Primelab

The vacuum membrane pump PL.HM02.01.4 is a universal device made in Russia from the Primelab company. Made from high-quality materials, including fluoroplastic, used to create sealed chambers, and a protective coating for safe operation of the device. The technical characteristics of the pump depend on the method of connecting the chambers. With a series connection, the performance will be 38 l/min at a maximum vacuum of 4 mbar. Parallel and independent connections will allow you to achieve completely different performance indicators of the device. The vacuum diaphragm pump PL.HM02.01.4 Primelab is convenient to use. It has a light weight of 9 kg, compact dimensions (321.5x160x200 mm) and creates a minimum of noise (up to 75 dB).

The KN-2-50-22 flask is produced by the Primelab company from heat-resistant glass that can withstand temperature changes. It can store reagents, heat, cool, mix and carry out other laboratory processes. Characteristics of the conical flask: • Volume - 50 ml • Base diameter - 51 mm • Neck diameter - 22 mm • Height - 90 mm. Thanks to the wide base, it is extremely difficult to tip the flask over.

Glass chromatograph tubes from PrimeLab are made of borosilicate glass. Resistant to mechanical damage, thermal and chemical influences. They have absolute smoothness and perfect transparency, which makes them an excellent solution for working in chromatography. The Primelab company manufactures glass tubes for chromatographs from borosilicate glass to order. The size and diameter of the product depends on customer requirements.

Characteristics Minimum cooling temperature -120 °C Speed range, rpm 60-600 Nutrition 220 V Heater power, W 3000 (bath heating) Volume, l 20 Vacuum, MPa 0.098 Material stirrer head: stainless steel coated with PTFE 12 mm Engine power, W 90, 3:1 gear motor Maximum plate heating temperature, °C up to +200 °С

The flat-bottomed flask P-2-300-29 Primelab is made of light heat-resistant glass, which provides an overview of the processes occurring inside the product. Holds up to 300 ml of any substance with a ball diameter of 95 mm and a neck of 29 mm. The height of the entire product is 140 mm. Suitable for placement on any flat surface without an additional stand, while maintaining all the advantages of the spherical shape.

Основные характеристики Диапазон измерения температуры, °С От -70 до + 200 Погрешность измерения температуры, °С, не более 1 Номинальное сопротивление при 25 С,кОм 1.0 Длина рабочей части PT 1000 (погружной) 250 мм Длина ручки 50 мм, диаметр ручки М12 Длина провода до 600 мм

Characteristics Maximum heating temperature, °C up to +200 °С Minimum cooling temperature -120 °C Speed range, rpm 60-600 Shaft diameter, mm 14 Nutrition 220 V Heater power, W 9000 (bath heating) Volume, l 150 Vacuum, MPa 0.098 Material stirrer head: stainless steel with PTFE coating Engine power, W 90, 3:1 gear motor

Reagent jar, light glass Primelab, 10000 ml is designed taking into account the requirements of safety, ease of use and all the nuances of working with reagents of different consistency. These are liquid, volatile, loose, chemically active acids and others. Thanks to the transparency of the glass, it is possible to observe all processes inside the jar in real time without opening the lid and excluding the impact of the external environment on the contents. Specifications: • Volume – 10000 ml • Height – 410 mm • Diameter – 234 mm • Thread - GL45.

A 30 ml dark glass reagent bottle with a narrow neck and a ground-in stopper is a reliable means for storing and transporting reagents, the volume of which does not exceed 30 ml. The existing plug creates an absolute seal and protects the contents from external influences and evaporation leakage. Made from borosilicate glass 3.3. Characteristics: • Volume – 30 ml • Base diameter – 40 mm • Throat diameter – 18 mm • Height – 76 mm.

The Schlenk filter / Schlenk flask PrimeLab is a reliable laboratory instrument consisting of 3 components. Manufactured by PrimeLab from durable borosilicate glass, which provides thermal and chemical resistance. Suitable for high temperature applications. Fairly easy to use and install. Used in chemical reactions to isolate contents from air. Schlenk filter / Schlenk flask can be ordered from Primelab, whose range of services includes the production of high-quality laboratory glassware made of borosilicate glass.

The flat-bottomed flask P-2-500-50 Primelab has a spherical shape with a flat bottom. Designed for evaporation, filtration, distillation, synthesis and other laboratory processes. Made of borosilicate glass 3.3, resistant to temperature changes. Suitable for working with chemically active and toxic substances of varying consistency. Sterilization in an autoclave and other methods at high temperatures is possible. The flask is designed for 500 ml with a height of 170 mm. The neck diameter is 50 mm with a ball diameter of 105 mm.