Catalog
Back to search results
NV-1250 SHV-BC Fume cupboard with countertop made of monolithic ceramics
Back to search results
NV-1250 SHV-BC Fume cupboard with countertop made of monolithic ceramics
from
46 412 ₽
Manufacturer:
NV LAB
Location:
Moscow
from
46 412 ₽
Go to the manufacturer's website
THe Kors NV-1250 SHV-BC laboratory fume cupboard is a single—frame cabinet with a width of 1240 mm and with a table top made of monolithic ceramics.
External dimensions of the cabinet (W×D×H): 1240×700×1960 mm.
Dimensions of the working area (W×D×H): 1208×660×1072 mm.
Table top: monolithic ceramic.
Convenient fume cupboard for comfortable work in the laboratory
The table top made of monolithic ceramics is moisture-resistant, perfectly withstands high temperatures. Due to the lack of seams, ceramic granite tiles are better resistant to chemicals and heat. It is possible to place high-temperature equipment on it.
The working area is closed by a single lifting frame with a counterweight. There are two exhaust zones in it: the hood of the exhaust box and the level of the countertop. Diameter of the flange for connection to the ventilation system: 150 mm.
Working area size (W×D×H): 1208×540×750 mm. Please note that the cabinet narrows upwards. At a height of 50 cm, the depth of the working area will be 410 mm, at a height of 70 cm it will be 365 mm. If you need to place high equipment, then make sure that it corresponds to the dimensions of the camera, otherwise you will not be able to close the cabinet.
The height of the raised glass above the cabinet: 510 mm, that is, when the glass is raised, the height of the cabinet will be 2470 mm.
The working area is illuminated by a fluorescent lamp (included in the package). The switch is located on the right side of the cabinet, next to the sockets.
The fume cupboard is equipped with two sockets, one of them with grounding. Sockets have the IP20 degree of protection, maximum load: 1.5 kW.
The base of the cabinet is an all-welded metal frame in powder coating. The side laminated panels (chipboard 16 mm thick) are edged on the facade with a durable PVC edge 2 mm thick, which increases their impact resistance and mechanical strength.
The cabinet legs are adjustable in height within two centimeters, allowing you to place the cabinet even on a rather uneven floor.
And if we need a cabinet for muffle furnaces?
If you need a cabinet to accommodate high-temperature equipment, you might be interested in the ballscrew models. The depth of the countertop is specially increased so that you can put an oven or a cabinet.
External dimensions of the cabinet (W×D×H): 1240×700×1960 mm.
Dimensions of the working area (W×D×H): 1208×660×1072 mm.
Table top: monolithic ceramic.
Convenient fume cupboard for comfortable work in the laboratory
The table top made of monolithic ceramics is moisture-resistant, perfectly withstands high temperatures. Due to the lack of seams, ceramic granite tiles are better resistant to chemicals and heat. It is possible to place high-temperature equipment on it.
The working area is closed by a single lifting frame with a counterweight. There are two exhaust zones in it: the hood of the exhaust box and the level of the countertop. Diameter of the flange for connection to the ventilation system: 150 mm.
Working area size (W×D×H): 1208×540×750 mm. Please note that the cabinet narrows upwards. At a height of 50 cm, the depth of the working area will be 410 mm, at a height of 70 cm it will be 365 mm. If you need to place high equipment, then make sure that it corresponds to the dimensions of the camera, otherwise you will not be able to close the cabinet.
The height of the raised glass above the cabinet: 510 mm, that is, when the glass is raised, the height of the cabinet will be 2470 mm.
The working area is illuminated by a fluorescent lamp (included in the package). The switch is located on the right side of the cabinet, next to the sockets.
The fume cupboard is equipped with two sockets, one of them with grounding. Sockets have the IP20 degree of protection, maximum load: 1.5 kW.
The base of the cabinet is an all-welded metal frame in powder coating. The side laminated panels (chipboard 16 mm thick) are edged on the facade with a durable PVC edge 2 mm thick, which increases their impact resistance and mechanical strength.
The cabinet legs are adjustable in height within two centimeters, allowing you to place the cabinet even on a rather uneven floor.
