NV-400 SHP Single-section cabinet for labware (400×460×1820)

The locker is designed for storing clothes in the changing rooms of industrial enterprises, medical institutions, educational institutions and other facilities. The design is based on a painted aluminum profile. Doors and other locker elements are made of moisture-resistant HPL-plastic. The materials used ensure the strength and durability of the product, are not afraid of moisture, and are suitable for sanitization with disinfectants. Width - 400

The SHVM NVK 1200 MON is a metal fume cupboard for laboratory. The table top is made of monolithic ceramics, its width is 1200 mm. External dimensions of the cabinet (W×D×H): 1260×750×2250 mm. Internal dimensions of the camera (W×D×H): 1200×600×1168 mm. Table top material: monolithic ceramic. Reliable and durable construction The table top is made of a single ceramic plate with a width of 1200 mm. The seamless monolith of the countertop provides the highest reliability and durability. THe ceramics are great for all chemical laboratories, including those that work with substances at high temperatures. It perfectly tolerates heat, is moisture-resistant, resistant to acids and alkalis. High-temperature equipment (drying cabinets, muffle furnaces) can be placed on the table top. The cabinet has an all-welded metal frame covered with durable powder paint. All panels are made of polymer-coated metal. The front anti-spill side is made of polished stainless steel AISI-316. There are four exhaust zones in the working chamber: they are located in the hood of the exhaust box and just above the level of the countertop. Diameter of the flange for connection to the ventilation system: 150 mm. The hood area is also made of metal. The protective screen of the cabinet can be easily lifted with one hand. It folds up and when lifted does not increase the overall height of the cabinet. It is made of 4 mm tempered glass in an aluminum frame. The sockets and the switch of the LED lamp are located outside the working area, on the right-hand side of the front panel of the cabinet. The sockets are splash-proof and are designed for current up to 16 A and voltage up to 250 V. Next to the switch there is a toggle switch of the automatic emergency power off. The reagents needed for work can be placed in the lower cabinet also made of metal. The cabinet has three swing doors and one fixed shelf. It has its own hood (pipe diameter 100 mm), which can be connected to the general exhaust system of the cabinet using the nozzle included in the cabinet kit. The cabinet legs are adjustable in height, allowing you to place the cabinet even on a rather uneven floor. Advantages of the SHVM NVK 1200 MON cabinet A metal fume cupboard suitable for any laboratory; Durable, reliable and very convenient to use; The protective screen is made of tempered glass; A hood is built into the cabinet, reagents can be safely stored in it. Application of the SHVM NVK 1200 MON cabinet Exhaust laboratory cabinets are used when working with toxic and harmful volatile materials, with clean materials, with dissolution or decomposition under heat treatment, when conducting sample analysis. Fume cupboards of the NV-Comfort series are used in laboratories of the widest profile: at food and light industry enterprises, in higher educational and scientific institutions, in chemistry classrooms at school, in quality control centers, medical organizations.

The SHVM NVK 1500 MON+ is a large metal fume cupboard with plumbing fixtures for laboratory. The table top is made of monolithic ceramics, its width is 1200 mm. External dimensions of the cabinet (W×D×H): 1560×750×2250 mm. Internal dimensions of the camera (W×D×H): 1500×600×1168 mm. Table top material: monolithic ceramic. A reliable and durable fume cupboard for laboratory The table top is made of monolithic ceramics. It is perfect for all chemical laboratories, including those that work with substances at high temperatures. It perfectly tolerates heat, is moisture-resistant, resistant to acids and alkalis. High-temperature equipment (drying cabinets, muffle furnaces) can be placed on the countertop. The width of the ceramic plate is 1200 mm, that is, there will be one seam in the countertop. The cabinet is mounted on an all-welded metal frame covered with durable powder paint. All panels are made of polymer-coated metal. The front anti-spill side is made of polished stainless steel AISI-316. There are four exhaust zones in the working chamber: they are located in the hood of the exhaust box and just above the level of the countertop. Diameter of the flange for connection to the ventilation system: 150 mm. The hood area is also made of metal. The protective screen of the cabinet can be easily lifted with one hand. It folds up and when lifted does not increase the overall height of the cabinet. It is made of 4 mm tempered glass in an aluminum frame. The small sink-drain is made of polypropylene, it is resistant to aggressive chemicals. Its internal dimensions: 218×115×122 mm. The faucet is made of brass, covered with polypropylene. The sockets and the switch of the LED lamp are located outside the working area, on the right-hand side of the front panel of the cabinet. The sockets are splash-proof and are designed for current up to 16 A and voltage up to 250 V. Next to the switch there is a toggle switch of the automatic emergency power off. The reagents needed for work can be placed in the lower cabinet. The cabinet is also made of metal. It has three swing doors and one fixed shelf. It has its own hood (pipe diameter 100 mm), which can be connected to the general exhaust system of the cabinet using the nozzle included in the cabinet kit. The cabinet legs are adjustable in height, allowing you to place the cabinet even on a rather uneven floor. Advantages of the SHVM NVK 1500 MON+ cabinet A metal fume cupboard with plumbing, suitable for any laboratory; The wide table top allows you to organize the workplace as conveniently as possible; It is durable, reliable and very convenient to use; The protective screen is made of tempered glass; The hood is built into the cabinet, reagents can be safely stored in it. Application of the SHVM NVK 1500 MON+ cabinet Exhaust laboratory cabinets are used when working with toxic and harmful volatile materials, with clean materials, with dissolution or decomposition under heat treatment, when conducting sample analysis. Exhaust cabinets of the NV-Comfort series are used in laboratories of the widest profile: at food and light industry enterprises, in higher educational and scientific institutions, in chemistry classrooms at school, in quality control centers, medical organizations.

