stitching - epoxy compound
Overall dimensions:
Length, mm: 900
Depth, mm: 740
Height, mm: 2100
equipment
Working box
front anti–spill side - acid–resistant polished stainless steel AISI 316
housing - metal painted with white powder paint (RAL 9016)
guide posts – aluminum profile painted with dark gray powder paint (RAL 7011)
2 dependent lifting screens – tempered glass in aluminum frames, lifting 0-710mm, do not change the dimensions of the cabinet when lifting.
LOIP
Saint Petersburg
Produced in: Saint Petersburg
General purpose exhaust cabinet LAB-PRO SHV 120.84.230 KG
BASIC EQUIPMENT
Working box
guide racks – aluminum profile painted with powder paint (RAL 7035/RAL 5023)in the right rack there are a light switch and 2 splash–proof sockets with a 3.2kW cover (IP54)
the front anti-spill side is acid-resistant polished stainless steel AISI 304
side panels – tempered glass
2 dependent lifting screens – tempered glass in aluminum frames, lifting 0-780mm, do not change the dimensions of the cabinet when lifting
the upper fixed screen – metal painted with powder paint (RAL 5023) with the texture of shagreen leather
back and top panels –
polypropylene LED lamp dust- and moisture-proof (10W IP65)
switching box with automatic emergency power off 16A
flange d=250mm (the distance from the rear panel to the center of the flange is 170mm)
easily removable exhaust visors
3 exhaust levels (lower, side and front)
counterweights are placed in the front pylon racks and are easily serviced
Frame base
collapsible frame made of rectangular metal profile painted with powder paint (RAL 7035) with the texture of shagreen leather
service panel – metal box painted with powder paint (RAL 5023) with the texture of shagreen leather:
adjustable supports
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Exhaust cabinet for working with LVZH LAB-PRO SHVLVZH-TV 120.75.245 KG
BASIC EQUIPMENT
Working box
countertop, working surface – ceramic tile, resistant to concentrated acids, alkalis, organic solvents and high temperatures,color gray
front guide posts – aluminum profile painted with powder paint (RAL 7035/RAL 5023)
front anti–spill side - acid-resistant polished stainless steel. AISI 304 steel
rear, upper, side panels – metal painted with powder paint (RAL 7035) with the texture of shagreen leather
1 lifting screen – tempered glass in aluminum frames, lifting 0-670 mm, does not change the dimensions of the cabinet when lifting
the middle fixed screen – tempered glass in an aluminum frame
upper fixed screen – metal painted with powder paint (RAL 7035)
on the upper panel:
4 anti-explosion valves
LED dust- and moisture-proof lamp (2x10W IP65) is separated from the workspace tempered glass
flange Ø 250 mm (the distance from the back panel to the center of the flange is 170 mm)
3 exhaust levels
on the back panel:
4 holes Ø 22 mm with plugs made of stainless steel for installing additional pipes or taps
technological hole Ø 50 mm with a plug made of HPL plastic
counterweight is placed in the left pillar and easy to maintain
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Exhaust cabinet for washing dishes LAB-PRO SHVM 120.74.230 TR
BASIC EQUIPMENT
Working box
guide posts – aluminum profile painted with powder paint (RAL 7035/RAL 5023) in the right rack there is a light switch
front anti–spill side - acid-resistant polished stainless steel AISI 304
side panels – tempered glass
2 dependent lifting screens – tempered glass in aluminum frames, lifting 0-780mm, do not change the dimensions of the cabinet when lifting
the upper fixed screen – metal painted with powder paint (RAL 5023) with the texture of shagreen leather
back and top panels – polypropylene
on the top panel:
LED lamp dust- and moisture-proof 10W IP65
switching box with automatic emergency shutdown power supply 16A
flange d=250mm (the distance from the back panel to the center of the flange is 170mm)
easily removable exhaust canopies
3 exhaust levels (lower, side and front)
counterweights are placed in the front pylon racks and are easy to maintain
Frame base
metal pedestal painted with powder paint (RAL 7035) with the texture of shagreen leather
facades – laminated MDF with a thickness of 16mm
handles – polypropylene
2 compartments with locks
1 shelf with the possibility of installation on three levels in any of the compartments (when the cabinet is equipped with 2 bowls, shelves are not included)
flange d=100mm
service panel – aluminum profile painted with powder paint (RAL 5023) with the texture of shagreen leather:
adjustable supports
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Exhaust cabinet LAB-M SHV ME 150.74.210 KG
Furniture for laboratory work.
