Livam

The UPVD deionizer is suitable for enterprises, research centers and laboratories where type 2 water is required for laboratory analysis with an electrical conductivity of no more than 1.0 mcm/cm. Overall dimensions (LxWxH) 500×470×720 mm Weight 36.5 kg

The distillate cooler is installed directly on the body of the aquadistillator and provides cooling of the finished distillate from 80 ° C to 40 ° C.

The tank for the 1.3 kW aquadistillator is made of stainless steel.

The bracket for mounting the distiller provides the possibility of not only desktop, but also wall-mounted installation of the aquadistillator at the required height.

The tank for the 2.0 kW aquadistillator is made of stainless steel.

The tank for the 2.4 kW aquadistillator is made of stainless steel.

Purpose: obtaining distilled water of type 2 according to GOST R 58144-2018 "Distilled water", FS.2.2.0019.18 "Water for injection" Distillate capacity: 13.8 (-10%) l/h, bidistillate: 12.0 (-10%) l/h, Heating elements: 1st stage of distillation: Heating element 3.0 kW 220V (stainless steel) – 3 pcs., 2nd stage of distillation: Heating element 2.5 kW 220V (stainless steel) – 3 pcs. The quality of the produced water: GOST R 58144-2018 "Distilled water", FS.2.2.0019.18 "Water for injection" Type of current, frequency, voltage: alternating single-phase, 50 Hz, 380 V Power consumption: in the distillate production mode: 8.1 kW, in the bidistillate production mode: 15.3 kW. Overall dimensions (L×W×C), mm: 675×365×470 Weight: 30.0 kg Warranty period: 12 months from the date of sale Electrical conductivity of the produced water: bidistillate: 1.0-1.2 microns/cm, distillate: no more than 5.0 microns/cm The temperature of the produced water: distillate: from 70 to 85 ° C, bidistillate: no more than 40 ° C Source water consumption (at t of water 10 ° C) in the distillate production mode: 104.0 (±10%) l/h, in the bidistillate production mode: 240.0 (±10%) l/h The pressure of the source water is 0.1-0.4 MPa Version: Desktop with adjustable supports. Wall mounting is possible Coefficient of water purification from radionuclides: at least 4000 Service life: at least 8 years

Allows you to accumulate 60 liters of injection water. It is equipped with a heating and recirculation system, a temperature control meter, as well as special air bactericidal filters through which contact with the atmosphere is carried out. The automation system regulates the operation of the pump and heating elements and provides automatic shutdown of the distiller when filling the tank. It consists of 100% stainless steel, which allowed for a long service life. Overall dimensions (LxWxH) 1015×510×1100 mm Weight 47 kg

Designed for collecting, storing and distributing purified water obtained by various purification methods, with a capacity of 300 liters and 100% stainless steel, which allowed for a long service life. Dimensions in terms of 805x780 mm Weight 31 kg

Purpose: obtaining distilled water of 3 types according to GOST R 58144-2018 "Distilled water", FS.2.2.0020.18 "Purified water" Capacity: 70.0 (-10%) l/h Heating elements: electrodes The quality of the produced water: GOST R 58144-2018 "Distilled water", FS.2.2.0020.18 "Purified water" Type of current, frequency, voltage: alternating three-phase, 50 Hz, 380 V Power consumption: 42.0 kW Overall dimensions (L×W×C), mm: 740×550×1010 Weight: 64 kg Warranty period: 14 months from the date of sale Registration certificate for a medical device No. FSR 2008/03707 dated December 05 , 2008 Electrical conductivity of the produced water: 3-4.5 microns/cm The temperature of the produced water: 50 °C Source water flow rate (at 10 °C water temperature): 500 (+-10%) l/h Source water pressure: 0.1-0.4 MPa Overall dimensions of the control unit (L×W×C), mm: 400×220×500 Execution: outdoor Coefficient of water purification from radionuclides: at least 4000 Service life: at least 8 years

Designed for collecting, storing and distributing purified water obtained by various purification methods, with a capacity of 240 liters and 100% stainless steel, which allowed for a long service life. Dimensions in terms of 690x660 mm Weight 24 kg

Designed for collecting, storing and distributing purified water obtained by various purification methods, with a capacity of 60 liters and 100% stainless steel, which allowed for a long service life. Dimensions in terms of 450x500 mm Weight 8.1 kg