ACID-RESISTANT MOBILE DRAWER UNITS

Table top: FRIDURIT 20mm Length, mm: 1538 Depth, mm: 726 Height, mm: 2100 equipment Working box front anti–spill side - TRESPA TopLab sink-drain (ceramics, internal size 250*95*112mm), pipe for water the package includes a siphon corrugated 2 flexible eyeliners with a length of 1200mm housing – melamine with a thickness of 16mm lifting screen with the possibility of fixing at any height – tempered glass with a thickness of 5mm, lifting 0-700mm, increase the height of the cabinet at full lifting by 450mm

Furniture for laboratory work. Table-sink LAB-M MO 150.65.90 PP Width, mm: 1500 Depth, mm: 650 Height, mm: 900 Equipment: The table top is polypropylene with an overhead rim around the perimeter. Attention! It is not recommended to use a polypropylene bowl for working with oil and petroleum products (fuel oil, bitumen, etc.) . The location of the bowl in the center, the mounting of the bowl is suspended. Inner bowl size – 400*400*300 mm The base of the sink table is a support pedestal made of white melamine Facades – laminated MDF of white color with a thickness of 16 mm, dark gray ABS edging Without shelves

Furniture for laboratory work. Sliding cabinet Length, mm: 400 Depth, mm: 580 Height, mm: 680 PACKAGE CONTENTS case – melamine 16mm thick inner size of the box – 310*470* 80mm roller supports h=60mm

Furniture for laboratory work. Sliding cabinet Length, mm: 400 Depth, mm: 580 Height, mm: 680 PACKAGE CONTENTS case – melamine 16mm thick inner drawer size upper drawer – 310*470* 120mm bottom drawer – 310*470* 300mm roller supports h=60mm

Furniture for laboratory work. Cabinet for appliances Length, mm: 500 Depth, mm: 500 Height, mm: 1940 PACKAGE CONTENTS body – white melamine with a thickness of 16 mm, ABS edge dark gray facade – white melamine with ABS edge dark gray 2 compartments (the upper one is 686 mm high, the lower one is 1076 mm high) the upper compartment is open, the lower one with a hinged facade has 5 shelves (1 built-in, 4 removable (1 in the upper compartment, 3 in the lower one) with the possibility of rearrangement on 3 levels in height each).

The cabinet is made of laminated chipboard with a 2 mm shockproof PVC edge on the facade. The standard equipment of the NV-800 SB includes: 2 doors; chain mount for 2 cylinders.

Table top to the island table on the support tables Material: KG (porcelain stoneware) Length, mm: 1200

Furniture for laboratory work. WASHING TABLE ON A METAL SUPPORT STAND LAB-M MO13 ME 50.60.90 SS Width, mm: 500 Depth, mm: 600 Height, mm: 900 equipment: The table top is a single module made of SUS 201 stainless steel (analogous to AISI 201). Attention! The product is recommended to be used only for work with non-aggressive substances. For work with various reagents except mineral acids, it is recommended to use washing tables made of AISI 304 stainless steel. the inner size of the bowl: LAB-M MO13 50.60.90 SS – 340*420* 130mm The base of the sink table is a metal support pedestal. The lower part is an all–welded frame painted with dark gray powder paint RAL 7011. The bottom and top of the housing are sheet steel painted with powder paint of dark gray RAL 7011, the side walls are made of sheet steel painted with powder paint of white RAL 9016. Facades – laminated MDF of white color with a thickness of 16 mm, dark gray ABS edging

