NV LAB

The SHVM NVK 1200 MON+ is a metal fume cupboard with plumbing for work in the laboratory. The table top is made of monolithic ceramics, its width is 1200 mm. External dimensions of the cabinet (W×D×H): 1260×750×2250 mm. Internal dimensions of the camera (W×D×H): 1200×600×1168 mm. Table top material: monolithic ceramic. A reliable and durable fume cupboard for the laboratory The table top is made of a single ceramic plate with a width of 1200 mm. The seamless monolith of the countertop provides the highest reliability and durability. The ceramics are great for all chemical laboratories, including those that work with substances at high temperatures. It perfectly tolerates heat, is moisture-resistant, resistant to acids and alkalis. High-temperature equipment (drying cabinets, muffle furnaces) can be placed on the table top. The cabinet is mounted on an all-welded metal frame covered with durable powder paint. All panels are made of polymer-coated metal. The front anti-spill side is made of AISI-316 polished stainless steel. There are four exhaust zones in the working chamber: they are located in the hood of the exhaust box and above the level of the countertop. Diameter of the flange for connection to the ventilation system: 150 mm. The hood area is also made of metal. The protective screen of the cabinet can be easily lifted with one hand. It folds up and when lifted does not increase the overall height of the cabinet. It is made of 4 mm tempered glass in an aluminum frame. The small sink-drain is made of polypropylene, resistant to aggressive chemicals. Its internal dimensions: 218×115×122 mm. The faucet is made of brass and covered with polypropylene. The sockets and the switch of the LED lamp are located outside the working area, on the right-hand side of the front panel of the cabinet. The sockets are splash-proof and designed for current up to 16 A and voltage up to 250 V. Next to the switch there is a toggle switch of the automatic emergency power off. The reagents needed for work can be placed in the lower cabinet. The cabinet is also made of metal. It has three swing doors and one fixed shelf. It has its own hood (pipe diameter 100 mm), which can be connected to the general exhaust system of the cabinet using the nozzle included in the cabinet kit. The cabinet legs are adjustable in height, allowing you to place the cabinet even on a rather uneven floor. Advantages of the cabinet SHVM NVK 1200 MON+ A metal fume cupboard with plumbing, an excellent choice for any laboratory; Durable, reliable and very convenient to use; The protective screen is made of tempered glass; The hood is built into the cabinet, reagents can be safely stored in it. Application of the SHVM NVK 1200 MON+ cabinet Exhaust laboratory cabinets are used when working with toxic and harmful volatile materials, with clean materials, with dissolution or decomposition under heat treatment, when conducting sample analysis. Fume cupboards of the NV-Comfort series are used in laboratories of the widest profile: at food and light industry enterprises, in higher educational and scientific institutions, in chemistry classrooms at school, in quality control centers, medical organizations.

The Kors NV-1200 SHV-U laboratory fume hood is a single—frame cabinet with a ceramic granite countertop 1100 mm wide and a small built-in polypropylene sink. External dimensions of the cabinet (W×D×H): 1100×700×1960 mm. Dimensions of the working area (W×D×H): 1068×540×750 mm. Table top: granite tiles. Reliable fume cupboard for laboratories The cabinet is available in two versions: with a hood from the lower cabinet and without it. In a cabinet with a hood, various aggressive reagents can be stored, in a cabinet without a hood, it is better to store only laboratory glass or instruments. Working surface material: porcelain tile. It is moisture-resistant and perfectly withstands high temperatures. It is resistant to prolonged exposure to concentrated acids, alkalis and organic solvents. Limited resistance to hydrofluoric acid. This is one of the most popular types of countertops for laboratory furniture. The small sink-drain is made of polypropylene, resistant to aggressive chemicals. Its diameter is 135 mm and its depth is 110 mm. The base of the cabinet is made on an all-welded metal frame in powder coating. The side laminated panels (chipboard 16 mm thick) are edged on the facade with a durable PVC edge 2 mm thick, which increases their impact resistance and mechanical strength. The cabinet legs are adjustable in height within two centimeters, allowing you to place the cabinet even on a fairly uneven floor. Working area of the fume cupboard The working area is closed by one lifting frame with a counterweight. It has two exhaust zones: the hood of the exhaust box and the level of the countertop. Diameter of the flange for connection to the ventilation system: 150 mm. Working area size (W×D×H): 1068×540×750 mm. Please note that the cabinet narrows upwards. At a height of 50 cm, the depth of the working area will be 410 mm, at a height of 70 cm: 365 mm. If you need to place high equipment, then make sure that it is small enough in length, otherwise you will not be able to close the cabinet. The working area is illuminated by a fluorescent lamp (included in the package). The switch is located on the right side of the cabinet, next to the sockets. The fume cupboard is equipped with two sockets, one of them with grounding. Sockets have the IP20 degree of protection, maximum load: 1.5 kW. What are the other options? If you need to place large equipment, you may be interested in the cabinets for muffle furnaces. Also in the line there are large cabinets with plumbing fixtures: NV-1500 NV-U and two-frame NV-1500 SHV-U and NV-1800 SHV-U.