All-metal exhaust cabinet
Working surface: Porcelain stoneware (ceramic tile 300*300mm), stitching - epoxy compound
Overall dimensions:
Length, mm: 1500
Depth, mm: 740
Height, mm: 2100
equipment
Working box
front anti–spill side – acid–resistant polished stainless steel AISI 316
body - metal, powder–coated white (RAL 9016)
guide posts - aluminum profile, powder-coated dark gray (RAL 7011)
2 dependent lifting screens - tempered glass in aluminum frames, lifting 0-710mm, do not change the dimensions of the cabinet when lifting.
LOIP
Saint Petersburg
Produced in: Saint Petersburg
NV-1500 SHVD-U Two-frame fume cupboard with plumbing and countertop made of granite tiles
from
58 691 ₽
The Kors NV-1500 SHVD-U laboratory fume cupboard is a two—frame cabinet with a granite countertop with a width of 1410 mm and a small built-in sink made of polypropylene.
External dimensions of the cabinet (W×D×H): 1410×700×1960 mm.
Dimensions of the working area (W×D×H): 1378×540×750 mm.
Table top: granite tiles.
Working surface material: porcelain tile. It is moisture-resistant and perfectly withstands high temperatures. It is resistant to prolonged exposure to concentrated acids, alkalis and organic solvents. Limited resistance to hydrofluoric acid. This is one of the most popular types of countertops for laboratory furniture.
The small sink-drain is made of polypropylene, resistant to aggressive chemicals. Its diameter is 135 mm and its depth is 110 mm.
The working area is closed by two lifting frames with a counterweight. As standard, there are two exhaust zones: the hood of the exhaust box and the level of the countertop. Diameter of the flange for connection to the ventilation system: 150 mm.
Working area size (W×D×H): 1378×540×750 mm. Please note that the cabinet narrows upwards. At a height of 50 cm, the depth of the working area will be 410 mm, at a height of 70 cm: 365 mm. If you need to place high equipment, then make sure that it corresponds to the dimensions of the camera, otherwise you will not be able to close the cabinet.
The height of the raised glass above the cabinet: 510 mm, that is, when the glass is raised, the height of the cabinet will be 2470 mm.
The NV-1500 SHVD-U fume cupboard is equipped with an LED lamp with a switch and two sockets, one of them with grounding. Sockets have the IP20 degree of protection, the maximum load on them: 1.5 kW.
The working chamber is an all-welded metal frame in powder coating. Load-bearing laminated panels (chipboard with a thickness of 16 mm) are edged on the facade with a durable PVC edge with a thickness of 2 mm, which increases the impact resistance and mechanical strength of the products.
The cabinet legs are adjustable in height within two centimeters, allowing you to place the cabinet even on a rather uneven floor.
NV LAB
Moscow
Produced in: Moscow, Moscow region
Exhaust cabinet for washing dishes LAB-PRO SHVM 150.74.230 PP
BASIC EQUIPMENT
Working box
guide posts – aluminum profile painted with powder paint (RAL 7035/RAL 5023) in the right rack there is a light switch
front anti–spill side - acid-resistant polished stainless steel AISI 304
side panels – tempered glass
2 dependent lifting screens – tempered glass in aluminum frames, lifting 0-780mm, do not change the dimensions of the cabinet when lifting
the upper fixed screen – metal painted with powder paint (RAL 5023) with the texture of shagreen leather
back and top panels – polypropylene
on the top panel:
LED lamp dust- and moisture-proof 22W IP65
switching box with automatic emergency shutdown power supply 16A
flange d=250mm (the distance from the back panel to the center of the flange is 170mm)
easily removable exhaust canopies
3 exhaust levels (lower, side and front)
counterweights are placed in the front pylon racks and are easily serviced
Frame base
metal pedestal painted with powder paint (RAL 7035) with the texture of shagreen leather
facades – laminated MDF with a thickness of 16mm
handles – polypropylene
2 compartments with locks
1 shelf with the possibility of installation on three levels in any of the compartments (when the cabinet is equipped with 2 bowls, shelves are not included)
flange d=100mm
service panel – aluminum profile painted with powder paint (RAL 5023) with the texture of shagreen leather:
adjustable supports
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Exhaust cabinet LAB-M SHV ME 180.74.210 F20
Furniture for laboratory work.
