LOIP

Technical specifications: The volume of the analyzed sample is 5 ml The volume of the test chamber is 25 ml Test temperature 37.8°C Accuracy of maintaining the temperature of the chamber ±0.1 °C Pressure measurement range 0.01...200 kPa Pressure measurement accuracy ±0.01 kPa Gas/liquid ratio 4/1 Power consumption from 220 mains, no more than 150 watts USB, LAN interface Overall dimensions, no more 450x230x190 mm Weight, not more than 15 kg

BASIC EQUIPMENT Working box front guide posts – aluminum profile painted with powder paint (RAL 7035/RAL 5023), in the right rack there are a light switch and 2 splash–proof sockets with a 3.2kW cover (IP54) front anti–spill side - polypropylene working surface - polypropylene 15mm thick removable plate 600*600mm with a ceramic granite work surface for placement heating plates (2 pcs.) 2 dependent lifting screens filled with transparent PVC, 5mm thick in a polypropylene frame in the lower screen – sliding doors made of transparent PVC with a thickness of 5mm lifting 0-780mm, does not change the dimensions of the cabinet when lifting the counterweights are placed in the front pillars-pylons and are easily serviced upper fixed screen – polypropylene inner part the working box is a fully sealed polypropylene capsule with a back wall washing system, a drainage channel and a polypropylene pipe for cold water 3 levels of hoods easily removable polypropylene exhaust canopies polypropylene drain sink on the top panel are placed: LED dust- and moisture-proof lamp (2X22W IP65) separated from the workspace by transparent PVC switching box with automatic emergency power off 16A flange with damper plug for air inflow d=200mm flange with aspiration collector for air outflow d=250mm (distance from the rear panels up to the center of the flange – 155mm) cabinet ventilation system

The LOIP LT-411b modification device consists of an immersion thermostat-circulator LOIP LT-400 and a working bath with a lean-to hinged lid. Technical specifications: Temperature range: without external cooling, °C Current+10 ... +200 with tap water cooling °C Tvods+5 ...+200 Accuracy of temperature maintenance, °C ± 0.01 The error of setting the set temperature, not more than, ° C ± 0.02 Heater power, W 2200 Pump: max. flow rate, l/min 6...12 pressure, 0.4 bar Bath volume, l 11 The working fluid is water, silicone oil. The open part of the bath / depth, mm 165x230/200 Overall dimensions, mm 268x335x400 Weight, kg 11.4

Island table Table top: LAMINAT (table top consists of 2 cohesive parts, the seam is treated with moisture-resistant glue) Length, mm: 1800 Depth, mm: 1500 Height, mm: 900 BASIC EQUIPMENT The base is a collapsible metal frame made of rectangular steel profile, painted with powder paint (RAL 7035) with the texture of shagreen leather Four easily removable screens (RAL 7035) and two non-removable (RAL 5023) Hidden fasteners Adjustable supports (0-40 mm) A set of end boxes-plugs

Furniture for laboratory work. Cupboard for dishes Length, mm: 800 Depth, mm: 500 Height, mm: 1940 PACKAGE CONTENTS housing – melamine white 16 mm thick, ABS edge dark gray facades – tinted light gray glass 4 compartments (upper 686 mm high, lower 1076 mm high) 10 shelves (2 built-in, 8 removable (2 in the upper compartments, 6 in the lower ones) with the possibility of rearrangement at 3 levels in height each).

Metal single support cabinet with door Length, mm: 540 Depth, mm: 500 Height, mm: 860 Completely made of powder-coated steel (RAL 7035) with the texture of shagreen leather Frameless housing design One compartment with a swing door The side walls, the facade are double. The thickness of the side walls is 19 mm, the facade is 18 mm The facade is filled with noise-absorbing material, equipped with a lock Hinges with an opening angle of 270o Handle - polypropylene Easy-to-remove shelf with the possibility of installation at 3 different height levels. The shelf has a lock The permissible load on the shelf is 30 kg. Hidden adjustable supports (0 - 40 mm). The adjustment of the supports is carried out from inside the pedestal through the base. 8 standard variants of LAB-PRO RP work surfaces

Furniture for laboratory work. Reagent storage cabinet Length, mm: 900 Depth, mm: 500 Height, mm: 1940 PACKAGE CONTENTS housing – metal painted with white powder paint (RAL 9016) roof, bottom, shelves - metal painted with dark gray powder paint (RAL 7011) facades - metal painted with white powder paint (RAL 9016) 1 loop compartment outside the storage area (pin system) 4 shelves without the possibility of height adjustments.