BASIC EQUIPMENT guide racks – aluminum profile painted with powder paint (RAL 7035/ RAL 5023) in the right rack there are a light switch and 3 splash-proof sockets with a 3.2kW cover (IP54) in the left rack there are a water valve and a nitrogen valve, rear, upper, side panels - metal painted with powder paint (RAL 7035) with the texture of shagreen leather bottom – corrugated aluminum sheet 3mm 3 dependent lifting screens – tempered glass in aluminum profile frames, lifting 0-1800mm, do not change the dimensions of the cabinet when lifting, the middle and upper screens are equipped with sliding glass doors made of tempered glass with a thickness of 4mm upper fixed screen – metal, powder-painted paint (RAL 7035) with the texture of shagreen leather in the upper part and tempered glass in the lower part in an aluminum profile frame on the upper panel: LED lamp dust– and moisture-proof (2x22 W IP65) flange d=250mm (distance from the back panel to the center of the flange - 155mm) switching box with automatic emergency power off 16A 3 extraction levels technological opening d =50mm with a plug and outlet at the bottom of the right sidewall and right rear rack counterweights are placed in the front pylon racks and are easily serviced on the left side panel service module with cold water and nitrogen supply pipes on the service panel there is a wall-mounted drain sink made of polypropylene. (ext. size 250*100*150mm) pipe d/water pipe d/nitrogen

General laboratory cabinet with a width of 900 mm, a height of 2025 mm made of painted steel for storing clothes. One compartment with a shelf and a barbell. Overall dimensions 900x500x2025 mm Weight 81 kg

The NV-400 TDn cabinet on wheels with a door and a shelf-insert. The standard version of the cabinet on wheels for the laboratory table includes: a swing door, an insert shelf, 2 mm shockproof PVC edge on the countertop and facade, plastic wheels. In the standard version, we offer cabinets for laboratory tables in gray color. However, in agreement with the customer, it is possible to change the color to white, without increasing the cost. We are also ready to adapt the size and materials so that they meet your needs.

Combined working surface: main table top - KG-ESS (porcelain stoneware) with a side made of stainless steel, 650 mm deep / auxiliary table top made of TRESPA material with a depth of 150 mm Length, mm: 1500 Depth, mm: 800 Height, mm: 900 BASIC EQUIPMENT The base is a collapsible frame made of rectangular steel profile, painted with powder paint (RAL 7035) with the texture of shagreen leather Hidden fasteners Two easily removable rear screens (RAL 7035) and one non-removable (RAL 5023) Rear side boxes Adjustable supports (0-40 mm)

This small mobile table is designed to move heavy equipment around the laboratory. When not in use, it can be moved under a regular office desk as the height of the NV-600 STP is 65 cm. The table top is made of laminated chipboard. The NV-600 STP has a metal frame painted with durable powder paint. The side laminated panels (chipboard 16 mm thick) and the lower shelf are edged on the facade with a 2 mm PVC edge, which increases their impact resistance and mechanical strength. The table wheels allow you to conveniently move the equipment around the laboratory. For easier movement, the table is equipped with side handles. In the drawer and on the bottom shelf, you can store equipment accessories or the necessary small stuff. Dimensions of the table when assembled (W×D×C): 600×350×650 mm. Advantages of NV-600 STP tables Small size: if it is not needed, it can easily be moved under a regular table. An inexpensive solution for laboratories that value the reliability and durability of furniture. Suitable for the small rooms. Application of NV-600 STP tables NV series tables are used in laboratories of the widest profile: at food and light industry enterprises, in scientific and educational workshops, in chemistry classrooms, quality control centers, medical organizations and many others.

The NV-800 MOPB is a table with a deep sink made of polypropylene and without a dryer. It is designed for standing work: its height is 85 cm. Dimensions when assembled (W×D×H): 800×600×850 mm. The table top is made of laminated chipboard. It has a built-in Stegler WJH0357F polypropylene sink, its internal dimensions (W×L×H): 490×390×290 mm. The polypropylene is resistant to prolonged exposure to concentrated acids, alkalis and organic solvents and is excellent for washing laboratory dishes. The side laminated panels of the table (chipboard 16 mm thick) are edged on the facade with a 2 mm PVC edge, which increases their impact resistance and mechanical strength. The package includes a stainless steel mixer with flexible 300 mm tap connectors and a siphon. The legs of the table are adjustable in height within two centimeters, allowing you to place it even on a rather uneven floor. Advantages of NV-800 MOSFET-B tables A minimalistic compact model with polypropylene sink. An inexpensive solution for laboratories that value the reliability and durability of furniture. Suitable for very small rooms. Application of NV-800 MOPB tables Tables of the NV series are used in laboratories of the widest profile: at food and light industry enterprises, in scientific and educational workshops, in chemistry classrooms, quality control centers, medical organizations and many others.