Termeks

It is designed to accommodate various objects in the inner bath of the CRYO thermostat VT 01. The height-adjustable bottom allows objects to be immersed in the coolant to the required depth. Internal dimensions 105x175x250 mm Weight 1 kg

It is designed to maintain a set temperature of a liquid coolant circulating both in an internal bath and in external closed-type consumers. Feed pump for external closed-type thermostating systems. All-metal stamped tub with a volume of 10 liters and a depth of 200 mm. The stability and uniformity of the temperature in the inner bath is not worse than ± 0.1 ° C. The operating temperature range is +20...+200 °C. The volume of the bath is 10 liters Overall dimensions 400x275x480 mm The open part of the bath is 120x200 mm Bath depth 200 mm Weight 14 kg Power consumption 2.2 kW

It provides clear visibility of the labels of viscometers located in the thermostat bath. This creates additional convenience and increases the accuracy of measurements.

Silicone hose with thermal insulation and an internal diameter of 8 mm is used to connect the A160 and A300 circulation coolers with the W series thermostats or to external consumers.

The holder with flat steel springs allows you to install and securely fix up to 6 verifiable thermometers with a diameter of the submerged part from 16 to 20 mm. It is designed for calibration thermostats THERMOTEST-100 and THERMOTEST-300.

General laboratory cabinet with a width of 900 mm, a height of 2025 mm made of painted steel for storing clothes. One compartment with a shelf and a barbell. Overall dimensions 900x500x2025 mm Weight 81 kg

The total volume of the chamber is 65 l Overall dimensions 480x620x1070 mm Weight 33 kg Power consumption 200 W

The thermometer sensor ExT-01/3-30 is made in the form of a fully submersible probe with a cable length of 30 meters and has a device for winding it. The thermometer has an explosion protection marking 0Ex ia IIB T4 Ga X and can be used in explosive zones 0, 1 and 2 of any classes of premises and outdoor installations in which the formation of explosive mixtures of categories IIA, IIB is possible. • Measurement range -50...+130 °C Minimum sensor immersion depth full immersion Overall dimensions of the electronic unit 135x65x40 mm Electronic unit weight 0.3 kg

It is used to connect LT-300 thermometers to a personal computer via a USB interface. This is a "native" device for the ThermoChart program. The use of this adapter does not require the installation of additional drivers because it uses the HID driver built into the operating system to exchange data.

Operating temperature range -30...+100 °C Four places for glass viscometers or a basket for determining the pour point of petroleum products. The stability and uniformity of the temperature in the working bath is not worse than ± 0.02 ° C. Bath volume 15 l Overall dimensions 440x710x620 mm The open part of the bath is 140x170 mm Bath depth 320 mm The size of the viewing window is 104x270 mm Weight 56 kg Power consumption 3.5 kW

It is used to connect TDS thermometers and MASTER thermostats equipped with an RS 485 interface to a personal computer via a USB interface. The use of this adapter does not require the installation of additional drivers because it uses the HID driver built into the operating system to exchange data.

It is intended for thermostating samples in glasses, flasks and other laboratory utensils in cases where high accuracy of temperature maintenance is not required and good uniformity of the temperature field in the working volume is not needed. The operating temperature range is Current +5...+200 °C. Six workstations with a diameter of 110 mm with five steel O-rings, tripods and feet with a clip. Stamped steel tub with a volume of 19 liters and a depth of 110 mm. Bath volume 19 l Overall dimensions 570x660x660 mm The open part of the bath is 500x290 mm Bath depth 110 mm Weight 13.5 kg Power consumption 2.5 kW