Catalog
Back to search results
Primelab borosilicate glass electrochemical cell
Back to search results
Primelab borosilicate glass electrochemical cell
The electrochemical cell made of borosilicate glass was manufactured in the glassblowing workshop of the PrimeLab company. It has a long service life and is thermal and chemical resistant. Designed for various electrochemical processes. Externally, it has a non-standard shape with three branches, at the ends of which there are olives. Thanks to this, any soft hose can be firmly attached to the cell. Made of borosilicate glass, which is resistant to mechanical stress. Suitable for working in high temperature environments. You can order electrochemical cells made of borosilicate glass from Primelab in any quantity. Production times depend on quantity.
Tripod "workplace" for single and stripped 0.2 ml tubes, 96 seats
from
2 100 ₽
Tripod "workplace" for single and stripped 0.2 ml tubes, 96 seats
VIS MED
Berdsk
Produced in: Berdsk, Novosibirsk region
Flat-bottomed flask P-2-1000-42 Primelab, TS
from
478 ₽
Flat-bottomed flask P-2-1000-42 Primelab, TS is one of the most popular types of flasks for a wide range of laboratory processes. This is due to its successful form, which has many advantages. Among the main ones: • A flat bottom with a spherical shape, which allows you to place the flask on any flat surface without an additional stand. • Ball shape with a diameter of 131 mm, in which the entire contents are evenly heated and brought to a boil; • Narrow neck (diameter 42 mm), protecting against excessive evaporation when boiling. Designed to work with any substance whose volume does not exceed 1000 ml.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Conical flask Kn-2-100-34 Primelab
from
132 ₽
The conical flask Kn-2-100-34 Primelab is made of borosilicate glass 3.3, which perfectly withstands temperature changes, as well as working with acids, alkalis and other aggressive substances. Suitable for storage, filtration, heating, cooling, mixing and other laboratory processes. The Kn-2-100-34 Primelab flask has compact dimensions. The height is 105 mm with a base diameter of 64 mm and a neck of 34 mm. Designed for 100 ml of any substance.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Transition with Primelab vacuum valve
The adapter with a Primelab vacuum valve is one of the most popular devices used in creating a vacuum system and working in vacuum conditions. It can be used to regulate the flow of gas or air. Used to connect equipment or create a vacuum. The device is equipped with a grinding core NS 19/26 and a vacuum valve with olive for reliable connection with a soft hose or other equipment. The transition is made of borosilicate glass, making it suitable for operation at different temperatures. Even with intensive use it has a long service life and wear resistance.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Flat-bottomed flask P-2-1000-50 Primelab, TS
from
588 ₽
The flat-bottomed flask P-2-1000-50 Primelab, TS has a spherical shape with a flat bottom that is convenient for use. This ensures stability on any flat surface while maintaining all the advantages of ball-shaped flasks. The diameter of the ball is 131 mm with a neck diameter of 5 mm. The height of the entire product is 200 mm. Suitable for working with any substances up to 1 liter. The flask is made of durable heat-resistant glass, which can be heated and cooled. Suitable for synthesis, distillation, heating and other laboratory processes.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
500 ml reagent bottle made of light glass with a narrow neck and ground-in Primelab stopper
from
258 ₽
A 500 ml light glass reagent bottle with a narrow neck and a ground stopper is designed for storage, transportation, mixing and other laboratory processes. Supplied complete with a ground-in stopper, ensuring a tight connection with the bottle.