And if we need a cabinet for muffle furnaces?
If you need a cabinet to accommodate high-temperature equipment, you might be interested in the ballscrew models. The depth of the countertop is specially increased so that you can put an oven or a cabinet.
NV-1500 SHV-B-NERZH Fume cupboard with stainless steel countertop
from
81 338 ₽
The Korsa NV-1500 SHV-NERZH Laboratory fume cupboards are single—frame cabinets with a width of 1410 mm with a stainless steel countertop.
External dimensions of the cabinet (W×D×H): 1410×700×1960 mm.
Dimensions of the working area (W×D×H): 1378×540×750 mm.
Table top: stainless steel.
Convenient fume cupboards for comfortable work in the laboratory
Working surface material: stainless steel. It is well suited for biological or medical laboratories, but it is not recommended for use in chemical laboratories. It is resistant to prolonged exposure to temperature, organic solvents, and oils. It has limited resistance to short-term exposure to concentrated mineral acids and alkalis and is destroyed by prolonged exposure to concentrated acids.
The working area is closed by a single lifting frame with a counterweight. It has two exhaust zones: the hood of the exhaust box and the level of the countertop. Diameter of the flange for connection to the ventilation system: 150 mm.
Working area size (W×D×H): 1378×540×750 mm. Please note that the cabinet narrows upwards. At a height of 50 cm, the depth of the working area will be 410 mm, at a height of 70 cm: 365 mm. If you need to place high equipment, then make sure that it corresponds to the dimensions of the camera, otherwise you will not be able to close the cabinet.
The height of the raised glass above the cabinet: 510 mm, that is, with the glass raised, the total height of the cabinet will be 2470 mm.
The working area is illuminated by an LED lamp (included in the package). The switch is located on the right-hand side of the cabinet, next to the sockets.
The fume cupboard is equipped with two sockets, one of them with grounding. Sockets have the IP20 degree of protection, maximum load: 1.5 kW.
The base of the cabinet is an all-welded metal frame in powder coating. The side laminated panels (chipboard with a thickness of 16 mm) are edged with a durable PVC edge with a thickness of 2 mm, which increases their impact resistance and mechanical strength.
The cabinet legs are adjustable in height within two centimeters, allowing you to place the cabinet even on a rather uneven floor.
NV LAB
Moscow
Produced in: Moscow, Moscow region
NV-1500 SHV-PB Fume cupboard with table top made of polypropylene
from
60 312 ₽
The Korsa NV-1500 SHV-PB laboratory fume cupboard is a single—frame cabinet with a width of 1410 mm with a table top made of polypropylene.
External dimensions of the cabinet (W×D×H): 1410×700×1960 mm.
Dimensions of the working area (W×D×H): 1378×540×750 mm.
Table top: polypropylene.
A reliable fume cupboard for laboratories
Working surface material: monolithic polypropylene. It is moisture-resistant, resistant to prolonged exposure to concentrated acids, alkalis and organic solvents. Poorly resistant to high temperatures. Polypropylene countertops are suitable for chemical laboratories that work a lot with concentrated inorganic acids and alkalis.
The working area is closed by a single lifting frame with a counterweight. It has two exhaust zones: the hood of the exhaust box and the level of the countertop. Diameter of the flange for connection to the ventilation system: 150 mm.
Working area size (W×D×H): 1378×540×750 mm. Please note that the cabinet narrows upwards. At a height of 50 cm, the depth of the working area will be 410 mm, at a height of 70 cm: 365 mm. If you need to place high equipment, then make sure that it corresponds to the dimensions of the camera, otherwise you will not be able to close the cabinet.
The height of the raised glass above the cabinet: 510 mm, that is, with the glass raised, the total height of the cabinet will be 2470 mm.
The working area is illuminated by an LED lamp (included in the package). The switch is located on the right-hand side of the cabinet, next to the sockets.
The fume cupboard is equipped with two sockets, one of them with grounding. Sockets have the IP20 degree of protection, maximum load: 1.5 kW.
The base of the cabinet is an all-welded metal frame in powder coating. The side laminated panels (chipboard 16 mm thick) are edged on the facade with a durable PVC edge 2 mm thick, which increases their impact resistance and mechanical strength.