All-metal exhaust cabinet
Working surface: FRIDURIT (20 mm)
Overall dimensions:
Length, mm: 1800
Depth, mm: 740
Height, mm: 2100
equipment
Working box
anti–spill side – acid–resistant polished stainless steel AISI 316
housing - metal painted with white powder paint (RAL 9016)
guide posts – aluminum profile painted with dark gray powder paint (RAL 7011)
2 dependent lifting screens - tempered glass in aluminum frames, lifting 0-710mm, not change the dimensions of the cabinet when lifting.
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Exhaust cabinet LAB-800 ballscrews
Working surface: Porcelain stoneware (ceramic tile 300*300mm)
Length, mm: 832
Depth, mm: 925
Height, mm: 2100
equipment
Working box
the side and back panels are lined with a row of ceramic tiles to a height of 400mm
the case is melamine with a thickness of 16mm
lifting screen with the possibility of fixing at any height – organic acrylic glass with a thickness of 8mm, lifting 0–750mm, increases the height of the cabinet with a full lift by 430mm
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Exhaust cabinet for organic synthesis LAB-PRO SHVOS 150.84.230 TR
BASIC EQUIPMENT
Working box
the front guide posts are aluminum profile painted with powder paint (RAL 7035/RAL 5023), in the right rack there are a light switch and 2 splash–proof sockets with a 3.2kW cover (IP54)
the front anti–spill side is acid-resistant polished stainless steel. AISI 304 steel
rear, upper, side panels – metal painted with powder paint (RAL 7035) with the texture of shagreen leather
the inner surfaces of the working box are lined with chemically resistant HPL plastic
2 dependent lifting screens – tempered glass in aluminum frames, lifting 0-780mm, do not change the dimensions of the cabinet when lifting
the upper fixed screen – tempered glass in an aluminum frame
on the upper panel:
LED dust- and moisture-proof lamp (2X10W IP65) is separated from the workspace by tempered glass thickness of 4mm
flange d=250mm (distance from the rear panel to flange center – 170mm)
easily removable exhaust canopies
3 exhaust levels
on the left side panel service module with cold water supply pipe and wall-mounted drain sink made of polypropylene
cold water supply valve in the left rack of the box
counterweights are placed in the front racks-pylons and are easily serviced
Frame base
collapsible frame made of rectangular metal profile painted with powder paint (RAL 7035) with the texture of shagreen leather
service panel - aluminum profile painted with powder paint (RAL 7035/RAL 5023) with the texture of shagreen leather
adjustable supports
module with two drawers
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Exhaust cabinet for working with acids LAB-PRO SHVK 150.84.230 VI
BASIC EQUIPMENT:
Working box
front guide posts – aluminum profile painted with powder paint (RAL 7035/RAL 5023), in the right rack there are a light switch and 2 splash–proof sockets with a 3.2kW cover (IP54)
the front anti-spill side is acid-resistant polished stainless steel. AISI 316 steel
rear, upper, side panels – metal painted with powder paint (RAL 7035) with the texture of shagreen leather
inner capsule made of polypropylene lined with ceramic plates of the rear and side panels to a height of 380mm
2 dependent lifting screens – tempered glass in aluminum frames, lifting 0-780mm, do not change the dimensions of the cabinet when lifting
the upper fixed screen – polypropylene
on the top panel:
LED dust– and moisture-proof lamp 2x22 W (IP65) is separated from the workspace by tempered glass with a thickness of 4mm
flange d=250mm (distance from the back panel to the center of the flange - 170mm)
switching box with automatic emergency power off 16A
3 exhaust levels
easily removable exhaust visors
counterweights are placed in the front pylon racks and are easily serviced
Frame base
collapsible frame made of rectangular metal profile painted with powder paint (RAL 7035) with the texture of shagreen leather
service panel - aluminum profile painted with powder paint (RAL 5023) with the texture of shagreen leather
adjustable supports
LOIP
Saint Petersburg
Produced in: Saint Petersburg
FUME HOOD FOR MUFFLE FURNACES
from
72 550 ₽
The SHVM fume hood is designed for the installation of muffle furnaces and drying cabinets. It can be equipped with cabinets made of steel.
