Equipment

The LP-800 flow-through water trap is installed on the inlet flange of the diffusion pump and is designed to reduce the flow of working fluid vapors into the pumped volume by condensing them on the cooled elements of the freezing device.

Measurement of dissolved oxygen concentration (CRC) and temperature of aqueous media. Laboratory and "field" measurements. Definition of BOD. The sensor is designed specifically for BOD measurement according to the PNF F method 14.1:2:3:4.123-97. 24-month warranty for deliveries across the Russian Federation Convenience and accuracy of measurement | Automatic temperature and barocompensation. Automatic air oxygen calibration. IP65 | Compact sealed device is reliably protected from dust and moisture. Electronic notebook | The ability to record up to 500 measurement groups in User-named folders. USB port, software | The ability to create and manage a data archive on a PC. Graphic indicator with backlight | Indication of readings in a user-friendly format, ease of settings. Easy calibration by air | Minimum maintenance | Replacement of the membrane no more than once a year. Storage of the sensor in the air. Long-lasting sensor | Sensor service life of at least 10 years.Time to failure - 40,000 hours Low power consumption | Up to 600 hours of continuous operation from a set of AA elements. Designed for "field" measurements | Measurement of the KRK at a depth of up to 20 meters. Self-diagnosis | Additional guarantee of correct operation of the device

Technical specifications: Temperature range, °C without external cooling (Current+10)...+100 with tap water cooling (Tvody+5)...+100 Accuracy of temperature maintenance, no more than, ° C ± 0.1 Power consumption, max., W 2200 Power supply 220±20 V, 50 Hz Working fluid water, water-glycerin mixture Dimensions of the working part of the bath / depth, mm 190x296 / 150 Overall dimensions, mm 355x335x350 Bath volume, l 12 Weight, kg 11.9

Capacity, m3/h 100 Bactericidal efficiency, % 99.9 Total power of ultraviolet radiation of bactericidal lamps, W, not less 14.4 Service life of UV lamps, hours 9000 Power consumption, W, 62±10 Adjusted sound power level, no more than 40 dBA Bactericidal UV light lamp LUV 15W, with a power of 15W 3 pcs Dimensions (H*W*D), mm 886*366*163 Weight, kg, no more 7 Warranty, years 2 Approximate dimensions of the product with packaging Net weight of the product, kg 7 Gross weight of the product, kg 7,8 Volume of packaging, m3 0.068 Length of the package, m 0.92 Width of the package, m 0,41 The height of the package, m 0.18

The trace searching kit is designed to accurately determine the location and depth of underground utilities (power and signal cable lines, reinforced fiber-optic lines, pipelines made of electrically conductive materials), troubleshooting cable lines, and also allows you to conduct a survey of the area in the shortest possible time and with great reliability before excavation and to prevent damage to engineering communications. The kit includes a digital multifunctional tracking receiver with a large LCD display and audio output both to the built-in speaker and to the operator's headphones. Compact stand-alone generator with display and built-in induction antenna. The output power of the generator is up to 20 watts and the operating range is up to 3 km. Connection to the desired route is possible both by contact and contactless method.

The operating temperature range is +40...+200 °C. Stability and uniformity of temperature in the working bath is not worse than ± 0.01 °C Bath volume 14 l Overall dimensions 360x360x900 mm The open part of the bath is 90 mm Bath depth 520 mm Weight 35 kg Power consumption 2.2 kW

Technical characteristics: NIP, G150 Discreteness, g0,001 External calibration The size of the scale bowl / platform, mm116 The smallest weighing limit, g0.02 The price of the verification scale division, mg10 The limits of the permissible error during the initial verification, mgot 0.02g to 50 g incl. ±5; sv. 50g to 150g incl. ±10 in accordance with GOST OIML R 76-1-2011 Accuracy class according to GOST OIML R 76-1-2011II is high The setting the readings, s, no more than ~3 Weight adjustment 100gF1* 7 years warranty

