Search

Technical specifications Material: S-TIH53 (Ohara) Length, mm: 5.8±0.02 Height, mm: 1.5±0.02 Thickness, mm: 1.0±0.01 Refractive index, mm: 1.823 Pitch, mm: 1.0 Radius, mm: 6.52 Effective focal length, mm: 8.01 Rear focal length, mm: 7.45 Transmission, %: >99.5 Antireflection coating, nm at one of the wavelengths from the range: 400-1500 Numerical aperture: 0.056 Surface quality at λ = 633 nm: λ/4 Residual deviation at full angle FW1/e2 (for non-linear deviation of the laser diode), mrad: 12.5

Designed for filtration, evaporation, distillation, distillation, distillation and synthesis in laboratory conditions.

Silicone hose with an inner diameter of 8 mm is used to connect circulation coolers A160 and A300 with thermostats of the W series or to external consumers.

The trace searching kit is designed to accurately determine the location and depth of underground utilities (power and signal cable lines, reinforced fiber-optic lines, pipelines made of electrically conductive materials), troubleshooting cable lines, and also allows you to conduct a survey of the area in the shortest possible time and with great reliability before excavation and to prevent damage to engineering communications. As part of the kit, the receiver is in the form of a monoblock with a large LCD display, which displays an image of the route and automatically calculates the depth of the communication up to 10 m, as well as the current in the line. Connection to the desired route is possible both by contact and contactless method.

The LOIP LT-216a modification device consists of an immersion thermostat-circulator LOIP LT-200 and a working bath with a flat removable lid. Technical specifications: Temperature range: without external cooling, °C Current+10 ... +200 with tap water cooling °C Tvods+5 ...+200 Accuracy of temperature maintenance, °C ± 0.1 The error of setting the set temperature, no more than ° C ± 0.2 Heater power, W 2000 Pump: max. flow rate, l/min 10.5 pressure, 0.27 bar Bath volume, l 16 The working fluid is water, water-glycerin mixture, silicone oil. The open part of the bath / depth, mm 190x296/200 Overall dimensions, mm 355x335x42 0 Weight, kg 11.5

Technical specifications: Type of motion orbital Platform rotation speed, min-1 40-300 The amplitude of rotation of the platform, mm 30 Maximum load on the platform, kg 20 Timer (time is displayed in h, min, s) 0...8 hours Power consumption, W 200 Platform size, mm 445x305 Overall dimensions, mm 525x510x225 Weight, kg 32

The series is designed for heat treatment according to pre-created programs. The presence of remote control and a number of software options allows you to use the product for long-term heat treatment modes. Vacuum drying cabinets can be used for: - gentle drying of thermo- and oxygen-sensitive substances, such as food, medicinal, cosmetic products; - complete removal of residual moisture from heat-sensitive components with a complex shape, such as components of electronic equipment, jewelry, watches and other precision mechanics; - removal of air when filling the molds with a compound, followed by solidification at a given temperature; - removing air from the product and replacing it with another necessary gas medium; - tempering, annealing or aging of metals with the appropriate processing temperature in a vacuum or protective environment; - drying of products after washing in flammable solvents (special version); - testing of devices under low pressure conditions under various temperature conditions.

The trace searching kit is designed to accurately determine the location and depth of underground utilities (power and signal cable lines, reinforced fiber-optic lines, pipelines made of electrically conductive materials), troubleshooting cable lines, and also allows you to conduct a survey of the area in the shortest possible time and with great reliability before excavation and to prevent damage to engineering communications. As part of the kit, the receiver is in the form of a monoblock with a large LCD display, which displays an image of the route and automatically calculates the depth of communication up to 10 m, as well as the current in the line. Built-in GPS\GLONASS module for determining and recording the coordinates of the location of communication. Compact stand-alone generator with display and built-in induction antenna. The output power of the generator is up to 20 watts and the range of operation is up to 3 km. Connection to the desired route is possible both by contact and contactless method.

Designed for automated and routine microscopic procedures. Before using, it is necessary to remove the protective film on both sides of the polyslide. After removing the film, no surface treatment is required.

It is designed to maintain a set temperature of a liquid coolant circulating both in an internal bath and in external consumers of open or closed type. Pump for closed or open type thermostating systems. All-metal stamped tub with a volume of 3 liters and a depth of 150 mm. The stability and uniformity of the temperature in the inner bath is not worse than ± 0.1 ° C. The operating temperature range is +20...+200 °C. Bath volume 3 l Overall dimensions 170x350x430 mm The open part of the bath is 75x35 mm Bath depth 150 mm Weight 11 kg Power consumption 2.2 kW

A set of hardware and software is designed to measure physical and chemical quantities when monitoring the parameters of objects and the environment A set of hardware and software tools allows to control the parameters of objects and the environment by visually observing the readings of the data logging unit Technical specifications: Main technical characteristics 1 Air temperature and humidity control module: measurement of ambient temperature.……………..……... from -30 ° C to +60 °C; measurement of the relative humidity of the environment.......... from 10% to 100 %; 2 Differential pressure monitoring module: measuring range..................................................................... from 0 to 700 kPa; 3 PH level monitoring module: measuring range......................................................................... from 0 to plus 12 pH units; 4 Light control module: measuring range..........................................................……………. from 5 to 65000 lux; 5 Distance control module: measuring range.......................................................………………. from 0.04 to 4 m; 6 Rotation angle and angular velocity control module: rotation angle measurement range................................................ from 0 ° to 360 °; angular velocity measurement range ......................................... from 0 °/s to 2000 °/s; 7 : Optical density control module for solutions: measuring range.................................................................... from 0 to 4.8 units of optical density; 8 Module for monitoring the electrical conductivity of solutions: measuring range........................................................................... from 0 to 10 mSm/cm; 9 Data registration unit: - USB 2.0 port; - built-in color display based on the TFT LCD module, diagonal size 4”; - touch panel.

The kit is designed to measure the temperature of ferrous metal melts. It consists of a digital contact thermometer TK-5.27 complete with a submersible high-temperature probe, designed to measure the temperature of metal melts in the range of +600 ° C ... +1800 ° C. The digital contact thermometer TK-5.27 is equipped with the function of recording measurements in the device's memory, followed by transferring data to a computer and providing reports in the form of tables and graphs. To measure the temperatures of metal melts, disposable thermocouples of the PPR (B) type with a protective tube length of no more than 900 mm are used. The kit is adapted to the replacement blocks of EVRAZTEMP ET-V-09-00. •