Characteristics:
• Volume – 500 ml
• Base diameter – 85 mm
• Throat diameter – 33 mm
• Height – 172 mm.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Conical flask Kn-2-250-50 Primelab
from
189 ₽
The conical flask Kn-2-250-50 Primelab is made of transparent borosilicate glass, which ensures control of all processes inside the container. Suitable for storage, heating, cooling, filtration and other laboratory processes. Characteristics of the Kn-2-250-50 flask: • Volume – 250 ml • Neck diameter – 504 mm • Base diameter – 64 mm • Height – 140 mm. It has a stable base that prevents the flask from tipping over. The neckline has rounded edges.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Alonge type "Spider" with vacuum valves KV-19 14/23-19/26 Primelab
The "Spider" type with vacuum valves KV-19 14/23-19/26 Primelab has a non-standard appearance. Serves as a connecting element in laboratory installations, apparatus and devices. It has a reliable design that guarantees excellent tightness and prevention of gas leakage. The product is made in accordance with GOST from borosilicate glass, which does not enter into chemical reactions with contacted substances and is not afraid of temperature changes. The Primelab company accepts orders for the production of equipment and glassware according to the customer’s individual parameters.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Conical flask KN-2-2000-72 Primelab
from
945 ₽
Conical flask KN-2-2000-72 Primelab is a high-quality laboratory accessory made of heat-resistant borosilicate glass 3.3. It has an easy-to-work shape with a wide base of 131 mm and a relatively narrow neck of 72 mm. Designed to work with bulk and liquid substances, the volume of which does not exceed 2 liters. The total height of the flask is 280 mm.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Separating funnel VD-3-1000 Primelab, pear-shaped
from
1 491 ₽
The VD-3-1000 PrimeLab pear-shaped separating funnel will help you quickly and effectively separate different types of substances, the volume of which does not exceed 1000 ml. Externally, it is pear-shaped with a core, tap and spout, the length of which is 70 mm with a total length of the entire funnel of 400 mm. The diameter of the spout is 12 mm, which is more than enough to work with substances of any consistency.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Desiccator 1-210 mm Primelab, with tap, dark glass
from
2 520 ₽
Desiccator 1-210 mm PrimeLab with tap is made of durable dark glass. Suitable for creating stable, low-humidity conditions for storing and drying light-sensitive substances. It can be connected to a vacuum pump. Desiccator 1-210 mm holds up to 4500 ml of substance of any consistency. Its diameter is 210 mm with an insert diameter of 176 mm. The container has a durable design and is quite easy to use. Features a long service life even with intensive use.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
250 ml reagent bottle made of light glass with a wide neck and ground-in Primelab stopper
from
258 ₽
A 250 ml reagent bottle made of light glass with a wide neck and a ground-in stopper PrimeLab is a reliable container for storing, transporting or mixing substances of different consistencies. Thanks to the wide neck (5 cm), bulk substances and liquid reagents can be easily placed into it. The total height is 13 cm with a base diameter of 7 cm. The ground stopper included is suitable for firmly closing the container, which will protect the contents from leakage and evaporation. The bottle is made of borosilicate glass 3.3, so it can be sterilized in different ways for reusable use.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Richter Absorber Primelab (high-speed)
Richter absorber PrimeLab (high-speed) is a laboratory device for high-speed purification and absorption of gases. Its design consists of two spherical extensions. Two tubes are soldered into the top one: gas is released along the long one for purification, and through the second it comes out in a purified form. A high-speed Richter absorber was produced by Primelab from borosilicate glass. This determines the vessel’s ability to withstand the influence of different temperatures, strength and long service life. Does not react with chemically active substances. Thanks to transparency, you can observe all processes inside the vessel.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Conical flask KN-1-500-29/32 with Primelab divisions, GOST 25336-82
from
494 ₽
Conical flask KN-1-500-29/32 with divisions complies with GOST 25336-82. Made of transparent borosilicate glass, which allows you to observe all the processes inside. A capacity scale is applied to its wall, allowing you to determine the volume of contents in a matter of seconds. A ground joint (29/32) is provided on the neck, with which the equipment can be securely attached to the flask. The volume is 500 ml with a height of 165 mm. The diameter of the base is 105 mm.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Flat-bottomed flask P-2-5000-55 Primelab, TS
from
2 310 ₽
Flat-bottomed flask P-2-5000-55 Primelab is designed to work with large amounts of substance (up to 5,000 ml). Suitable for storage, uniform heating or cooling of contents, mixing and other laboratory processes. It has the shape of a ball with a flat, stable bottom, so the flask does not require specialized stands.
Characteristics of the P-2-5000-55 Primelab flask:
• Ball diameter - 235 mm
• Neck diameter - 55 mm
• Height of the flask - 400 mm
• Volume - 5 l.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Primelab filtration apparatus, 1000 ml flask
The PrimeLab Filtration Apparatus, 1000 ml flask is a unit designed to separate solids or sediment from a liquid by using a filter disc connected to a funnel and securing them in an adapter. It is made of reliable and transparent borosilicate glass. Thanks to this, you can monitor all processes inside the device.
The device package includes the following parts:
• Receiving flask;
• Cylindrical funnel (300 ml);
• Filter and clamp;
• Adapter with outlet. The volume of the filtrate receiver is 1 liter.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region
Transition P1-2-29/32-60/46 Primelab
Transition P1-2-29/32-60/46 was produced by PrimeLab in its own glass blowing shop from borosilicate glass. It is resistant to temperature changes and wear. It does not enter into chemical reactions with substances, as it has excellent chemical inertness. An adapter is used for seamless connection of parts of equipment, installations and various devices with different joints. Facilitates assembly and maintenance of equipment. It is used in laboratories, small industries in various fields and more. The Primelab company offers blow molding services for various products in strict accordance with the customer’s drawings and technical specifications.
Primelab
Mytishchi
Produced in: Mytishchi, Moscow region