The cabinet legs are adjustable in height within two centimeters, allowing you to place the cabinet even on a rather uneven floor.
NV LAB
Moscow
Produced in: Moscow, Moscow region
Exhaust cabinet LAB-M SHV ME 150.74.210 KG
Furniture for laboratory work.
All-metal exhaust cabinet
Working surface: Porcelain stoneware (ceramic tile 300*300mm), stitching - epoxy compound
Overall dimensions:
Length, mm: 1500
Depth, mm: 740
Height, mm: 2100
equipment
Working box
front anti–spill side – acid–resistant polished stainless steel AISI 316
body - metal, powder–coated white (RAL 9016)
guide posts - aluminum profile, powder-coated dark gray (RAL 7011)
2 dependent lifting screens - tempered glass in aluminum frames, lifting 0-710mm, do not change the dimensions of the cabinet when lifting.
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Exhaust cabinet LAB-M SHV ME 180.74.210 KG
Furniture for laboratory work.
All-metal exhaust cabinet
Working surface: Porcelain stoneware (ceramic tile 300*300mm), stitching - epoxy compound
Overall dimensions:
Length, mm: 1800
Depth, mm: 740
Height, mm: 2100
equipment
Working box
front anti–spill side - acid–resistant polished stainless steel AISI 316
housing - metal painted with white powder paint (RAL 9016)
guide posts – aluminum profile painted with dark gray powder paint (RAL 7011)
2 dependent lifting screens – tempered glass in aluminum frames, lifting 0-710mm, do not change the dimensions of the cabinet when lifting.
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Exhaust cabinet LAB-M SHV ME 120.74.210 KG
Furniture for laboratory work.
All-metal exhaust cabinet
Working surface: Porcelain stoneware (ceramic tile 300*300mm), stitching - epoxy compound
Overall dimensions:
Length, mm: 1200
Depth, mm: 740
Height, mm: 2100
equipment
Working box
front anti–spill side - acid–resistant polished stainless steel AISI 316
housing - metal painted with white powder paint (RAL 9016)
guide posts – aluminum profile painted with dark gray powder paint (RAL 7011)
2 dependent lifting screens – tempered glass in aluminum frames, lifting 0-710mm, do not change the dimensions of the cabinet when lifting.
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Exhaust cabinet LAB-M SHV 180.74.210 VI
Furniture for laboratory work.
Exhaust cabinet made of chipboard
Working surface: VITE 16mm
Overall dimensions:
Length, mm: 1800
Depth, mm: 740
Height, mm: 2100
equipment
Working box
front anti–spill side - acid–resistant polished stainless steel AISI 316
housing - white chipboard with a thickness of 16mm
guide posts – aluminum profile painted with powder paint dark gray (RAL 7011)
2 dependent lifting screens – tempered glass in aluminum frames, lifting 0-710mm, do not change the dimensions of the cabinet when lifting.
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Exhaust cabinet LAB-M SHV 120.74.210 VI
Furniture for laboratory work.
Exhaust cabinet made of chipboard
Working surface: VITE 16mm
Overall dimensions:
Length, mm: 1200
Depth, mm: 740
Height, mm: 2100
equipment
Working box
front anti–spill side - acid–resistant polished stainless steel AISI 316
housing - white chipboard with a thickness of 16mm
guide posts – aluminum profile painted with powder paint dark gray (RAL 7011)
2 dependent lifting screens – tempered glass in aluminum frames, lifting 0-710mm, do not change the dimensions of the cabinet when lifting.
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Exhaust cabinet LAB-M SHV 150.74.210 KG
Furniture for laboratory work.
Exhaust cabinet made of chipboard
Working surface: Porcelain stoneware (ceramic tile 300*300mm), stitching - epoxy compound
Overall dimensions:
Length, mm: 1500
Depth, mm: 740
Height, mm: 2100
equipment
Working box
front anti–spill side - acid–resistant polished stainless steel AISI 316
housing - white chipboard with a thickness of 16mm
guide posts – aluminum profile painted with powder paint dark gray (RAL 7011)
2 dependent lifting screens – tempered glass in aluminum frames, lifting 0-710mm, do not change the dimensions of the cabinet when lifting.
