The viscometer works under the control of a PC (Laptop). In the dialog mode, the operator sets the parameters necessary for testing liquids.
The test results are displayed on a PC display, stored in a database and can be printed on a printer.

Technical specifications

The range of viscosity determination is from 0 to 1000 MPa ×s.
The limits of the permissible relative error in determining the viscosity under normal conditions are 1%.
The rotational speed of the measuring nozzle is from 0.1 to 900 rpm.
The range of temperature control and determination of the temperature of the tested solutions under normal conditions is from 10 to 50 ° C.
The limit of permissible absolute error of temperature control and temperature determination ± 2 °C.
Normal operating conditions under which metrological and reliability parameters are normalized:
type of current – alternating single-phase;
supply voltage – (220 ± 22) V;
ambient temperature – from +15 to +25 ° C;
AC frequency – (50± 1) Hz;
power consumption – no more than 240 VA.
Operating conditions under which the additional error in determining the viscosity increases by ½ of the main one:
ambient temperature – from +10 to +35 ° C;
The electrical insulation resistance between the electrical circuits and the housing at ambient temperature (20 ± 5) ° C and relative humidity (80 ± 3)% is not less than 20 mOhm.
The electrical insulation between the electrical circuits and the housing under the conditions of clause 2.8 must withstand an alternating current voltage of 1.5 kV of a sinusoidal shape with a frequency of 50 Hz.
Overall dimensions of the viscometer, no more than 160x300x340mm.
The average service life is at least 10 years.
The mass of the viscometer is no more than 12 kg.

Electronic milk viscometer "Expert Somatos - 02"

from 69 000 ₽

1 supp.

Exclusive benefits: • version with one or two flasks, which allows up to 60 measurements per hour • optionally equipped with an integrated or external printer • * thanks to the new verification method developed from a blank sheet, it can be checked at any standardization and metrology center As a rule, it is used: • Dairy farms — for the timely prevention and treatment of mastitis in cows, which ensures stable supplies of high-grade milk (accordingly increases the cost of products). • Veterinary laboratories, SBBS, points for receiving farm milk from the population to determine the grade and calculate the cost of raw milk. • In the laboratories of milk processing enterprises to control incoming raw milk.

LABORATORIKA

Krasnoobsk

chemical analysis

ultrasound

measuring equipment (except for electro- and chemistry)