1. LC-900 SHVM
Width - 960
GRANTEC - 72 550 ₽
2. LC-900 SHVM with protective screen
Width - 960
GRANTEC - 88 910 ₽
3. LC-1200 SHVM
Width - 1260
GRANTEC - 83 860 ₽
4. LC-1200 SHVM with protective screen
Width - 1260
GRANTEC - 100 390 ₽
5. LC-1500 SHVM
Width - 1560
GRANTEC - 95 270 ₽
6. LC-1500 SHVM with protective screen
Width - 1560
GRANTEC - 107 690 ₽
SpetsBaltMebel
г. Санкт- Петербург
Produced in: Saint Petersburg
General purpose exhaust cabinet LAB-PRO SHV 120.74.230 SS
BASIC EQUIPMENT
Working box
guide racks – aluminum profile painted with powder paint (RAL 7035/RAL 5023)in the right rack there are a light switch and 2 splash–proof sockets with a 3.2kW cover (IP54)
the front anti-spill side is acid-resistant polished stainless steel AISI 304
side panels – tempered glass
2 dependent lifting screens – tempered glass in aluminum frames, lifting 0-780mm, do not change the dimensions of the cabinet when lifting
the upper fixed screen – metal painted with powder paint (RAL 5023) with the texture of shagreen leather
on the top panel:
LED lamp dust- and moisture-proof (10W IP65)
switching box with automatic emergency power off 16A
flange d=250mm (the distance from the back panel to the center of the flange is 170mm)
easily removable exhaust canopies
3 levels of exhaust (lower, side and front)
counterweights are placed in the front pylon racks and are easily serviced
by the rear and upper panels – polypropylene
Frame base
collapsible frame made of rectangular metal profile painted with powder paint (RAL 7035) with the texture of shagreen leather
service panel - metal box painted with powder paint (RAL 5023) with the texture of shagreen leather:
adjustable supports
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Exhaust cabinet LAB-1500 SHV-N
Working surface: Porcelain stoneware (ceramic tile 300*300mm)
Length, mm: 1538
Depth, mm: 726
Height, mm: 2100
equipment
Working box
front anti–spill side - TRESPA TopLab
sink-drain (polypropylene, internal size 250*100*150mm), pipe for water
the package includes
a corrugated siphon
2 flexible eyeliners with a length of 1200mm
housing – melamine with a thickness of 16mm
lifting screen with the possibility of fixing at any height – tempered glass with a thickness of 5mm, lifting 0-700mm, increase the height of the cabinet at full lifting by 450mm
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Exhaust cabinet LAB-1600 ballscrews
Working surface: Porcelain stoneware (ceramic tile 300*300mm)
Length, mm: 1632
Depth, mm: 925
Height, mm: 2100
equipment
Working box
the side and back panels are lined with a row of ceramic tiles to a height of 400mm
the case is melamine with a thickness of 16mm
lifting screen with the possibility of fixing at any height – organic acrylic glass with a thickness of 8mm, lifting 0–750mm, increases the height of the cabinet with a full lift by 430mm
LOIP
Saint Petersburg
Produced in: Saint Petersburg
COMBINED WEIGHING TABLE MODELS: LK-1200 SV, LK-1500 SV
from
47 230 ₽
1.LK-1200 S
Width - 1200
Seamless granite / CPL - 47 230 ₽
Seamless granite / LAB HPL- 59 950 ₽
2.LK-1500 SV
Width - 1500
Seamless granite / CPL - 59 950 ₽ Seamless granite / LAB HPL - 66 890 ₽
SpetsBaltMebel
г. Санкт- Петербург
Produced in: Saint Petersburg
Table-sink LAB-1200 MOP
COMPLETE
SET table top – a single module made of polypropylene
Attention! It is not recommended to use the inner size of the bowl for work with oil and petroleum products (fuel oil, bitumen, etc.)