The NV-600 TDn cabinet on wheels with two doors and a shelf insert The standard version of the cabinet on wheels for the laboratory table includes: 2 hinged doors an insert shelf 2 mm shockproof PVC edge on the countertop and facade plastic wheels In the standard version, we offer cabinets for laboratory tables in gray color. However, in agreement with the customer, it is possible to change the color to white, without increasing the cost. We are also ready to adapt the size and materials so that they meet your needs.

The NV-800 MOP is a table with a deep sink made of polypropylene and with a plastic dryer for 18 dishes. It is designed for standing work: the height of the countertop is 85 cm. Dimensions when assembled (W×D×H): 800×600×1650 mm. The table top is made of laminated chipboard. It has a built-in Stegler WJH0357F polypropylene sink, its internal dimensions (W×L×H): 490×390×290 mm. The polypropylene is resistant to prolonged exposure to concentrated acids, alkalis and organic solvents and is excellent for washing laboratory dishes. The side laminated panels of the table (chipboard 16 mm thick) are edged on the facade with a 2 mm PVC edge, which increases their impact resistance and mechanical strength. The package includes a stainless steel mixer with flexible 300 mm tap connectors and a siphon. The upper part of the inclined shelves of the dryer on which dishes are placed, is covered with a polypropylene insert to protect against water and reagents. The pins are also made of polypropylene. The legs of the table are adjustable in height within two centimeters, allowing you to place it even on a rather uneven floor. Advantages of NV-800 MOSFET tables A minimalistic compact model with polypropylene sink and dryer. An inexpensive solution for laboratories that value the reliability and durability of furniture. Due to its size, it is suitable for very small rooms. Application of NV-800 MOP tables Tables of the NV series are used in laboratories of the widest profile: at food and light industry enterprises, in scientific and educational workshops, in chemistry classrooms, quality control centers, medical organizations and many others.

The NV-750 VG is a specialized laboratory table with a damping concrete slab on a sand cushion. It is used to keep sensitive analytical equipment, primarily scales. The table is designed for sitting work. Dimensions when assembled (W×D×H): 750×600×750 mm. The size of the countertop for scales: 400×400 mm. Special anti-vibration design The three-layer design of the table allows you to maximally dampen vibrations that prevent the accurate operation of the scales: 1st layer: sand cushion. The main countertop has a built-in drawer open from above, which contains a sand cushion. 2nd layer: concrete slab — weighting. A heavy concrete slab is placed on a sand cushion. 3rd layer: a small table top. The small table top is attached to the concrete slab, completely covers it and does not come into contact with the main table top (and, therefore, does not transmit vibrations from it). The size of anti-vibration (small) table tops: 400×400 mm. For maximum isolation from vibrations, the scales should be placed in the center of this countertop. Table base: all-welded metal frame, painted with white powder paint. The design does not use rubber dampers, which have a limited service life. Both countertops are made of laminated chipboard. It is well suited for the placement of devices, but is not resistant to concentrated acids, alkalis and organic solvents. The damping surface protrudes above the main tabletop, but visually it does not differ from it in any way. The countertops and side laminated panels (chipboard 16 mm thick) are edged with a durable PVC edge 2 mm thick, which increases their impact resistance and mechanical strength. The legs of the table are adjustable in height within two centimeters, allowing you to place it even on a rather uneven floor.

