Primelab

Borosilicate glass is used to make the cell body due to its chemical inertness and resistance to high temperatures. It does not react with most chemicals and has high thermal stability, which allows it to be used in a variety of conditions. The advantages of borosilicate glass electrochemical cell include: - High chemical resistance: Borosilicate glass is highly resistant to various chemical agents, allowing the cell to be used with a variety of reagents. - Thermal Resistance: Borosilicate glass can withstand high temperatures, allowing you to work with high temperature reactions or use the cell in elevated temperature environments. - Transparency: Borosilicate glass is transparent to visible light, allowing the processes occurring inside the cell to be observed. - Mechanical strength: Borosilicate glass has high impact resistance and mechanical strength, which allows the cell to be used in a variety of operating conditions. Borosilicate glass electrochemical cells are widely used in various fields, including chemical, biological, pharmaceutical and energy industries, as well as scientific research. They are reliable and efficient devices that allow various electrochemical processes to be carried out.

Flat-bottomed flask P-1-2000 29/32 Primelab is actively used as a reaction or receiving vessel due to its ground section measuring 29/32 and diameter 166 mm, spherical shape and thermal stability. Suitable for working with aggressive and toxic substances, the volume of which does not exceed 2 liters. The height of the entire product is 250 mm.

Vacuum membrane pump PL.HM01.01.6 Primelab is a compact, chemical-resistant and efficient laboratory device made in Russia. Designed to create a vacuum, drying and filtration under vacuum conditions, as well as pumping steam-gas-air media. The Primelab company has developed a pump in accordance with IP20 protection class. Absolutely safe: its chambers are made of fluoroplastic, the connections are covered with a fluoroplastic coating. Productivity is 38 l/min at a maximum vacuum of 6 mbar. In operating mode, the noise level does not exceed 75 dB. In Russia, the Primelab vacuum diaphragm pump PL.HM01.01.6 is subject to warranty and post-warranty service. Supplied complete with everything you need to get started.

The borosilicate glass vessel from PrimeLab is an effective laboratory accessory that can be used to carry out various processes. This includes heating, mixing, storing reagents and other substances. It has high thermal resistance, chemical inertness, long service life and absolute transparency. This allows you to control all processes inside the glass vessel. The borosilicate glass vessel can be manufactured by Primelab according to the customer's individual requirements.

Primelab is a company that produces and sells laboratory glassware of its own production. Accepts orders and carries them out in strict accordance with the customer’s technical specifications. The Richter Absorber Primelab is available in high-speed and small subtypes. Both are designed to purify liquids, gases and other impurities. The first is suitable for working with large volumes of gases or quick cleaning, and the second is for small volumes. They have an identical shape in the form of an elongated vessel with two spherical extensions at the top and two tubes. The Richter absorber was manufactured by Primelab from Czech borosilicate glass Simax, which is known for its strength and wear resistance. Suitable for use in various laboratories and small industries.

The latest development, the Primelab high-power top-drive mixer, has virtually no analogues even among models from the world's leading manufacturers. It helps solve a wide range of problems related to mixing dense, viscous samples, reagents, and materials. With its help, you can achieve rapid homogenization of the mixture. A significant plus: the graphic display is large and easy to read. With it, the employee working with the mixer will not get tired eyes, even if the mixing work needs to be carried out for several hours in a row. The steel case with durable plastic inserts is resistant to damage, which provides good protection for the device mechanism. The model is easy to operate. It works quite quietly and does not produce a lot of splashes. Main applications of the mixer: • light industry; • petrochemistry; • pharmaceuticals; • medicine; • physical and chemical analysis. Features and Benefits • Thanks to the ergonomic design of the stirrer body, it can be used not only in stationary laboratories, but also in mobile mobile stations. • The submersible type device is used to implement a wide range of laboratory work. • Starting and stopping the mixer is carried out using just one button located on the front panel. • Smooth power control handle. • The noise level remains no more than 50 dB, which creates comfortable working conditions for employees with this equipment. • An overheating system is provided, which is ensured by design features. Characteristics • Country Russia • Display type: LCD • Stirrer shaft diameter max.: 10 mm • Motor type: Brushless • Voltage: 220/50 V • Protection class acc. with DIN EN60529: IP42 • Sample volume (water): 50 liters • Timer: yes (digital) • Device weight: 2.8 kg • Dimensions, WxHxD: 72x260x197 (without rod) • Power consumption, W: 105 • Grounding: Yes • Overheat protection (shutdown): Yes • Maximum torque: 1.3 Nm (at 360 rpm) • Rated torque: 0.4 Nm (at 2200 rpm) • Rotation speed: 20-3000 rpm • Speed adjustment: Encoder (Valcoder) • Accuracy of maintaining the set speed: 5% • Limit state signaling: Optical and acoustic • Display color: Color • Resolution of rotation speed setting: 1 rpm • Chuck type: Three-jaw with manual locking • Parameter display: Optical • Resolution of rotation speed display: 1 rpm • Display size (diagonal, inches): 2.4 Contents: The device delivery set includes: 1) device – 1 pc.; 2) power supply – 1 pc.; 3) power cable – 1 pc.; 4) instruction manual combined with a passport – 1 pc.; 5) bracket Ø13 mm. for attaching the device to a tripod – 1 pc.; 6) hex key 2 mm. - 1 PC.

