Equipment

Measurement of hydrogen ion activity (pH) and temperature of aqueous media. pH control of water media in technological processes, including treatment facilities. Two channels Freely programmable measurement ranges. The possibility of independent measurements at two points. Convenience and accuracy of measurement, minimum maintenance | Calibration according to standard buffer solutions with their automatic determination. Universal trunk-submersible "active" sensor unit | The digital communication channel of the sensor with the converter unit is up to 100 meters. Communication with external devices | Galvanically isolated current outputs 0-5/4-20/0-20 Ma. RS 485 port. MODBUS RTU exchange protocol. Programmable setpoints with a "dry contact" type output. Durable aluminum housing IP65 | The device is reliably protected from dust and moisture. Graphic indicator with backlight | Convenient data presentation format and ease of settings

Design features: Programmable microprocessor temperature controller; Three programs of ten steps with the ability to set temperature, temperature change rates and exposure time; Manual heating mode with timer with sound notification; Reliable and stable Pt 100 temperature sensor; Four-sided heating; Forced air circulation in the working chamber; Camera material – stainless steel; Backlit graphic display; Conveniently located control panel; Sound and light alarm when the current temperature exceeds the limits of the permissible interval; Independent overheating protection circuit with separate temperature sensor; Reliable door closing mechanism; High-quality silicone sealer; Highly efficient thermal insulation of the housing; The case is made of high-quality sheet steel and painted with heat-resistant powder paint; Number of shelves: standard – 1, maximum – 5. Technical specifications: Maximum heating temperature, °C +350 The error of reproducing the set temperature ° C ± 3 Temperature maintenance error, ° C ± 1 Warm-up time to maximum temperature, no more, min 45 Dimensions of the working chamber, (WxHxD), not less than 250x275x250 mm Overall dimensions, (WxHxD), not more than 595x495x565 mm Rated supply voltage, 220 V Rated power, W 1200

The electric vacuum drying cabinet SHSV-65/3.5 is designed for drying and heating various materials in air and in vacuum at a maximum temperature of 350 ° C. In the model with the index "C", the door is made of heat- resistant glass. Technical specifications The electric cabinet operates at ambient temperature from 10 to 35 ° C and relative humidity up to 80% at 25 ° C Operating temperature- 350 ⁰C Power consumption - 2500 W Dimensions of the working chamber-Ø430x430 mm Dimensions WxDxH- 620x950x670 mm Weight - 90* kg (* - mass with microprocessor unit and pump)

The TAN-1 potentiometric pH meter analyzer is a representative of a new generation of pH meters with a touch control panel. It is designed to measure pH and redox potential (Eh) with simultaneous temperature measurement.

Technical specifications: Type of motion orbital Platform rotation speed, min-1 40-300 The amplitude of rotation of the platform, mm 30 Maximum load on the platform, kg 20 Timer (time is displayed in h, min, s) 0...8 hours Power consumption, W 200 Platform size, mm 445x305 Overall dimensions, mm 525x510x225 Weight, kg 32

The electric drying cabinet SHS-40/3.5-M is designed for drying, heating various materials in an air environment at a maximum temperature of 350 ° C. Technical specifications The electric cabinet operates at ambient temperature from 10 to 35 ° C and relative humidity up to 80% at 25 ° C. Operating temperature- 350 ⁰C Power consumption - 2200 W Dimensions of the working chamber WxDxH- 390x360x390 mm Dimensions WxDxH- 600x740x580 mm Weight - 70 kg

The electric drying cabinet SHS-40/5.0 is designed for drying, heating various materials in air environment at a maximum temperature of 500 ° C. Technical specifications The electric cabinet operates at ambient temperature from 10 to 35 ° C and relative humidity up to 80% at 25 ° C. Operating temperature- 500 ⁰C Power consumption - 2500 W Dimensions of the working chamber WxDxH- 390x360x39 mm Dimensions WxDxH- 600x640x59 mm Weight - 67 kg

The electric drying vacuum compression cabinet SNVS-4,5.4,0/2-I2PD (autoclave) is designed for drying and heating various materials in an air environment, in vacuum, under pressure up to 1.5 atm. and in an inert gas environment at temperatures up to 250 oC.

Distillers of the company "BELAKVILON" are designed to produce distilled water from tap water. 3 — 3.5 l/h Dimensions (mm), W x D x H 410 x 335 x 490 Heater 3.0 kW Cooling water consumption, l/h about 30 — 50 l/h Power supply 230 V ±10%, 50 Hz Switch Differential automatic Water level sensors Reed floats