Primelab

Conical flask KN-1-100-29/32 with Primelab divisions is intended for laboratory processes. Designed to work with liquid substances whose volume does not exceed 100 ml. For accurate measurements, a measuring scale is applied to the wall. The flask is made of heat-resistant glass in an easy-to-use form with a stable base. A grinding joint is provided with which the flask is securely attached to the equipment. Characteristics: • Base diameter - 64 mm • Section size - 29/32 • Height - 105 mm.

The Schlenk filter / Schlenk flask PrimeLab is a reliable laboratory instrument consisting of 3 components. Manufactured by PrimeLab from durable borosilicate glass, which provides thermal and chemical resistance. Suitable for high temperature applications. Fairly easy to use and install. Used in chemical reactions to isolate contents from air. Schlenk filter / Schlenk flask can be ordered from Primelab, whose range of services includes the production of high-quality laboratory glassware made of borosilicate glass.

Vacuum membrane pump PL.HM02.01.8 Primelab is a universal laboratory device, the performance of which can be adjusted for each task separately. Depending on the method of connecting the chambers, its productivity can be 38 l/min and 76 l/min with a maximum residual pressure of 8 and 45 mbar. With independent connection, 38 l/min for each chamber. A carefully thought out security system ensures a long service life of the device. Complies with IP20 protection class. It makes virtually no noise during operation (up to 75 dB), which does not cause discomfort when the pump is constantly running. It has small dimensions (321x140x200 mm), allowing the device to be placed in an already equipped space. Supplied complete with equipment sufficient for quick assembly and operation of the device.

Threaded evaporator GL14 PrimeLab is a convenient laboratory device designed for working with liquid evaporations. A GL14 thread is provided, thanks to which the evaporator can be firmly attached to laboratory equipment or other installation elements. There are tubes on the top and sides. The threaded evaporator was manufactured by Primelab, which provides glassblowing services. We accept orders for the production of various products from borosilicate glass in a short time according to customer parameters.

The Primelab installation has the following equipment: Three double-walled glass hydrometer cylinders with glass or Teflon stopcocks (available in two versions); Rack with clamps for three cylinders; Glass manifolds for three cylinders – 2 pcs.; PTFE cover for the cylinder – 3 pcs; Silicone tubes 1 meter – 2 pcs. At the bottom of each cylinder there is a tap that allows you to rinse the container from the previous sample without disassembling the installation for a quick transition to the analysis of the next product. It is possible to supply additional cylinders and a circulation thermostat. A liquid thermostat will be selected upon request. The installation equally accurately determines the density of light and dark products, including gasoline, crude oil, diesel fuel, etc. Specifications: Number of cylinders assembled – 3 The height and volume of each cylinder is 350 mm x 750 ml Measurement temperature – from -5 to 100°С Temperature maintenance accuracy - 0.1°C Tripod base size – 300 mm x 300 mm Tripod height – 700 mm The weight of the installation without glass cylinders is 10 kg. Installation benefits The Primelab petroleum product density measurement unit has a number of advantages. Among the main and significant ones are the following: Removable stainless steel tray; All glass elements are made of Simax borosilicate glass; Wide operating temperature range; The hydrometer is visible along the entire length of the glass cylinders; Removable stainless steel tray; PTFE covers; The small size of the installation allows it to be placed in almost any area. Characteristics Country Russia Volume, ml: 750 (each cylinder) Height, mm: 350 (each cylinder) Compliance: GOST 3900-85, ASTM D1298 Accuracy: up to 0.1°C Version: floor, tabletop Temperature measurement range, °C: -5 to +100 Dimensions: base - 300x300 mm, height - 700 mm Device weight, kg: 10 (without cylinders) Unique opportunity: custom manufacturing of a Primelab installation for determining the density of petroleum products to meet specific customer requirements.

Refrigerator KhSh-1-400 29/32 Primelab is a small laboratory accessory designed for cooling vapors and reagents. Inside it there are small balls along which vapors move and cool due to energy loss. Additional cooling can be achieved by running running water over the jacket. The design of the refrigerator includes a core section (29/32), thanks to which it can be connected to laboratory equipment. Its total length is 56 cm with a working part length of 40 cm.

The jar for reagents, dark glass PrimeLab, 10000 ml is equipped with a lid that closes firmly thanks to the GL45 thread on the neck of the container. Protects against leakage and evaporation. The wall has an area for notes and a measuring scale for quickly determining the volume of contents. Characteristics: • Volume – 10000 ml • Height – 410 mm • Diameter – 234 mm • Thread - GL45.

Flask KN-2-1000-42 PrimeLab is an indispensable laboratory accessory used for heating, cooling, mixing, storage and other laboratory processes. Made from heat-resistant laboratory glass, resistant to high temperatures and chemically active substances. The transparency of the glass makes it possible to observe all the processes occurring inside the flask. Characteristics: • Height - 220 mm • Base diameter - 131 mm • Neck diameter - 42 mm • Volume - 1000 ml.

The light glass reagent jar is designed to work with any amount of substance up to 20,000 ml. The package includes a cover. The jar itself has a capacity scale for quickly determining the volume of contents. Designed for reusable use with the possibility of sterilization. Characteristics: • Volume – 20 l • Height – 505 mm • Diameter – 299 mm • Thread - GL45.

Petri dish PrimeLab 120 mm, glass - a small laboratory container with a small edge around the perimeter, made of tempered glass. Consists of two parts with the following features: • The diameter of the upper part is 129 mm with 120 mm of the lower part. • The height of the upper part is slightly lower than the height of the lower part, due to which the upper “lid” fits freely onto the base to protect the contents from the external environment and other microorganisms. • Glass thickness is 2 mm.

The PrimeLab light glass reagent jar, 250 ml, is designed taking into account the requirements of safety and ease of use. Comes complete with a lid that screws onto the neck thanks to a GL45 thread. Prevents the penetration of external substances into stored reagents. Characteristics: • Volume – 250 ml • Height –138 mm • Diameter – 70 mm.

A jar for reagents made of light glass PrimeLab, 2000 ml - a sought-after item for work in laboratories, pharmacies and various industries. Suitable for bulk, liquid, volatile, chemically active and other substances. Made of durable glass, has a long service life. Characteristics: • Volume – 2000 ml • Height – 260 mm • Diameter – 136 mm • Thread - GL45.