Flat-bottomed flask P-2-2000-76 Primelab, TS is suitable for a wide range of laboratory processes. These include preparation of solutions, synthesis, filtration, distillation, distillation, evaporation, etc. Thanks to the relatively wide neck, the diameter of which is 76 mm, it is suitable for working with bulk and liquid substances with a volume of up to 2000 ml. The diameter of the ball is 166 mm with a height of the entire product of 250 mm.

Conical flasks with thread GL18 Primelab are functional and reliable instruments that are an integral part of any laboratory and beyond. Suitable for a wide range of applications, including heating reagents, storing, mixing, carrying out reactions, etc. The conical shape ensures stability on an equal surface, uniform mixing of substances and improved heat transfer, which is important when carrying out certain chemical reactions. The presence of a GL18 thread makes it possible to securely close the flask and prevent leakage of substances. PrimeLab GL18 threaded conical flasks are made of borosilicate glass. They have chemical resistance, high strength and resistance to intensive use.

The Bunsen flask 1-5000 with PrimeLab tube is made of durable laboratory glass, resistant to mechanical stress and intensive use. It has a conical shape with a wide base and a narrow neck, as well as a side tube (diameter 11 mm). The height of the entire product is 37 centimeters. Holds up to 5 liters of any reagent. To use, just put a plug on the neck and a vacuum pump hose on the tube.

Vacuum membrane pump PL.HM02.01.8 Primelab is a universal laboratory device, the performance of which can be adjusted for each task separately. Depending on the method of connecting the chambers, its productivity can be 38 l/min and 76 l/min with a maximum residual pressure of 8 and 45 mbar. With independent connection, 38 l/min for each chamber. A carefully thought out security system ensures a long service life of the device. Complies with IP20 protection class. It makes virtually no noise during operation (up to 75 dB), which does not cause discomfort when the pump is constantly running. It has small dimensions (321x140x200 mm), allowing the device to be placed in an already equipped space. Supplied complete with equipment sufficient for quick assembly and operation of the device.

The Tishchenko flask for washing gases through bulk substances produced by the Primelab company is a laboratory container. It has a closed shape with oppositely located branches, at the ends of which there are small olives. Thanks to their presence, the bottle can be reliably and firmly connected to the equipment using a soft hose. There is a partition in the middle that does not reach the end. Flushing of gases is carried out when they pass through granular substances, where unwanted impurities are retained. The Tishchenko bottle is made from high-quality borosilicate glass. It has absolute transparency, which allows you to observe all processes inside the container.

The Primelab company accepts orders for the manufacture of laboratory glassware and instruments of various shapes, including according to the customer’s technical specifications. Heat-resistant glass is used in this work. The Reberg high-speed absorber is designed for titration, impurity collection, gas purification and more. Made from high-grade chemical-resistant glass, which has a long service life and resistance to wear. The device is U-shaped. At the end of one side there is a spherical part, the neck of which is closed during the process with a suitable stopper. The second end has a standard shape. Quite easy to use and compatible with various equipment. It is especially effective when connecting several devices in series with each other using a rubber hose.