Kors NV-1200 SHV-PB Laboratory fume cupboard is a single—frame cabinet with a width of 1100 mm with a table top made of polypropylene. External dimensions of the cabinet (W×D×H): 1100×700×1960 mm. Dimensions of the working area (W×D×H): 1068×540×750 mm. Table top: polypropylene. Convenient fume cupboards for comfortable work in the laboratory Working surface material: monolithic polypropylene. It is moisture-resistant, resistant to prolonged exposure to concentrated acids, alkalis and organic solvents. Poorly resistant to high temperatures. Polypropylene countertops are suitable for chemical laboratories that work a lot with concentrated inorganic acids and alkalis. The working area is closed by a single lifting frame with a counterweight. It has two exhaust zones: the hood of the exhaust box and the level of the countertop. Diameter of the flange for connection to the ventilation system: 150 mm. Working area size (W×D×H): 1068×540×750 mm. Please note that the cabinet narrows upwards. At a height of 50 cm, the depth of the working area will be 410 mm, at a height of 70 cm: 365 mm. If you need to place high equipment, then make sure that it corresponds to the dimensions of the camera, otherwise you will not be able to close the cabinet. The height of the raised glass above the cabinet: 510 mm, that is, when the glass is raised, the total height of the cabinet will be 2470 mm. The working area is illuminated by a fluorescent lamp (included in the package). The switch is located on the right side of the cabinet, next to the sockets. The fume cupboard is equipped with two sockets, one of them with grounding. Sockets have the IP20 degree of protection, maximum load: 1.5 kW. The base of the cabinet is an all-welded metal frame in powder coating. The side laminated panels (chipboard with a thickness of 16 mm) are edged with a durable PVC edge with a thickness of 2 mm, which increases their impact resistance and mechanical strength. The cabinet legs are adjustable in height within two centimeters, allowing you to place the cabinet even on a rather uneven floor. What are the other options? There are larger cabinets with polypropylene countertops: NV-1500 SHV-PB, NV-1500 SHVD-PB and NV-1800 SHVD-PB.

NV-1500 Ln are laboratory tables with a metal frame and a tabletop width of 1500 mm. They are designed for sitting work (the height of the table is 750 mm, this is the height of a regular office desk). The tables have a metal frame painted with durable powder paint. The side laminated panels (chipboard 16 mm thick) are edged on the facade with a durable PVC edge 2 mm thick, which increases their impact resistance and mechanical strength. The legs of the table are adjustable in height within two centimeters, allowing you to place it even on a rather uneven floor. Dimensions of the table when assembled: 1500×700×750 mm. Working surface for your classes We offer laboratory tables with different working surface material: Version: Countertop NV-1500 LLn: Laminate. An inexpensive solution, suitable for school chemistry and physics classrooms, office work, placement of devices. NV-1500 LSPn: Chemically resistant plastic. A good choice for training workshops, analytical and medical laboratories. It does not tolerate high temperatures, heating devices should not be placed on the surface. NV-1500 LKn: Granite tiles. A practical solution for most chemical, biological, medical laboratories and workshops. You can put on it drying cabinets, baths and other heating devices. NV-1500 LPn: Polypropylene. A specialized solution for chemical laboratories working with inorganic solvents. Advantages of NV-1500 tables The robust all-welded frame ensures the reliability and durability of the table. You can choose a suitable work surface for your tasks. It is designed to work while sitting, its height is like that of a regular office desk. Application of NV-1500 tables Tables of the NV series are used in laboratories of the widest profile: at food and light industry enterprises, in scientific and educational workshops, in chemistry classrooms, quality control centers, medical organizations and many others.