– 400*500* 290mm
cabinet body – melamine 16mm thick
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Island table low LAB-PRO SOCN 120.150.75 TR
One-piece table top: TRESPA TopLabPlus 16 mm
Length, mm: 1200
Depth, mm: 1500
Height, mm: 750
BASIC EQUIPMENT
The base is a collapsible metal frame made of rectangular steel profile, painted with powder paint (RAL 7035) with the texture of shagreen leather
Four easily removable screens (RAL 7035) and two non-removable (RAL 5023)
Hidden fasteners
Adjustable supports (0-40 mm)
A set of end boxes-plugs
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Metal double support cabinet with 2 doors LAB-PRO TOMDD 116.50.86
Metal double support cabinet with 2 doors
Length, mm: 1160
Depth, mm: 500
Height, mm: 860
Completely made of powder-coated steel (RAL 7035) with the texture of shagreen leather
Frameless housing design
Two compartments with a hinged door each
The side walls, partition and facades are double. The thickness of the side walls is 19 mm, the facades are 18 mm
The facades are filled with noise-absorbing material, equipped with a lock
Hinges with an opening angle of 270o
Handles - polypropylene
In each compartment there is an easily removable shelf with the possibility of installation at 3 different height levels. The shelf has a lock
The permissible load on the shelf is 30 kg
Hidden adjustable supports (0 - 40 mm). The adjustment of the supports is carried out from inside the pedestal through the base
of 8 standard versions of the working surfaces of LAB-PRO RP
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Metal double support cabinet with 6 drawers LAB-PRO VOLUME 146.50.86
Metal double support cabinet with 6 drawers
Length, mm: 1460
Depth, mm: 500
Height, mm: 860
Completely made of powder-coated steel (RAL 7035) with the texture of shagreen leather
Frameless housing design
Two compartments: left - with 3 drawers, right - with 3 drawers
The side walls, partition and facades are double. The thickness of the side walls is 19 mm, the facades are 18 mm
The facades are filled with noise-absorbing material
Handles - polypropylene
Locks in the upper drawers
Telescopic guides of full extension
Internal drawer size: upper and middle drawers 650*410*85 mm, lower – 650*410*295 mm
The permissible load per box is 30 kg.
Hidden adjustable supports (0 - 40 mm). The adjustment of the supports is carried out from the inside of the pedestal through the base
of 8 standard versions of the working surfaces of LAB-PRO RP
LOIP
Saint Petersburg
Produced in: Saint Petersburg
DECO ESD ANTISTATIC STOOL
from
13 150 ₽
Suitable for comfortable seating at tables from 750 to 900 mm high. It is possible to replace the standard gas lift with a high one, which will allow changing the height adjustment range of the chair from 570 to 820 mm and using such a stool to work at tables above 900 mm. The permissible load on the product should not exceed 120 kg. The seat diameter is 340 mm.
SpetsBaltMebel
г. Санкт- Петербург
Produced in: Saint Petersburg
Hinged cabinet LAB-M NSHS-1 80.35.70
Furniture for laboratory work.
Mounted storage cabinet
Length, mm: 800
Depth, mm: 350
Height, mm: 700
PACKAGE
CONTENTS the case is white melamine with a thickness of 16 mm, the ABS edge is dark gray
two compartments. The left compartment with a hinged door, the right one is open
the facade of the left compartment is tinted light gray glass
in the right compartment there is 1 built–in shelf, in the left compartment there is 1 easily removable shelf with the possibility of rearrangement at 5 levels in height
the permissible load on the shelf is 20 kg.
