Tula-Term

Designation SNO 64/17 Rated power Pmax, kW 18 Power supply voltage U, In 3 phases + N+PE 380 Maximum operating temperature T slave, oS 1700

Industrial drying cabinet SNOL (SHS) 700/5-I2 V is designed for drying, tempering, aging, thermal testing and other types of heat treatment of various materials in an air environment at a temperature of 500 ° C with forced air convection in stationary conditions.

The vacuum trap of the condenser type FVC-2/20-X in a chemically resistant design with a capacity of 2 liters is designed to condense aggressive gas vapors on the internal cooled surfaces of the trap, in order to prevent them from entering the pump.

Resistance chamber furnaces of periodic action of the SNO type with silicon carbide heaters designed for heat treatment of various materials in an aggressive air environment at temperatures up to 1450 ° C. The furnace can be used for processing aggressive materials. For example, molten salts, Operating conditions: closed explosion-proof rooms without aggressive vapors and gases, at atmospheric pressure from 84 to 106.7 kPa, with a temperature in the range from 10 to plus 45 ° C and a relative humidity of no more than 95% at 35 ° C and lower temperatures without condensation of moisture.

The vacuum drying cabinet SNVS-190/5V I4 is designed to remove the residual amount of solvent from the polyamide coating of the optical fiber after extraction to increase the strength of the optical fiber at temperatures up to 500 0C and an average vacuum up to 5x10-2 mmHg.

The SNVS-215/3.5 vacuum drying cabinet with a volume of 215 liters with manual vacuum adjustment is designed for heat treatment of materials at temperatures up to 350 with air access and in a vacuum controlled by manual valves. Thanks to modern temperature control, it demonstrates excellent performance of heat treatment modes. The measurement system complies with Russian standards and has certificates of entry into the SI State Register. Design for heat treatment in production and clean laboratories. The cabinet can be equipped with a software control device with an automatic timer and a wide selection of additional options.

Industrial drying cabinet SNOL (SHS) 2300/3-I2 V is designed for drying, tempering, aging, thermal testing and other types of heat treatment of various materials in an air environment at temperatures up to 350 (optionally up to 500) ° C with forced air convection in stationary conditions.

Designation: SNOT-12.16.16/1,2- I2-In Temperature 0C: 120 Door opening: manual Hearth drive: electromechanical Camera Size (WSHG): 1600x1200x1600 Fan: Yes

The electric furnace is designed for various thermal processes of annealing, degassing, sintering and other processes in vacuum at temperatures up to 1600 ° C and small gas emissions, in which there is no interaction of the residual gas medium with heater materials, screen insulation and other structural elements.

They are designed for carrying out various technological processes at temperatures from 40 to 500 oC, in vacuum up to 1x10−3 mmHg, or in an inert gas of high purity. They are used for drying, light annealing, aging, low and medium tempering in an oxidizing environment, degassing of ferrous and non-ferrous metals (including copper and copper alloys), or any other materials processed under similar conditions. The program setting of heat treatment modes including vacuuming, high purity inert gas intake with repeated vacuuming allows heating in an oxidizing environment with high purity of the surfaces of the processed parts, without scale formation and oxidation.

The series is designed for heat treatment according to pre-created programs. The presence of remote control and a number of software options allows you to use the product for long-term heat treatment modes. Vacuum drying cabinets can be used for: - gentle drying of thermo- and oxygen-sensitive substances, such as food, medicinal, cosmetic products; - complete removal of residual moisture from heat-sensitive components with a complex shape, such as components of electronic equipment, jewelry, watches and other precision mechanics; - removal of air when filling the molds with a compound, followed by solidification at a given temperature; - removing air from the product and replacing it with another necessary gas medium; - tempering, annealing or aging of metals with the appropriate processing temperature in a vacuum or protective environment; - drying of products after washing in flammable solvents (special version); - testing devices under low pressure conditions under various temperature conditions.

The SNVS-50/3.5 vacuum drying cabinet with a volume of 50 liters with manual vacuum adjustment is designed for heat treatment of materials at temperatures up to 350 with air access and in a vacuum controlled by manual valves. Thanks to modern temperature control, it demonstrates excellent performance of heat treatment modes. The measurement system complies with Russian standards and has certificates of entry into the SI State Register. Design for heat treatment in production and clean laboratories. The cabinet can be equipped with a software control device with an automatic timer and a wide selection of additional options.