Catalog
Back to search results
Yellow DPSS Laser 593 nm KLM-593-x
Back to search results
Yellow DPSS Laser 593 nm KLM-593-x
DPSS lasers of the KLM-593/x series are diode-pumped solid-state lasers of the visible spectral range (593 nm) with collimated continuous radiation of low and high power (depending on the model).
The package includes: a laser head, a power supply, a set of connecting wires, a power cable and a device passport.
Depending on the tasks, the following options are available for each laser model:
the presence of TTL modulation / the presence of analog modulation,
power control via the power supply,
the presence of a display for the power supply,
improved power instability (<3% / <1%),
improved temporary power instability (4 h / 8 h),
radiation sweep in-line (5...120°),
laser head with fiber output (FC/SMA),
extended warranty period,
custom housing development.
These lasers are widely used in medical equipment, for control and automation of technological processes, in scientific research, astronomy, spectroscopy. They are optimal sources of coherent radiation for the construction of systems of alignment and marking devices.
The package includes: a laser head, a power supply, a set of connecting wires, a power cable and a device passport.
Depending on the tasks, the following options are available for each laser model:
the presence of TTL modulation / the presence of analog modulation,
power control via the power supply,
the presence of a display for the power supply,
improved power instability (<3% / <1%),
improved temporary power instability (4 h / 8 h),
radiation sweep in-line (5...120°),
laser head with fiber output (FC/SMA),
extended warranty period,
custom housing development.
These lasers are widely used in medical equipment, for control and automation of technological processes, in scientific research, astronomy, spectroscopy. They are optimal sources of coherent radiation for the construction of systems of alignment and marking devices.
Blue DPSS Laser 455 nm KLM-455-x
DPSS lasers of the KLM-455/x series are optimal sources of coherent radiation for the construction of control and automation systems, alignment and marking devices, for scientific and medical purposes.
Technical specifications
Radiation output power: up to 120W
Radiation wavelength: 455 nm
Output diameter of the radiation beam: 1.5 mm
Divergence of the radiation beam: 1.3 mrad
Instability of radiation power: 5%
Type of modulation: TTL or analog
Time to enter the mode: 15min
Spectral line width: 0.1nm
FTI-Optronik
Saint Petersburg
Produced in: Saint Petersburg
Green Laser Module KLM-A532-15-5 532nm 15mW dot
from
20 854 ₽
KLM-A532-15-5 laser modules are optimal sources of coherent radiation for the construction of control and automation systems, alignment and marking devices, for scientific and medical purposes.
FTI-Optronik
Saint Petersburg
Produced in: Saint Petersburg
Blue DPSS Laser 470 nm KLM-470-x
DPSS lasers of the KLM-470/x series are optimal sources of coherent radiation for the construction of control and automation systems, alignment and marking devices, for scientific and medical purposes.
Technical specifications
Radiation output power: up to 20W
Radiation wavelength: 470 nm
Output beam diameter: 1.5mm
Divergence of the radiation beam: 1.3 mrad
Instability of radiation power: 5%
Type of modulation: TTL or analog
Time to enter the mode: 15min
Spectral line width: 0.1nm
FTI-Optronik
Saint Petersburg
Produced in: Saint Petersburg
Blue DPSS Laser 465 nm KLM-465-x
DPSS lasers of the KLM-465/x series are optimal sources of coherent radiation for the construction of control and automation systems, alignment and marking devices, for scientific and medical purposes.
Technical specifications
Radiation output power: up to 15 W
Radiation wavelength: 465 nm
Output beam diameter: 1.5mm
Divergence of the radiation beam: 1.3 mrad
Instability of radiation power: 5%
Type of modulation: TTL or analog
Time to enter the mode: 15min
Spectral line width: 0.1nm
FTI-Optronik
Saint Petersburg
Produced in: Saint Petersburg
Green Laser Module LG-D532-x-5 532nm line
from
11 026 ₽
The generators of the LG-D532-x-5 series are optimal sources of coherent radiation for the construction of control and automation systems, alignment and marking devices, for scientific and medical purposes.
FTI-Optronik
Saint Petersburg
Produced in: Saint Petersburg
Blue DPSS Laser 473 nm KLM-473/h-x
DPSS lasers of the KLM-473/x series are optimal sources of coherent radiation for the construction of control and automation systems, alignment and marking devices, for scientific and medical purposes.
FTI-Optronik
Saint Petersburg
Produced in: Saint Petersburg
Red Laser Module KLM-M650-40-5 650nm 40mw with Modulation
from
17 259 ₽
KLM-M650-40-5 laser modules are optimal sources of coherent radiation for the construction of control and automation systems, alignment and marking devices, for scientific and medical purposes.
