Livam

The tank for the 2.4 kW aquadistillator is made of stainless steel.

Designed for collecting, storing and distributing purified water obtained by various purification methods, with a capacity of 300 liters and 100% stainless steel, which allowed for a long service life. Dimensions in terms of 805x780 mm Weight 31 kg

The UPVD deionizer is suitable for enterprises, research centers and laboratories where type 2 water is required for laboratory analysis with an electrical conductivity of no more than 1.0 mcm/cm. Overall dimensions (LxWxH) 550×290×460 mm Weight 21 kg

The tank for the 2.0 kW aquadistillator is made of stainless steel.

Purpose: obtaining distilled water of type 2 according to GOST R 58144-2018 "Distilled water", FS.2.2.0019.18 "Water for injection" Capacity: distillate: 2.6 (-10%) l/h, bidistillate: 2.0 (-10%) l/h Heating elements: 1st stage of distillation: Heating element 2.0 kW 220V (stainless steel) – 1 pc., 2nd stage of distillation: Heating element 1.3 kW 220V (stainless steel) – 1 pc. The quality of the produced water: GOST R 58144-2018 "Distilled water", FS.2.2.0019.18 "Water for injection" Type of current, frequency, voltage: alternating, single-phase, 50 Hz, 220 V Power consumption: in distillate production mode: 2.0 kW, in bidistillate production mode: 3.3 kW Overall dimensions (L×W×C), mm: 470×280×300 Weight: 14.5 kg Warranty period: 12 months from the date of sale Electrical conductivity of the produced water: bidistillate: 1.0-1.2 microns/cm, distillate: no more than 5.0 microns/cm The temperature of the produced water: distillate: from 70 to 85 ° C, bidistillate: no more than 40 ° C Source water consumption (at t of water 10 ° C) in the distillate production mode: 20 (±10%) l/h, in the bidistillate production mode: 44 (±10%) l/h Source water pressure: 0.1-0.4 MPa Version: desktop with adjustable supports, Wall mounting is possible Coefficient of water purification from radionuclides: at least 4000 Service life: at least 8 years

Capacity, l/h 5.0 (-10%) Purpose preparation of distilled water of type 2 according to GOST 52501-2005 "Water for laboratory analysis" FS.2.2.0019.18 "Water for injection" Heating elements Heating element 3.5 kW 220V (stainless steel) – 1 pc. The quality of the produced water GOST 52501-2005 "Water for laboratory analysis", FS.2.2.0019.18 "Water for injection" Type of current, frequency, voltage alternating single-phase, 50 Hz, 220 V Power consumption, kW 3,6 Overall dimensions (L×W×C), mm 424x417x454 Weight, kg 20,0

Allows you to accumulate 100 liters of injection water. It is equipped with a heating and recirculation system, a temperature control meter, as well as special air bactericidal filters through which contact with the atmosphere is carried out. The automation system regulates the operation of the pump and heating elements and provides automatic shutdown of the distiller when filling the tank. It consists of 100% stainless steel, which allowed for a long service life. Overall dimensions (LxWxH) 1200×585×1120 mm Weight 55 kg

Designed for collecting, storing and distributing purified water obtained by various purification methods, with a capacity of 500 liters and 100% stainless steel, which allowed for a long service life. Dimensions in terms of 805x780 mm Weight 48 kg

The tank for the 1.8 kW aquadistillator is made of stainless steel

The tank for the 2.7 kW aquadistillator is made of stainless steel.

The distillate cooler is installed directly on the body of the aquadistillator and provides cooling of the finished distillate from 80 ° C to 40 ° C.

The tank for the 1.3 kW aquadistillator is made of stainless steel.