The following options can be implemented on request: •additional time relays - allow you to time load control commands within one queue •output of ACR/CHAPV signals on one bus: the appearance of a signal - ACR, the disappearance of a signal - CHAPV •installation of a panel measuring device on the cabinet door •manufacture of cabinets of other dimensions, design and number of unloading queues •manufacture of outdoor cabinets

The NV-800 SHP cabinet is designed for storing labware. It has 2 shelves-inserts, 2 glass shelves, 4 drawers. The cabinet is made of laminated chipboard with a 2 mm shockproof PVC edge on the facades. Included in the set: - glass doors on top; - 2 glass shelves 5 mm thick; - 4 drawers in the lower compartment; - 1 door and 2 shelves-inserts for the lower compartment; - metal legs 100 mm high.

The cabinet is 1200 mm wide, 1025 mm high, made of painted steel. One compartment with two metal shelves. Overall dimensions 1200x500x1025 mm Weight 68 kg

Furniture for laboratory work. Storage cabinet open Length, mm: 800 Depth, mm: 500 Height, mm: 1940 PACKAGE CONTENTS the case is white melamine with a thickness of 16 mm, the ABS edge is dark gray 4 open compartments (upper 686 mm high, lower 1076 mm high).

Furniture for laboratory work. Cupboard for dishes Length, mm: 600 Depth, mm: 500 Height, mm: 1940 PACKAGE CONTENTS housing – metal painted with white powder paint (RAL 9016) roof, bottom, shelves – metal painted with dark gray powder paint (RAL 7011) facades – tinted light gray glass in a frame of aluminum profile painted with white powder paint (RAL 9016).

Cabinet for storage of reagents is 600 mm wide, 1050 mm high and is made of painted steel. There is one compartment with two metal shelves. Overall dimensions 600x500x1050 mm The diameter of the exhaust pipe is 100 mm Weight 38 kg

The cabinet with cells is designed for storing things in the changing rooms of industrial enterprises, medical institutions, educational institutions and other facilities. The design is based on a painted aluminum profile. Doors and other cabinet elements are made of moisture-resistant HPL-plastic. The materials used ensure the strength and durability of the product, are not afraid of moisture, and are suitable for sanitization with disinfectants. Width - 400

Cabinet 600 mm wide, 2025 mm high made of painted steel for storing laboratory utensils and documents. Two compartments with two metal shelves in each. The upper and lower doors are made of steel. Overall dimensions 600x500x2025 mm Weight 60 kg

Furniture for laboratory work. Wardrobe Length, mm: 900 Depth, mm: 500 Height, mm: 1940 PACKAGE CONTENTS housing – metal painted with white powder paint (RAL 9016) roof, bottom, shelves - metal painted with dark gray powder paint (RAL 7011) facades – metal painted with white powder paint (RAL 9016) 1 compartment 2 shelves without the possibility of height adjustment (a shelf for hats and a shelf for shoes).

Furniture for laboratory work. General laboratory storage cabinet Length, mm: 900 Depth, mm: 500 Height, mm: 1940 PACKAGE CONTENTS housing – metal painted with white powder paint (RAL 9016) roof, bottom, shelves – metal painted with dark gray powder paint (RAL 7011) facades - metal painted with white powder paint (RAL 9016) 2 compartments hinges outside the storage area (pin system) 4 shelves without the possibility of height adjustments.

Furniture for laboratory work. Length, mm: 800 Depth, mm: 580 Height, mm: 1810 case – melamine 16mm thick 1 branch 2 doors, lock in the right door 5 built-in shelves, the distance between the shelves is 256mm flange d=100mm

Furniture for laboratory work. Filing cabinet Length, mm: 900 Depth, mm: 500 Height, mm: 1940 PACKAGE CONTENTS housing – metal painted with white powder paint (RAL 9016) roof, bottom, shelves – metal painted with dark gray powder paint (RAL 7011) facades: - lower compartment - metal painted with white powder paint (RAL 9016) - upper compartment – tinted light gray glass in a frame made of aluminum profile painted with white powder paint (RAL 9016).

Furniture for laboratory work. Cabinet Length, mm: 600 Depth, mm: 500 Height, mm: 1940 PACKAGE CONTENTS housing – metal painted with white powder paint (RAL 9016) roof, bottom, shelves – metal painted with dark gray powder paint (RAL 7011) facade – metal painted with white powder paint (RAL 9016).