FTI-Optronik
Saint Petersburg
Produced in: Saint Petersburg
Copper vapor laser device for selective photodestruction of vascular and pigmented defects of the skin and mucous membranes "Yakhroma-Med"
Laser medical device "Yakhroma-Med" using copper vapor for microsurgical operations in the field of dermatology, cosmetology, gynecology, oncology and ophthalmology. The devices are used in 100 medical institutions in the Russian Federation, CIS countries and the Kingdom of Thailand.
FIAN
Moscow
Produced in: Moscow
Green DPSS Laser 522 nm KLM-522-x
DPSS lasers of the KLM-522/x series are optimal sources of coherent radiation for the construction of control and automation systems, alignment and marking devices, for scientific and medical purposes.
FTI-Optronik
Saint Petersburg
Produced in: Saint Petersburg
Blue DPSS Laser 445nm KLM-445-x
DPSS lasers of the KLM-445/x series are optimal sources of coherent radiation for the construction of control and automation systems, alignment and marking devices, for scientific and medical purposes.
Technical specifications
Radiation output power: up to 120W
Radiation wavelength: 445 nm
Output beam diameter: 1.5mm
Divergence of the radiation beam: 1.3 mrad
Instability of radiation power: 5%
Type of modulation: TTL or analog
Time to enter the mode: 15min
Spectral line width: 0.1nm
FTI-Optronik
Saint Petersburg
Produced in: Saint Petersburg
Highly coherent tunable diode lasers with an external resonator
Highly coherent tunable diode lasers with an external resonator are used in projects related to the development of optical frequency standards (on ytterbium and thorium ions), in studies of degenerate gases, Rydberg atoms.
FIAN
Moscow
Produced in: Moscow
Red Laser Module KLM-C635-5-5 635nm 5mW Cross
from
4 314 ₽
KLM-C635-5-5 laser modules are optimal sources of coherent radiation for the construction of control and automation systems, alignment and marking devices, for scientific and medical purposes.
FTI-Optronik
Saint Petersburg
Produced in: Saint Petersburg
Green DPSS Laser 532 nm KLM-532/SLN-x
DPSS lasers of the KLM-532/SLN-x series are optimal sources of coherent radiation for the construction of control and automation systems, alignment and marking devices, for scientific and medical purposes.
FTI-Optronik
Saint Petersburg
Produced in: Saint Petersburg
Red Laser Module KLM-M650-4-5 650nm 4MW with Modulation
from
3 116 ₽
KLM-M650-4-5 laser modules are optimal sources of coherent radiation for the construction of control and automation systems, alignment and marking devices, for scientific and medical purposes.
FTI-Optronik
Saint Petersburg
Produced in: Saint Petersburg
Infrared Laser 980 nm KLM-980-x
CDL lasers of the KLM-980 series are optimal sources of continuous radiation for the construction of control and automation systems, for scientific and medical purposes.
FTI-Optronik
Saint Petersburg
Produced in: Saint Petersburg
Blue DPSS Laser 455 nm KLM-455-x
DPSS lasers of the KLM-455/x series are optimal sources of coherent radiation for the construction of control and automation systems, alignment and marking devices, for scientific and medical purposes.
Technical specifications
Radiation output power: up to 120W
Radiation wavelength: 455 nm
Output diameter of the radiation beam: 1.5 mm
Divergence of the radiation beam: 1.3 mrad
Instability of radiation power: 5%
Type of modulation: TTL or analog
Time to enter the mode: 15min
Spectral line width: 0.1nm
FTI-Optronik
Saint Petersburg
Produced in: Saint Petersburg
Green Laser Module KLM-A532-15-5 532nm 15mW dot
from
20 854 ₽
KLM-A532-15-5 laser modules are optimal sources of coherent radiation for the construction of control and automation systems, alignment and marking devices, for scientific and medical purposes.
FTI-Optronik
Saint Petersburg
Produced in: Saint Petersburg
Blue DPSS Laser 470 nm KLM-470-x
DPSS lasers of the KLM-470/x series are optimal sources of coherent radiation for the construction of control and automation systems, alignment and marking devices, for scientific and medical purposes.
Technical specifications
Radiation output power: up to 20W
Radiation wavelength: 470 nm
Output beam diameter: 1.5mm
Divergence of the radiation beam: 1.3 mrad
Instability of radiation power: 5%
Type of modulation: TTL or analog
Time to enter the mode: 15min
Spectral line width: 0.1nm
FTI-Optronik
Saint Petersburg
Produced in: Saint Petersburg
Blue DPSS Laser 465 nm KLM-465-x
DPSS lasers of the KLM-465/x series are optimal sources of coherent radiation for the construction of control and automation systems, alignment and marking devices, for scientific and medical purposes.