LOIP
Saint Petersburg
Produced in: Saint Petersburg
NV-800 STP Mobile tables for devices (730×700×750)
from
8 374 ₽
NV-800 STP is a mobile table on wheels designed to move heavy equipment around the laboratory.
Dimensions of the table assembled (W×D ×H): 730×700×750 mm.
It is available with two variants of working surfaces
Table Model: Tabletop
NV-800 STP: Laminate. It is relatively moisture-resistant, resistant to short-term effects of acids, alkalis and organic solvents. This countertop does not tolerate strong heating or prolonged exposure to solvents, concentrated acids and alkalis.
NV-800 STP: Chemically resistant plastic. It is a good choice for training workshops, analytical and medical laboratories. It does not tolerate high temperatures well, heating devices should not be placed on the surface.
NV-800 STP has a metal frame painted with durable powder paint. The side laminated panels (chipboard 16 mm thick) and the lower shelf are edged on the facade with a 2 mm PVC edge, which increases their impact resistance and mechanical strength.
The table wheels allow you to conveniently move the equipment around the laboratory. On the bottom shelf you can store equipment accessories or the necessary small stuff.
Advantages of NV-800 STP tables
Designed to accommodate dimensional equipment;
An inexpensive solution for laboratories that value the reliability and durability of furniture;
Suitable for the small rooms.
Application of NV-800 STP tables
Tables of the NV series are used in laboratories of the widest profile: at food and light industry enterprises, in scientific and educational workshops, in chemistry classrooms, quality control centers, medical organizations and many others.
NV LAB
Moscow
Produced in: Moscow, Moscow region
Cupboard for dishes LAB-800 SHP
Furniture for laboratory work.
Length, mm: 800
Depth, mm: 580
Height, mm: 1810
body – melamine 16 mm thick
doors – tinted glass
2 compartments 800mm high
upper compartment with lock
5 shelves (3 built-in, the distance between the shelves is 256mm, 2 removable)
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Washing table LAB-M MO 150.65.90 T6V
Furniture for laboratory work.
Table-washing LAB-M MO 150.65.90 T6V
Width, mm: 1500
Depth, mm: 650
Height, mm: 900
equipment:
Countertop – TRESPA TopLabPlus is a monolithic slab of ultra-high pressing with a thickness of 6mm with a chemically resistant surface made of polyurethane-acrylic composition, on a substrate made of wood–containing material (plywood 15mm or melamine 16mm), edged along the perimeter with PVC edge 2mm
1 built-in bowl - epoxy compound VITE. The location of the bowl in the center, fixing the bowl flush with the table top level.
Inner bowl size – 450*365*280 mm
The base of the sink table is a support pedestal made of white melamine
Facades – laminated MDF of white color with a thickness of 16 mm, dark gray ABS edging
Without shelves
LOIP
Saint Petersburg
Produced in: Saint Petersburg
NV-800 SPr Cabinet for devices (with 2 glass doors)
from
17 202 ₽
The NV-800 SPr cabinet for devices with 2 glass doors.
The cabinet is made of laminated chipboard with a 2 mm shockproof PVC edge on the facade.
Included in the set:
2 glass doors for the upper compartment;
2 doors for the lower compartment;
4 shelf inserts;
metal legs 100 mm high.
NV LAB
Moscow
Produced in: Moscow, Moscow region
Laboratory washing table CM-180.64.90
A table with an overall height of 900 mm with a countertop measuring 1800 × 640 mm made of porcelain stoneware, monolithic ceramics or stainless steel.
It designed for long-term operation, the power frame does not contain aluminum and plastic parts in the fasteners.
