Termeks

A 900 mm high table with a 900×640 mm countertop. It is designed for long-term operation, the power frame does not contain aluminum and plastic parts in the fasteners. Overall dimensions of the external table 900x640x900 mm Overall dimensions of the inner table 600x400x900 mm

It is designed for thermostating samples in glasses, flasks and other laboratory utensils in cases when high accuracy of temperature maintenance is not required and good uniformity of the temperature field in the working volume is not needed. The operating temperature range is Current +5...+200 °C. Three workstations with a diameter of 110 mm with five steel O-rings, tripods and feet with a clip. Stamped steel bath with a volume of 11 liters and a depth of 160 mm. Bath volume 11 l Overall dimensions 515x585x710 mm The open part of the bath is 295x235 mm Bath depth 160 mm Weight 9.5 kg Power consumption 2.5 kW

It is designed for thermostating samples in glasses, flasks and other laboratory utensils in cases when high accuracy of temperature maintenance is not required and good uniformity of the temperature field in the working volume is not needed. The operating temperature range is Current +5...+200 °C. Three workstations with a diameter of 110 mm with five steel O-rings. Stamped steel bath with a volume of 8 liters and a depth of 110 mm. Bath volume 8 l Overall dimensions 355x310x335 mm The open part of the bath is 295x235 mm Bath depth 110 mm Weight 9 kg Power consumption 2.5 kW

The operating temperature range is +40...+200 °C. Stability and uniformity of temperature in the working bath is not worse than ± 0.01 °C Bath volume 14 l Overall dimensions 360x360x900 mm The open part of the bath is 90 mm Bath depth 520 mm Weight 35 kg Power consumption 2.2 kW

A small buffer bath with a volume of 4 liters. Feeding pump with magnetic coupling for external closed-type thermostating systems. Cooling capacity 300 W at +20 °C. Overall dimensions 275x440x350 mm Weight 26 kg Power consumption 1.2 kW

It is designed for convenient placement of the installation for cryoscopic determination of the molecular weight of CRYON 1.

A viton hose with an internal diameter of 10 mm is used to connect the VTi CRYO-VT series thermostats to external consumers or as a jumper hose. We recommend it for use with PMS heat carriers

It is designed for thermostating samples in glasses, flasks and other laboratory utensils in cases when high accuracy of temperature maintenance is not required and good uniformity of the temperature field in the working volume is not needed. The operating temperature range is Current +5...+200 °C. Two workstations with a diameter of 110 mm with five steel O-rings. Stamped steel tub with a volume of 7 liters and a depth of 160 mm. The volume of the bath is 7 liters Overall dimensions 385x205x360 mm The open part of the bath is 295x145 mm Bath depth 160 mm Weight 7.5 kg Power consumption 2.5 kW

The operation of the density meter is based on measuring the oscillation period of a hollow tube of the original configuration filled with the liquid under study, and then calculating the value of its density using the results of preliminary calibration for two substances of known density, for example, air and water. • Maximum viscosity of the measured liquid at ambient temperature 300 mm2/s The nominal volume of the measuring cell is 1.5 ml Measurement time of 2 channels 20 s • Temperature range of the built-in thermostat +15...+60 °C • • Overall dimensions 205x225x80 mm Weight 3 kg Power consumption 15 W

It is used to connect LT-300 thermometers to a personal computer via a USB interface. This is a "native" device for the ThermoChart program. The use of this adapter does not require the installation of additional drivers because it uses the HID driver built into the operating system to exchange data.

It is designed to maintain temperature when determining the kinematic viscosity of petroleum products with glass viscometers in accordance with GOST 33, GOST R 53708, ASTM D445, IP 71, ISO 3104 and DIN 51366 and when determining the pour point of petroleum products in accordance with GOST 20287. Operating temperature range -30...+50 °C Four places for glass viscometers or a basket for determining the pour point of petroleum products. Stability and uniformity of temperature in the working bath is not worse than ± 0.01 ° C. Bath volume 15 l Overall dimensions 440x710x620 mm The open part of the bath is 140x170 mm Bath depth 320 mm The size of the viewing window is 104x270 mm Weight 56 kg Power consumption 3.5 kW

It is designed to maintain the set temperature of the liquid coolant circulating in the inner bath. Welded stainless steel bath with a volume of 22 liters. The operating temperature range is -30...+150 °C. Overall dimensions 400x710x800 mm The open part of the bath is 120x210 mm Bath depth 500 mm Weight 60 kg Power consumption 3.5 kW.