Technical specifications
Radiation output power: up to 15 W
Radiation wavelength: 465 nm
Output beam diameter: 1.5mm
Divergence of the radiation beam: 1.3 mrad
Instability of radiation power: 5%
Type of modulation: TTL or analog
Time to enter the mode: 15min
Spectral line width: 0.1nm
FTI-Optronik
Saint Petersburg
Produced in: Saint Petersburg
Green Laser Module LG-D532-x-5 532nm line
from
11 026 ₽
The generators of the LG-D532-x-5 series are optimal sources of coherent radiation for the construction of control and automation systems, alignment and marking devices, for scientific and medical purposes.
FTI-Optronik
Saint Petersburg
Produced in: Saint Petersburg
Blue DPSS Laser 473 nm KLM-473/h-x
DPSS lasers of the KLM-473/x series are optimal sources of coherent radiation for the construction of control and automation systems, alignment and marking devices, for scientific and medical purposes.
FTI-Optronik
Saint Petersburg
Produced in: Saint Petersburg
Red Laser Module KLM-M650-40-5 650nm 40mw with Modulation
from
17 259 ₽
KLM-M650-40-5 laser modules are optimal sources of coherent radiation for the construction of control and automation systems, alignment and marking devices, for scientific and medical purposes.
FTI-Optronik
Saint Petersburg
Produced in: Saint Petersburg
Green DPSS Laser 522 nm KLM-522-x
DPSS lasers of the KLM-522/x series are optimal sources of coherent radiation for the construction of control and automation systems, alignment and marking devices, for scientific and medical purposes.
FTI-Optronik
Saint Petersburg
Produced in: Saint Petersburg
Blue DPSS Laser 445nm KLM-445-x
DPSS lasers of the KLM-445/x series are optimal sources of coherent radiation for the construction of control and automation systems, alignment and marking devices, for scientific and medical purposes.
Technical specifications
Radiation output power: up to 120W
Radiation wavelength: 445 nm
Output beam diameter: 1.5mm
Divergence of the radiation beam: 1.3 mrad
Instability of radiation power: 5%
Type of modulation: TTL or analog
Time to enter the mode: 15min
Spectral line width: 0.1nm
FTI-Optronik
Saint Petersburg
Produced in: Saint Petersburg
Red Laser Module KLM-C635-5-5 635nm 5mW Cross
from
4 314 ₽
KLM-C635-5-5 laser modules are optimal sources of coherent radiation for the construction of control and automation systems, alignment and marking devices, for scientific and medical purposes.
FTI-Optronik
Saint Petersburg
Produced in: Saint Petersburg
Green DPSS Laser 532 nm KLM-532/SLN-x
DPSS lasers of the KLM-532/SLN-x series are optimal sources of coherent radiation for the construction of control and automation systems, alignment and marking devices, for scientific and medical purposes.
FTI-Optronik
Saint Petersburg
Produced in: Saint Petersburg
Red Laser Module KLM-M650-4-5 650nm 4MW with Modulation
from
3 116 ₽
KLM-M650-4-5 laser modules are optimal sources of coherent radiation for the construction of control and automation systems, alignment and marking devices, for scientific and medical purposes.
FTI-Optronik
Saint Petersburg
Produced in: Saint Petersburg
IR Laser Module KLM-D980-x-5 980nm
from
4 314 ₽
Laser modules of the KLM-D980-x-5 series are optimal sources of coherent radiation for the construction of control and automation systems, alignment and marking devices, for scientific and medical purposes.
FTI-Optronik
Saint Petersburg
Produced in: Saint Petersburg
Infrared Laser 980 nm KLM-980-x
CDL lasers of the KLM-980 series are optimal sources of continuous radiation for the construction of control and automation systems, for scientific and medical purposes.
FTI-Optronik
Saint Petersburg
Produced in: Saint Petersburg
IR Laser Module KLM-B808-x-5 808nm
from
19 176 ₽
Laser modules of the KLM-B808-x-5 series are optimal sources of coherent radiation for the construction of control and automation systems, alignment and marking devices, for scientific and medical purposes.
FTI-Optronik
Saint Petersburg
Produced in: Saint Petersburg
Red laser module KLM-C635-2-5 635nm 2mw cross
from
3 835 ₽
KLM-C635-2-5 laser modules are optimal sources of coherent radiation for the construction of control and automation systems, alignment and marking devices, for scientific and medical purposes.
FTI-Optronik
Saint Petersburg
Produced in: Saint Petersburg