The LOIP LT-112a modification device consists of an immersion thermostat-circulator LOIP LT-100 and a working bath with a flat removable lid. Design features: The LOIP ATC intelligent control system adapts the parameters of the PID controller to the type of working fluid and eliminates the influence of instability of the mains voltage and air temperature on the operation of the system. A productive discharge pump ensures efficient mixing of the coolant inside the bath and high accuracy of maintaining the temperature of an external object with a closed circuit. A bright LED digital display displaying the current and set temperature with a discreteness of 0.1 °C. Multifunctional control knob. Simple correction of the internal temperature sensor readings with the possibility of calibration by two points. A cooling coil connected to the water supply to reach temperatures below room temperature (installed on request, not included as standard). Self-diagnosis system with indication of the causes of malfunctions on the display. A safety device with a sound and light notification that provides automatic shutdown of heating in the event of a break in the temperature sensor circuit, as well as when the coolant level drops below the permissible level. Stainless steel working baths, made by stamping, are characterized by a long service life and ease of cleaning. The external body of the bath is made of powder-coated steel and is reliably insulated from the tank of the bath, which allows the operator to work safely with the equipment even at high temperature of the working fluid. Technical specifications: Temperature range: without external cooling, °C Current +10 ... +100 with tap water cooling °C Tvods+5 ...+100 Accuracy of temperature maintenance, °C ± 0.1 The error of setting the set temperature, no more than ° C ± 0.2 Heater power, W 1900 Pump: max. flow rate, l/min 7.5 pressure, 0.17 bar Bath volume, l 12 The working fluid is water, water-glycerin mixture. Open part of the bath / depth, mm 190x296/150 Overall dimensions, mm 355x335x370 Weight, kg 10.2

It is designed to maintain temperature when determining the kinematic viscosity of petroleum products with glass viscometers in accordance with GOST 33, GOST R 53708, ASTM D445, IP 71, ISO 3104 and DIN 51366 and when determining the pour point of petroleum products in accordance with GOST 20287. Operating temperature range -30...+50 °C Four places for glass viscometers or a basket for determining the pour point of petroleum products. Stability and uniformity of temperature in the working bath is not worse than ± 0.01 ° C. Bath volume 15 l Overall dimensions 440x710x620 mm The open part of the bath is 140x170 mm Bath depth 320 mm The size of the viewing window is 104x270 mm Weight 56 kg Power consumption 3.5 kW

DPSS lasers of the KLM-415/x series are optimal sources of coherent radiation for the construction of control and automation systems, alignment and marking devices, for scientific and medical purposes. Technical specifications Radiation output power: up to 10W Radiation wavelength: 415 nm Output beam diameter: 1.5mm Divergence of the radiation beam: 1.3 mrad Instability of radiation power: 5% Type of modulation: TTL or analog Time to enter the mode: 15min Spectral line width: 0.1nm

Designation VCHV-15 Cooling capacity at Two.water= +15C, Tcond=+45C, Current.cp.=+30C, kW 15 Required pump capacity, m3/h 3.3 Pressure loss in the heat exchanger, kRa 65

Design features: Durable ceramic muffle; Closed heaters on four sides of the chamber; Microprocessor temperature controller; Conveniently located control panel and bright LED display; Ease of management and control; LED indicators of heater operation and protection operation; Automatic shutdown of heating when opening the door; Alarm when the current temperature exceeds the limits of the permissible range; Highly efficient thermal insulation of the housing; The furnace body is made of high-quality sheet steel and painted with heat-resistant powder paint. Technical specifications: Maximum heating temperature, °C +1100 Temperature stability in steady-state thermal mode, °C ± 10 Warm-up time to maximum temperature, no more than 120 min Dimensions of the working chamber, WxHxD, not less than 120x97x195 mm Overall dimensions, WxHxD, not more than 400x535x510 mm Rated supply voltage, 220 V Rated power, W 2200