Termeks

Four workstations with a diameter of 140 mm and a height-adjustable bottom allow the sample containers to be immersed in the coolant to the required depth. Overall dimensions 515x310x215 mm Weight 3.5 kg

It is designed for heating samples in chemical beakers, flasks or evaporation cups. It can be used for the determination of extracting substances in high-pressure polyethylene in accordance with GOST 26393. It can be used as a universal thermostat and used to maintain a set temperature of a liquid coolant circulating both in an internal bath and in external closed-type consumers. The operating temperature range is +20...+100 °C. Feed pump for external closed-type thermostating systems. Bath volume 18 l Overall dimensions 585x415x825 mm The open part of the bath is 360x260 mm Bath depth 150 mm Weight 23 kg Power consumption 2.2 kW.

It is intended for placement in the inner bath of the liquid thermostat VT25 or VT25-2 forms with samples when testing grouting cements in accordance with the State Standard 26798.2. Ventilation openings are nedeed for better convection of the coolant. Internal dimensions 290x250x140 mm Weight 2.5 kg

It is used for determining the pour point of petroleum products in accordance with GOST 20287 (method B).

It is used in determining the pour point of petroleum products in accordance with the State Standard 20287 (method B).

It is intended for thermostating samples in glasses, flasks and other laboratory utensils in cases where high accuracy of temperature maintenance is not required and good uniformity of the temperature field in the working volume is not needed. The operating temperature range is Current +5...+200 °C. Three workstations with a diameter of 110 mm with five steel O-rings, tripods and feet with a clip. Stamped steel bath with a volume of 8 liters and a depth of 110 mm. Bath volume 8 l Overall dimensions 515x585x660 mm The open part of the bath is 295x235 mm Bath depth 110 mm Weight 9 kg Power consumption 2.5 kW

It is used in determining the brittleness temperature of polyvinyl chloride plastic by express method in accordance with the State Standard 5960.

It is used in determining the flow temperature of petroleum products in accordance with GOST 20287 (method A). For testing, additional sets of devices BNTI 05 04 K and BNTI 05 04 3K are required

The thermometer sensor ExT-01/1 is made in the form of a thin detachable probe without an extension cable. The thermometer has an explosion protection marking 0Ex ia IIB T4 Ga X and can be used in explosive zones 0, 1 and 2 of any classes of premises and outdoor installations in which the formation of explosive mixtures of categories IIA, IIB is possible. • Measurement range -50...+130 °C The minimum immersion depth of the sensor is 75 mm Overall dimensions of the electronic unit 135x65x40 mm Electronic unit weight 0.3 kg

It measures the temperature, converts it into a digital code and transmits this code via the built-in RS 485 interface. The range is -50...+300 °C, resolution 0.01 °C, error ±0.1 °C. Weight 0.5 kg

It is used in determining the density of petroleum products, resins, plasticizers and other chemical products by hydrometers in stainless steel cylinders with a height of 300 mm and internal diameters of 60.5 and 73 mm.

It is used for determining the low-temperature characteristics of petroleum products in accordance with the State Standard 20287 (Method A), EN 23015 and ASTM D97