VIS MED

A disposable tablet card for determining blood group and Rh factor. The tablet is made of a special material that does not allow the drop to spread. On the front side of the hole are round, on the back side of the hole are oval. Tablet size: 15x12 cm. Number of holes on the front side: 30 pcs. Number of holes on the reverse side: 12 pcs. The diameter of the hole on the front side: 1.8 cm. The diameter of the hole on the reverse side of the larger diameter: 3 cm. The tablet configuration is 6 rows of 5 holes. in each. Alphanumeric marking — (1, 2, 3, 4, 5, 6, 7, 8, 9, 10). There are 12 oval holes on the front side, 30 round holes on the back side. The product is made of a special material completely repeating and replacing the polystyrene tablet, which makes it possible to reduce the cost of the product without loss of quality. The one-time card is convenient and easy both to analyze and to dispose of. The configuration of the wells prevents spreading during immunological tests .

Transparent film without a substrate, designed for thermal sealing of PCR tablets. It is adapted to most thermal protection devices and tablets from other manufacturers. It is ideal for transportation and long-term storage of highly sensitive samples. The film is easily removed after sealing without breaks, which eliminates the need to pierce it. Sealers: PX1 PCR Plate Sealer, Bio-Rad; DTpack, DNA technology; ALPS 50 V, Thermo FS; Heat sealer S100-200, Eppendorf; E-seal, KBiosystems; and other popular models. Thickness: 60 microns. Material: Polyester Material thickness: 0.055 mm. Temperature range: -170+175 °C Sealing: 2-3 sec. Film integrity:-80°C ... +110°C Packaging: 100 pcs.

Laboratory sticks for mixing, disposable. Material: Polypropylene Package quantity: 500 pcs. They are used as auxiliary products when carrying out immunological reactions in the well of the tablet, when mixing samples, reagents. Laboratory mixing sticks are a plastic rod with a length of 120 mm. and with a diameter of 3 mm., without notches.

Material of manufacture: Plexiglass Product Color: Transparent Tripod legs: rubber (to prevent sliding) For test tubes: 0.2 ml.

Block of well microaquariums 5 rows of 9 holes GOST 31674-2012

Volume: 30 ml Material of manufacture: PVC Dimensions: 100 x 50 x 19 mm It is intended for filling with a solution (chemical reagents, reagents, biological fluids, etc. in concentrations used in clinical and diagnostic laboratories, with the exception of concentrated organic solvents) with the subsequent selection of this solution by dispensers during diagnostic studies in medical and preventive and research laboratories.

Format, number of holes: 96 Material of manufacture: Silicone Product Color: Colorless Alphanumeric markings are applied Temperature range: -50 to +130 °C

Test the card according to your parameters The cards are made of a special material completely repeating and replacing polystyrene tablets, which makes it possible to reduce the cost of products without loss of quality. Disposable cards are convenient and easy to analyze and dispose of. The configuration of the wells prevents spreading during immunological work. Hole color: as agreed Size: by agreement Quantity in the package: by agreement

The film is suitable for all types of thermal cycling, including real-time PCR. Pressure-sensitive adhesive film does not stick to gloves. This premium product guarantees tightness during amplification. Similar to imported samples. Temperature range: -70+100 °C Material: Polyolefin Packaging: 100 pcs.

The 96-hole tablet of the standard profile is made of ultrapure polypropylene for PCR. The wells have thin walls (0.3-0.35 mm.), providing rapid heat exchange, allowing optimal amplification results to be achieved. The wells are easily separated from each other in any direction into any number of tubes (up to a single one). Compatible with SFG adapters for PCR amplifiers. Tablets are convenient both for high-performance laboratories and for single analyses. The presence of a skirt — Without a skirt Material — Ultrapure Polypropylene The wall thickness is 0.3 — 0.35 mm. Color — White Sterility — Heat treatment in an autoclave at 121 °C for 15 minutes. Marking — Alphanumeric with engraving Profile: Standard

Tripod "workplace" for single and stripped 0.2 ml tubes, 96 seats

PCR tablet for 96 wells 0.2 ml., without skirt, standard profile, (Natural)