Technical specifications: Performance 4l/h Storage tank capacity 8 l Water consumption 54 l/h Electrical conductivity of the distillate, no more 2.5 mcm/cm Food 220 V / 50 Hz Power consumption 3 kW Overall dimensions 620x320x493 Weight 21.5kg

Furniture for laboratory work. Wardrobe Length, mm: 900 Depth, mm: 500 Height, mm: 1940 PACKAGE CONTENTS housing – metal painted with white powder paint (RAL 9016) roof, bottom, shelves - metal painted with dark gray powder paint (RAL 7011) facades – metal painted with white powder paint (RAL 9016) 1 compartment 2 shelves without the possibility of height adjustment (a shelf for hats and a shelf for shoes).

Wall-mounted table Combined working surface: main table top - KG-ESS (porcelain stoneware) with a side made of stainless steel, 650 mm deep / auxiliary table top made of TRESPA material with a depth of 150 mm Length, mm: 1200 Depth, mm: 800 Height, mm: 750 BASIC EQUIPMENT The base is a collapsible frame made of rectangular steel profile, painted with powder paint (RAL 7035) with the texture of shagreen leather Hidden fasteners Two easily removable rear screens (RAL 7035) and one non-removable (RAL 5023) Rear side boxes Adjustable supports (0-40 mm)

Technical specifications: Melt flow rate for 10 min, g 0,1 - 99,9 The dimensions of the capillary opening, mm dia. 2,095 diam. 1,048 (optional) diam. 1,180 (optional) Set of loads, kg 0,325-5 10-21,6(optional) Temperature range in the working chamber, °C +50...+450 Accuracy of temperature maintenance, °C: - in the range of 50...300 °C: ± 0.1 - in the range of 300...350 ° C: ± 0.2 - in the range of 350...450°C: ±0.3 The discreteness of setting the temperature of the chamber, ° C 1 Time to enter the operating mode, no more, min 40 Power supply, V/kW 220/0.8 Installation dimensions, WxDxH mm 513x445x590 (920 – Maximum height with a fully loaded polymer chamber and a full stack of loads with a handle for their installation) Installation weight, not more than 70 kg

BASIC EQUIPMENT Working box the front guide posts are aluminum profile painted with powder paint (RAL 7035/RAL 5023), in the right rack there are a light switch and 2 splash–proof sockets with a 3.2kW cover (IP54) the front anti-spill side is acid-resistant polished stainless steel. AISI 304 steel rear, upper, side panels – metal painted with powder paint (RAL 7035) with the texture of shagreen leather the inner surfaces of the working box are lined with chemically resistant HPL plastic 2 dependent lifting screens – tempered glass in aluminum frames, lifting 0-780mm, do not change the dimensions of the cabinet when lifting the upper fixed screen – tempered glass in an aluminum frame on the top panel: LED dust- and moisture-proof lamp (2X10W IP65) is separated from the workspace by tempered glass thickness of 4mm flange d=250mm (distance from the back panel to flange center – 170mm) easily removable exhaust canopies 3 exhaust levels on the left side panel service module with cold water supply pipe and wall-mounted drain sink made of polypropylene cold water supply valve in the left rack of the box counterweights are placed in the front racks-pylons and are easily serviced Frame base collapsible frame made of rectangular metal profile painted with powder paint (RAL 7035) with the texture of shagreen leather service panel - aluminum profile painted with powder paint (RAL 7035/RAL 5023) with the texture of shagreen leather adjustable supports module with two drawers