The set for temperature control during transportation of perishable food and ILP

General monitoring of contamination of various objects with radioactive substances in the counting rate mode, with the possibility of separate measurement of the alpha particle flux density and beta particle flux density, as well as the gamma radiation dose rate A wide range of measurements The possibility of using an extension rod

High sensitivity Sound, light and visual alarm of exceeding the set threshold levels The possibility of using both stationary and wearable versions A wide range of measurements

Technical specifications: Maximum load (torque): 30 N·m Maximum twisting angle: 50000° The discreteness of the twisting angle: 0.01° Twisting angle error: ±0.1° Torque discreteness: 0.001 N·m Relative error of torque measurement: no more than 1% in the measurement range from 0.6 to 30 Nm Torque measurement error: no more than 0.01 N·m in the measurement range from 0 to 0.6 N · m Maximum rotation speed: 10 rpm Weight: 150 kg Overall dimensions (length x width x height): 1000 x 500 x 500 mm Diameter of the universal testing device: 80 mm Maximum spring length: 300 mm or more

A high-precision dosimeter with extensive functionality: measurement of DC power, electric charge, charge by numerical integration of current, kerma and kerma power in the air, kerma by numerical integration of kerma power and other radiological quantities. Composition of the dosimeter: - Electrometric measuring unit (electrometer) - PTW-Freiburg ionization chambers (Germany) to choose from: TM23342 Flat-parallel X-ray (volume 0.02 cm3) TM31010 Cylindrical (volume 0.125 cm3) TM30010 Thimble (volume 0.6 cm3) TM23361 Cylindrical (volume 30 cm3) TM32002 Spherical (volume 1000 cm3)

Measures: - the power of the absorbed dose of gamma radiation in a tissue equivalent substance with radiation thickness of 1 g/cm2; - contamination of surfaces with beta-nuclides (beta radiation flux density): in the energy range from 0.08 to 3.0 MeV in the energy range from 0.3 to 3.0 MeV Measurement of radioactive emissions: - in the measurement ranges of absorbed dose rate: - with the BDZS-10S detection unit; - without the BDZS-10S detection unit; - in the range of measuring the beta radiation flux density with the BDZS-10S detection unit from 10 mkrad/h to 999 rad/h from 10 mrad/h to 999 rad/h 10...999·102 parts/cm2min The meter is resistant to the background of gamma radiation from the 137Cs source when measuring the contamination of surfaces with beta-active substances, depending on the measurement ranges: from 10 to 102 parts/cm2min: absorbed dose rate is no more than 0.1 mrad/h from 102 to 103 parts/cm2min: absorbed dose rate is no more than 1.0 mrad/h from 103 to 104 parts/cm2min: absorbed dose rate is no more than 10.0 mrad/h from 104 to 105 parts/cm2·min: absorbed dose rate is no more than 100 mrad/h Limits of permissible basic error: - when measuring the absorbed dose rate of gamma radiation under normal climatic conditions from a second-class caesium-137 source relative to the measured value with a confidence probability of 0.95: the permissible basic error does not exceed ± 20% (at release) and ± 25% (during operation) - when measuring the absorbed dose rate of gamma radiation from 10 to 100 mrad/h under normal climatic conditions using a second-class caesium-137 source with a measuring console UI-177S without using BDZS-10C relative to the measured value with a confidence probability of 0.95: the permissible basic error does not exceed ± 20% (at release) and ± 25% (during operation) - when measuring the beta radiation flux density under normal climatic conditions from a second-digit strontium-90 + yttrium-90 source relative to the measured value with a confidence probability of 0.95: the permissible basic error does not exceed ± 20% (at release) and ± 25% (during operation) The mass of the meter is no more than 3.76 kg

The smart probe of relative humidity and temperature L=150 mm with a built-in flash memory is designed to measure the temperature of gaseous materials without mechanical impurities and aggressive vapors, relative humidity by direct contact of the probe with the measuring object and transmitting the measured value via Bluetooth to devices with the installed ThermoMonitor based on the Android program. Operating conditions of the SZVL.150P smart probe Ambient temperature, °C: -20...+55. Relative humidity, %: not more than 80 at T=35 °C. Atmospheric pressure, kPa: 86...106. Functionality of the smart probe SSVL.150P Measurement of physical quantities with a resolution of 0.01. Recording of measured values at intervals from 5 seconds to 23 hours 59 minutes 59 seconds (only smart probes with built-in memory). Transmitting data about measured physical quantities via Bluetooth to a device with the ThermoMonitor based on the Android program. Transmitting information about the state of charge of the built-in battery via Bluetooth to a device with the ThermoMonitor based on the Android program. Automatic transition to sleep mode after 50 seconds. The ability to connect an external power supply. Possibility of calibration.

Purpose: measurement of the product of the air kerma by length, followed by the calculation of the CTDI tomographic dose index (using the CTDI phantom) for the following calculation of the effective dose received by the patient; monitoring the stability of medical X-ray machines during their operation; calculation of the dose index of a computer tomograph (MPCT) according to GOST R IEC 61223-2-6-2001.

Purpose: Measurement of temperature, oxygen activity and sampling of molten metal Scope of application: Oxygen converters, electric arc furnaces, induction furnaces, casting buckets Measuring range: from 1 to 2000 ppm O - metal oxidation from 1400 to 1800 °C - metal temperature from 0.010 to 0.200% - carbon content Accuracy: 0 + 3 °C at 1554 °C; (from 5 to 10) mV (depending on the oxygen activity level) The shape of the selected metal shape: Circle: thickness 12 mm Oval: thickness 12 mm Deoxidizer: Without deoxidizer, aluminum, zirconium, titanium Measurement time: 8 sec Tube Length: from 100 to 2500 mm (other length is possible on request) Slag Cap: Steel, Aluminum, Copper, cardboard Type of NSH: B, S, R

• Appointment Athlete KAI-2.501 o Search for a live cable. o Detection of the passage of hidden communications (metal pipelines, cable lines). o Preliminary detection of the distance to the place of damage. o Search for places of cable damage by acoustic method. o Search for places of cable damage by electromagnetic means. o Cable insulation test. o The presence of the "Friend-Foe" mode.

Purpose: Measurement of molten metal temperature Scope of application: Oxygen converters, electric arc furnaces, induction furnaces, blast furnaces, casting buckets Measuring range: from 700°C to 1800°C Accuracy: 0 + 3°C at 1554°C Measurement time: 4 sec Tube Length: from 100 to 1800 mm (other length is possible on request) Slag Cap: Steel, uncapped, aluminum Splash protection: Refractory fiber Type of NSH: B, S, R