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Exhaust cabinet LAB-M SHV 120.74.210 F20
Furniture for laboratory work.
Exhaust cabinet made of chipboard
Working surface: FRIDURIT (20 mm)
Overall dimensions:
Length, mm: 1200
Depth, mm: 740
Height, mm: 2100
equipment
Working box
front anti–spill side - acid–resistant polished stainless steel AISI 316
housing - white chipboard with a thickness of 16mm
guide posts – aluminum profile painted with powder paint dark gray (RAL 7011)
2 dependent lifting screens – tempered glass in aluminum frames, lifting 0-710mm, do not change the dimensions of the cabinet when lifting.
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Exhaust cabinet LAB-M SHV 120.74.210 KG
Furniture for laboratory work.
Exhaust cabinet made of chipboard
Working surface: Porcelain stoneware (ceramic tile 300*300mm), stitching - epoxy compound
Overall dimensions:
Length, mm: 1200
Depth, mm: 740
Height, mm: 2100
equipment
Working box
front anti–spill side - acid–resistant polished stainless steel AISI 316
housing - white chipboard with a thickness of 16mm
guide posts – aluminum profile painted with powder paint dark gray (RAL 7011)
2 dependent lifting screens – tempered glass in aluminum frames, lifting 0-710mm, do not change the dimensions of the cabinet when lifting.
LOIP
Saint Petersburg
Produced in: Saint Petersburg
NV-1500 SHVD-U Two-frame fume cupboard with plumbing and countertop made of granite tiles
from
58 691 ₽
The Kors NV-1500 SHVD-U laboratory fume cupboard is a two—frame cabinet with a granite countertop with a width of 1410 mm and a small built-in sink made of polypropylene.
External dimensions of the cabinet (W×D×H): 1410×700×1960 mm.
Dimensions of the working area (W×D×H): 1378×540×750 mm.
Table top: granite tiles.
Working surface material: porcelain tile. It is moisture-resistant and perfectly withstands high temperatures. It is resistant to prolonged exposure to concentrated acids, alkalis and organic solvents. Limited resistance to hydrofluoric acid. This is one of the most popular types of countertops for laboratory furniture.
The small sink-drain is made of polypropylene, resistant to aggressive chemicals. Its diameter is 135 mm and its depth is 110 mm.
The working area is closed by two lifting frames with a counterweight. As standard, there are two exhaust zones: the hood of the exhaust box and the level of the countertop. Diameter of the flange for connection to the ventilation system: 150 mm.
Working area size (W×D×H): 1378×540×750 mm. Please note that the cabinet narrows upwards. At a height of 50 cm, the depth of the working area will be 410 mm, at a height of 70 cm: 365 mm. If you need to place high equipment, then make sure that it corresponds to the dimensions of the camera, otherwise you will not be able to close the cabinet.
The height of the raised glass above the cabinet: 510 mm, that is, when the glass is raised, the height of the cabinet will be 2470 mm.
The NV-1500 SHVD-U fume cupboard is equipped with an LED lamp with a switch and two sockets, one of them with grounding. Sockets have the IP20 degree of protection, the maximum load on them: 1.5 kW.
The working chamber is an all-welded metal frame in powder coating. Load-bearing laminated panels (chipboard with a thickness of 16 mm) are edged on the facade with a durable PVC edge with a thickness of 2 mm, which increases the impact resistance and mechanical strength of the products.
The cabinet legs are adjustable in height within two centimeters, allowing you to place the cabinet even on a rather uneven floor.
NV LAB
Moscow
Produced in: Moscow, Moscow region
Exhaust cabinet LAB-M SHV 90.74.210 F20
Furniture for laboratory work.
Exhaust cabinet made of chipboard
Working surface: FRIDURIT (20 mm)
Overall dimensions:
Length, mm: 900
Depth, mm: 740
Height, mm: 2100
equipment
Working box
front anti–spill side - acid–resistant polished stainless steel AISI 316
housing - white chipboard with a thickness of 16mm
guide posts – aluminum profile painted with powder paint dark gray (RAL 7011)
2 dependent lifting screens – tempered glass in aluminum frames, lifting 0-710mm, do not change the dimensions of the cabinet when lifting.