The NV-1200 LKv-Yar is a laboratory table with a countertop made of granite tiles. The width of the table top is 1200 mm. It is designed for standing work (table height — 850 mm) and is usually used for placing devices. The table top is made of granite tiles. The tile is moisture-resistant and perfectly withstands high temperatures. It is resistant to prolonged exposure to concentrated acids, alkalis and organic solvents. Limited resistance to hydrofluoric acid. This is one of the most popular types of countertop materials for laboratory furniture. Two 220 V sockets are built into the table, one of them is grounded. The side laminated panels (chipboard 16 mm thick) are edged on the facade with a PVC edge 2 mm thick, which increases their impact resistance and mechanical strength. The legs of the table are adjustable in height within two centimeters, allowing you to place it even on a rather uneven floor. Dimensions of the table when assembled (W×D ×H): 1200×700×850 mm. Advantages of tables NV-1200 LKv-Yar An inexpensive solution for laboratories that value the reliability and durability of furniture; Suitable for small rooms; Heating plates or baths can be placed on the granite surface resistant to high temperatures; It is convenient to work while standing: the height of the working surface is 85 cm; In the drawers you can store accessories to the devices that are on the table, or laboratory utensils. Application of tables NV-1200 LKv-Yar Tables of the NV series are used in laboratories of the widest profile: at food and light industry enterprises, in scientific and educational workshops, in chemistry classrooms, quality control centers, medical organizations and many others.

The NV-1210 LCv is a laboratory table with a metal frame and a table top made of monolithic ceramics. Table top width: 1210 mm. The table is designed for standing work, its height is 850 mm. The table top made of monolithic ceramics is moisture-resistant, perfectly withstands high temperatures. As there are no seams, ceramic granite tiles are better resistant to chemicals and heat. It is possible to place high-temperature equipment on it. NV-1210 tables have a metal frame painted with durable powder paint. The side laminated panels (chipboard 16 mm thick) are edged on the facade with a 2 mm PVC edge, which increases their impact resistance and mechanical strength. The legs of the table are adjustable in height within two centimeters, allowing you to place it even on a rather uneven floor. Dimensions of the table when assembled (W×D ×H): 1210×610×850 mm. Advantages of NV-1210 LCv tables An inexpensive solution for laboratories that value the reliability and durability of furniture; Suitable for small rooms; Heating plates or baths can be placed on the granite surface resistant to high temperatures; It is convenient to work standing up: the height of the working surface from the floor is 85 cm. Application of NV-1210 LCv tables Tables of the NV series are used in laboratories of the widest profile: at food and light industry enterprises, in scientific and educational workshops, in chemistry classrooms, quality control centers, medical organizations and many others.

The NV-400 SB cabinet is designed to store one gas cylinder with a chain attachment for the cylinder. The cabinet is made of laminated chipboard with a shockproof PVC edge of 2 mm on the facade. The standard version of the laboratory cabinet for storing chemicals NV-400 SB includes: 1 door; chain attachment for the cylinder. Additional equipment (options): a lock in the door; drawers.

This small mobile table is designed to move heavy equipment around the laboratory. When not in use, it can be moved under a regular office desk as the height of the NV-600 STP is 65 cm. The table top is made of laminated chipboard. The NV-600 STP has a metal frame painted with durable powder paint. The side laminated panels (chipboard 16 mm thick) and the lower shelf are edged on the facade with a 2 mm PVC edge, which increases their impact resistance and mechanical strength. The table wheels allow you to conveniently move the equipment around the laboratory. For easier movement, the table is equipped with side handles. In the drawer and on the bottom shelf, you can store equipment accessories or the necessary small stuff. Dimensions of the table when assembled (W×D×C): 600×350×650 mm. Advantages of NV-600 STP tables Small size: if it is not needed, it can easily be moved under a regular table. An inexpensive solution for laboratories that value the reliability and durability of furniture. Suitable for the small rooms. Application of NV-600 STP tables NV series tables are used in laboratories of the widest profile: at food and light industry enterprises, in scientific and educational workshops, in chemistry classrooms, quality control centers, medical organizations and many others.

The NV-800 SHD cabinet with 4 shelves-inserts is designed for storing documents. The cabinet is made of laminated chipboard with a shockproof PVC edge of 2 mm on the facade. Included in the set: -2 glass doors on the upper compartment; -2 glass doors in the lower compartment; -4 shelves-inserts made of laminated chipboard; -metal legs 100 mm high.