LOIP

Furniture for laboratory work. Microscopy table Length, mm: 1500 Depth, mm: 700 Height, mm: 760(1140) TABLE top – laminate shelf for Petri dishes (8 cells with an internal size of 140*100*90mm, 3 cells with an internal size of 190*100*90mm) – melamine 16mm thick side decorative panels – melamine 16mm thick

Furniture for laboratory work. Cabinet with countertop Working surface: TRESPA TopLab Length, mm: 500 Depth, mm: 800 Height, mm: 900 EQUIPMENT cabinet - melamine 16mm thick 1 door 1 built-in shelf lock all-welded frame made of rectangular metal profile painted with white powder paint adjustable supports

equipment sink-drain (polypropylene, internal size 250*100*150mm), laboratory faucet for water the scope of delivery includes a siphon corrugated hose flexible liner length 1200mm rack support racks – aluminum profile painted with powder paint (RAL 1001) top panel depth 190mm – metal painted with powder paint (RAL 1001)

BASIC EQUIPMENT: Working box front guide posts – aluminum profile painted with powder paint (RAL 7035/RAL 5023), in the right rack there are a light switch and 2 splash–proof sockets with a 3.2kW cover (IP54) the front anti-spill side is acid-resistant polished stainless steel. AISI 316 steel rear, upper, side panels – metal painted with powder paint (RAL 7035) with the texture of shagreen leather inner capsule made of polypropylene lined with ceramic plates of the rear and side panels to a height of 380mm 2 dependent lifting screens – tempered glass in aluminum frames, lifting 0-780mm, do not change the dimensions of the cabinet when lifting the upper fixed screen – polypropylene on the top panel: LED dust– and moisture-proof lamp 2x22 W (IP65) is separated from the workspace by tempered glass with a thickness of 4mm flange d=250mm (distance from the back panel to the center of the flange - 170mm) switching box with automatic emergency power off 16A 3 exhaust levels easily removable exhaust visors counterweights are placed in the front pylon racks and are easily serviced Frame base collapsible frame made of rectangular metal profile painted with powder paint (RAL 7035) with the texture of shagreen leather service panel - aluminum profile painted with powder paint (RAL 5023) with the texture of shagreen leather adjustable supports

Metal single support cabinet with 4 drawers Length, mm: 860 Depth, mm: 500 Height, mm: 860 Completely made of powder-coated steel (RAL 7035) with the texture of shagreen leather Frameless housing design One compartment with 4 drawers The side walls and facades are double. The thickness of the side walls is 19 mm, the facades are 18 mm The facades are filled with noise-absorbing material Handles - polypropylene Telescopic guides of full extension Internal size of the drawer: 770*410*85 mm The permissible load per box is 20 kg. Hidden adjustable supports (0 - 40 mm). The adjustment of the supports is carried out from inside the pedestal through the base of 8 standard variants of LAB-PRO RP work surfaces

equipment side decorative panels – melamine 16mm thick all-welded frame made of rectangular metal profile painted with white powder paint adjustable supports

Technical specifications: Operating temperature range, °C -25...+100 Accuracy of temperature maintenance, °C ± 0.1 The discreteness of the temperature display, ° C 0.1 Cooling capacity at 20°C, W 650 Pump capacity in the discharge (suction) circuit, not less than, l/min 10.5 Volume of working fluid, l 16 Power supply, V/Hz 220/50 Power consumption, no more than 3.6 kW Open part of the bath/depth, mm 248x170/200 Overall dimensions, mm 450x420x890 Weight without working fluid, kg 55

The LOIP LT-205a modification device consists of an immersion thermostat-circulator LOIP LT-200 and a working bath with a flat removable lid. Technical specifications: Temperature range: without external cooling, °C Current+10 ... +200 with tap water cooling °C Tvods+5 ...+200 Accuracy of temperature maintenance, °C ± 0.1 The error of setting the set temperature, no more than ° C ± 0.2 Heater power, W 2000 Pump: max. flow rate, l/min 10.5 pressure, 0.27 bar Bath volume, l 5 The working fluid is water, water-glycerin mixture, silicone oil. The open part of the bath / depth, mm 120x150/150 Overall dimensions, mm 180x335x370 Weight, kg 6.5

equipment side decorative panels – melamine 16mm thick all-welded frame made of rectangular metal profile painted with white powder paint adjustable supports

Furniture for laboratory work. Table-washing on a support pedestal made of metal LAB-M MO ME 150.60.90 PP Width: 1500 Depth: 600 Height: 900 Package contents: table top – a single module made of polypropylene Attention! It is not recommended to use it for work with oil and petroleum products (fuel oil, bitumen, etc.) The inner size of the bowl – 500*400*285 mm The base of the sink table is a metal support pedestal. All-welded frame painted with dark grey powder paint RAL 7011. The bottom and top of the housing are sheet steel painted with dark gray RAL 7011 powder paint, the side walls are made of sheet steel painted with white RAL 9016 powder paint. Facades – laminated MDF of white color with a thickness of 16 mm, ABS edging of dark gray color

Furniture for laboratory work. Washing table on a metal support stand LAB-M MD ME 120.65.90 PP Width, mm: 1200 Depth, mm: 650 Height, mm:900 Equipment: The table top is polypropylene with an overhead rim around the perimeter. Attention! It is not recommended to use 2 polypropylene Bowls for working with oil and petroleum products (fuel oil, bitumen, etc.) . Hanging bowl mounting The inner size of each bowl – 400*400*300 mm The base of the sink table is a metal support pedestal. All-welded frame painted with dark grey powder paint RAL 7011. The bottom and top of the housing are sheet steel painted with powder paint of dark gray RAL 7011, the side walls are made of sheet steel painted with powder paint of white RAL 9016. Facades – laminated MDF of white color with a thickness of 16 mm, dark gray ABS edging