Overall dimensions without superstructure 1800x640x900 mm
Termeks
Tomsk
Produced in: Tomsk
Island table low LAB-PRO SOCN 180.150.75 SS
Island table
Combined working surface: STEEL main table top (single stainless steel module with anti-spill side) with a depth of 650 mm / auxiliary table top made of TRESPA material with a depth of 200 mm / STEEL main table top with a depth of 650 mm
Length, mm: 1800
Depth, mm: 1500
Height, mm: 750
BASIC EQUIPMENT
The base is a collapsible metal frame made of rectangular steel profile, painted with powder paint (RAL 7035) with the texture of shagreen leather
Four easily removable screens (RAL 7035) and two non-removable (RAL 5023)
Hidden fasteners
Adjustable supports (0-40 mm)
A set of end boxes-plugs
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Exhaust cabinet for working with LVZH LAB-PRO SHVLVZH 180.74.230 KG
BASIC EQUIPMENT
Working box
front guide posts – aluminum profile painted with powder paint (RAL 7035/RAL 5023), in the right rack there are a light switch and 2 splash–proof sockets with a 3.2kW cover (IP54)
the front anti-spill side is acid-resistant polished stainless steel. AISI 304 steel
rear, upper, side panels – metal painted with powder paint (RAL 7035) with the texture of shagreen leather
2 dependent lifting screens – tempered glass in aluminum frames, lifting 0-780mm, do not change the dimensions of the cabinet when lifting
the upper fixed screen – tempered glass in an aluminum frame
on the top panel:
4 anti-explosion the valve
lamp LED dust– and moisture-proof (2X10W IP65) is separated from the working space by tempered glass with a thickness of 4mm
flange d=250mm (the distance from the back panel to the center of the flange is 170mm)
switching box with automatic emergency power off 16A
easily removable exhaust visors
3 levels of exhaust
on the rear panel:
4 holes d =22mm with plugs made of stainless steel for installing additional pipes or taps
technological hole d=50mm with a plastic plug
counterweights are placed in the front pillars-pylons and are easily serviced
Frame base
metal frame with a pedestal, painted with powder paint (RAL 7035) with a texture of shagreen leather:
double metal facades with a noise damper, opening angle 270°
handles – polypropylene
4 compartments with locks
2 shelves with the possibility of installation on three levels in any of the compartments
2 flanges d=100mm
service panel – metal box painted with powder paint (RAL 5023) with the texture of shagreen leather:
adjustable supports
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Table-sink LAB-M MO ME 150.65.90 T6V
Furniture for laboratory work.
Washing table on a metal support stand LAB-M MO ME 150.65.90 T6V
Width, mm: 1500
Depth, mm: 650
Height, mm: 900
Equipment:
Table top – TRESPA TopLabPlus - a monolithic slab of ultra-high pressing thickness of 6 mm with a chemically resistant surface made of polyurethane–acrylic composition, the lining material is moisture-resistant plywood 15 mm thick; the table top is edged with a dark gray plastic edge
1 built–in bowl - epoxy compound VITE. The location of the bowl in the center, the mounting of the bowl is flush with the level of the countertop.
Inner bowl size – 450*365*280 mm
The base of the sink table is a metal support pedestal. All-welded frame painted with dark grey powder paint RAL 7011. The bottom and top of the housing are sheet steel painted with powder paint of dark gray RAL 7011, the side walls are made of sheet steel painted with powder paint of white RAL 9016.
Facades – laminated MDF of white color with a thickness of 16 mm, dark gray ABS edging
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Exhaust cabinet LAB-M SHV ME 90.74.210 KG
Furniture for laboratory work.
All-metal exhaust cabinet
Working surface: Porcelain stoneware (ceramic tile 300*300mm), stitching - epoxy compound
Overall dimensions:
Length, mm: 900
Depth, mm: 740
Height, mm: 2100
equipment
Working box
front anti–spill side - acid–resistant polished stainless steel AISI 316
housing - metal painted with white powder paint (RAL 9016)
guide posts – aluminum profile painted with dark gray powder paint (RAL 7011)
2 dependent lifting screens – tempered glass in aluminum frames, lifting 0-710mm, do not change the dimensions of the cabinet when lifting.
LOIP
Saint Petersburg
Produced in: Saint Petersburg