Search

Reagent jar, light glass Primelab, 10000 ml is designed taking into account the requirements of safety, ease of use and all the nuances of working with reagents of different consistency. These are liquid, volatile, loose, chemically active acids and others. Thanks to the transparency of the glass, it is possible to observe all processes inside the jar in real time without opening the lid and excluding the impact of the external environment on the contents. Specifications: • Volume – 10000 ml • Height – 410 mm • Diameter – 234 mm • Thread - GL45.

Our company produces water-jet pumps not only according to our drawings, but also according to the customer’s drawings and technical specifications. How to order The Primelab water jet pump is an effective and simple device that allows you to pump out air from a desiccator, small reactor or evaporator, and organize the functioning of a vacuum line. It does not require electricity to operate, just connect to the water supply. The product is made of high quality heat-resistant tempered glass. The upper outlet is connected to the water supply using a flexible hose; water will be drained through the lower outlet. The side outlet is connected to the device in which it is necessary to create a vacuum. The pump is installed vertically. Tap water is supplied from top to bottom. The upper part of the pump gradually narrows, increasing the speed of water flow. The jet exits the nozzle at the central expansion. According to the laws of physics, as the speed of water flow increases, the pressure drops. Therefore, a vacuum is formed in the central expansion, which draws in air from the side outlet. This air is entrained by the falling water into the lower outlet tube. In this way, air is pumped out from the device or vessel connected to the pump.

The electrochemical cell made of borosilicate glass was manufactured in the glassblowing workshop of the PrimeLab company. It has a long service life and is thermal and chemical resistant. Designed for various electrochemical processes. Externally, it has a non-standard shape with three branches, at the ends of which there are olives. Thanks to this, any soft hose can be firmly attached to the cell. Made of borosilicate glass, which is resistant to mechanical stress. Suitable for working in high temperature environments. You can order electrochemical cells made of borosilicate glass from Primelab in any quantity. Production times depend on quantity.

The stirrer is designed for uniform mixing of reagents inside the container due to the rotation of the magnetic element (armature) with the function of heating the container with liquid. The mixer operates in the speed range from 200 to 1500 rpm, the maximum heating temperature of the working surface is 500 °C. The heating plate includes a stainless steel base and a fireproof glass work surface. At temperatures above +550 °C, automatic overheating protection is triggered and turns off the heating. The device is equipped with an LCD screen to display set and actual temperatures, rotation speeds and additional animated icons.

Heat transfer surface 1700 cm2 Rotation speed, rpm 20-280 Temperature, °C heating - from room temperature to 180 °C Motor operating principle brushless, DC Overall dimensions, L×W×H, mm 465×457×583 Protection class acc. to DIN EN60529 IP20 Nutrition 100-120/200-240 V, 50/60 Hz Volume, l 5 (bath) Lift, m motorized, stroke 150 mm Weight, kg 15 Timer 1-999 min Accuracy thermostat ±1 °С Engine power, W 1400, heater 1300 W Interface USB

Along JSC 14/23 - 14/23 Primelab is a special accessory that is used to connect various installations and secure exchange between them. Provides a tight connection. It has chemical and thermal resistance and tolerates temperature changes well. Made from borosilicate glass 3.3. Connection to auxiliary equipment is made using a coupling grind (14/23) and a core (14/23). The total length of the allonge is 90 mm with a diameter of 6 mm.

The PrimeLab screw cap tube holds 30 ml. The throat diameter is 20 mm with a height of 150 mm. Suitable for various laboratory processes involving reagent storage, experimentation, transportation, etc. The screw cap creates a sealed connection to the tube, thereby protecting the contents from external influences and preventing leakage. In some cases, this is extremely important and can affect the final outcome of an experiment or other laboratory process.

Bunsen flask 1-1000 with Primelab tube, stopper 40 has a conical shape with a side outlet. For vacuum filtration, it is enough to connect a soft hose of the vacuum pump to the outlet and close the neck with a 40 mm plug (not included in the package). The volume of a Bunsen flask is 1 liter. The height of the entire product is 245 mm. It has a long service life and is resistant to intensive use.

The vacuum diaphragm pump PL.HM01.01.10 has two working chambers, which are connected in series. They are made of fluoroplastic, and other products have a fluoroplastic coating, due to which the device has high chemical resistance. Fully compliant with IP20 protection class. Characteristics • Valve material (valves) standard: chloroprene copolymer NO-68-1 (TU 38 0051166-98) • Country Russia • Power: 180 W • Overall dimensions, L×W×H: 322x140x200 mm • Protection class acc. with DIN EN60529: IP20 • Noise level: 75 dB • Power: 220 V/50 Hz • Ultimate vacuum: 10* mbar abs. • Maximum permissible excess pressure: 0.5 bar. • Capacity: 38 l/min • Connection outer diameter, 9 mm. • Maximum current: 1.2 A • Device weight: 9 kg Equipment Vacuum pump, cable, instructions, passport, packaging (vacuum regulator and spare parts are not included in the kit and must be ordered separately).