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Exhaust cabinet LAB-1500 SHVOT
Working surface: Porcelain stoneware (ceramic tile 300*300mm)
Length, mm: 1500
Depth, mm: 740
Height, mm: 2100
Working box
working space depth – 600mm
front anti–spill side - TRESPA TopLab
sink-drain (polypropylene, internal size 250*100*150mm), pipe for water
the package includes
a corrugated siphon
2 flexible eyeliners with a length of 1200mm
housing – metal painted with white powder paint
two dependent lifting screens with the possibility of fixing at any height – tempered glass with a thickness of 5mm in aluminum frames, lifting 0-700mm, do not change the dimensions of the cabinet when lifting
the upper fixed screen – metal painted with white powder paint
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Exhaust cabinet LAB-M SHV 90.74.210 KG
Furniture for laboratory work.
Exhaust cabinet made of chipboard
Working surface: Porcelain stoneware (ceramic tile 300*300mm), stitching - epoxy compound
Overall dimensions:
Length, mm: 900
Depth, mm: 740
Height, mm: 2100
equipment
Working box
front anti–spill side - acid–resistant polished stainless steel AISI 316
housing - white chipboard with a thickness of 16mm
guide posts – aluminum profile painted with powder paint dark gray (RAL 7011)
2 dependent lifting screens – tempered glass in aluminum frames, lifting 0-710mm, do not change the dimensions of the cabinet when lifting.
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Exhaust cabinet LAB-800 ballscrews
Working surface: Porcelain stoneware (ceramic tile 300*300mm)
Length, mm: 832
Depth, mm: 925
Height, mm: 2100
equipment
Working box
the side and back panels are lined with a row of ceramic tiles to a height of 400mm
the case is melamine with a thickness of 16mm
lifting screen with the possibility of fixing at any height – organic acrylic glass with a thickness of 8mm, lifting 0–750mm, increases the height of the cabinet with a full lift by 430mm
LOIP
Saint Petersburg
Produced in: Saint Petersburg
General purpose exhaust cabinet LAB-PRO SHV 90.84.230 TR
BASIC EQUIPMENT
Working box
guide racks – aluminum profile painted with powder paint (RAL 7035/RAL 5023)in the right rack there are a light switch and 2 splash-proof sockets with a 3.2kW cover (IP54)
the front anti–spill side is acid-resistant polished stainless steel AISI 304
side panels – tempered glass
2 dependent lifting screens – tempered glass in aluminum frames, lifting 0-780mm, do not change the dimensions of the cabinet when lifting
the upper fixed screen – metal painted with powder paint (RAL 5023) with the texture of shagreen leather
back and top panels –
polypropylene LED lamp dust- and moisture-proof (22W IP65)
switching box with automatic emergency power off 16A
flange d=250mm (the distance from the rear panel to the center of the flange is 170mm)
easily removable exhaust visors
3 exhaust levels (lower, side and front)
counterweights are placed in the front pylon racks and are easily serviced
The frame base
is a collapsible frame made of a rectangular metal profile painted with powder paint (RAL 7035) with the texture of shagreen leather
service panel is a metal box painted with powder paint (RAL 5023) with the texture of shagreen leather:
adjustable supports.
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Exhaust cabinet LAB-M SHV 180.74.210 KG
Furniture for laboratory work.
Exhaust cabinet made of chipboard
Working surface: Porcelain stoneware (ceramic tile 300*300mm), stitching - epoxy compound
Overall dimensions:
Length, mm: 1800
Depth, mm: 740
Height, mm: 2100
equipment
Working box
front anti–spill side - acid–resistant polished stainless steel AISI 316
housing - white chipboard with a thickness of 16mm
guide posts – aluminum profile painted with powder paint dark gray (RAL 7011)
2 dependent lifting screens – tempered glass in aluminum frames, lifting 0-710mm, do not change the dimensions of the cabinet when lifting.
LOIP
Saint Petersburg
Produced in: Saint Petersburg