MiniMed

It is intended for painting blood smears or other biological preparations on slides - slides by the group method (slides are placed in holders) according to a given technological program in diagnostic and research laboratories. Cassettes with fixed slides successively go through 5 working stages: 1) Pre-drying of freshly prepared preparations; 2) Fixation with pre-painting; 3) Basic coloring; 4) Flushing; 5) Drying. The cassettes are moved to the next position by the forward-return movement of the trays. The time of each stage is the same. It can be set when ordering the device. Factory setting – 5 minutes. The total duration of all stages is 20 minutes. The coloring process is carried out along a linear trajectory. Slides with a smear should be placed in special cassettes and fixed by turning the eccentric lever. Fill the baths with reagents and install them in the device at the specified places. Place the slide cassette on the pre-drying starting position. If the preparations are dry, the cassette with slides should be immediately placed in a bath with a retainer. The time of each stage is 5 minutes. The whole procedure of painting and drying takes no more than 20 minutes. With sequential installation, the device can process up to 12 cassettes, i.e. up to 120 slides per hour.

It is intended for taking and storing samples of biological material for the purpose of safe transportation to the laboratory for analysis. It is convenient for taking flushes, including sanitary ones. Non-sterile.

Designed for use in the Kjeldahl apparatus used to determine nitrogen. Variants: 1-100-14/23 TS 1-100-19/26 TS 1-1000-29/32 TS 1-250-19/26 specifications 9464-019-29508133-2015, TS 1-50-14/23 TS 1-500-29/32 specifications 9464-019-29508133-2015, TS

The pipettes are serological, disposable, made of crystalline polystyrene. Sterilized by gamma radiation. The color marking encodes the corresponding denomination according to international standards. Pipettes are apyrogenic, do not have hemolytic and cytoxic effects. The calibration on the pipettes is applied with black, abrasion-resistant paint. Pipettes of all denominations have a negative overflow scale, continuing the main scale.

Designed for hydrometry. Without a scale. Made of glass HS1 according to GOST 21400-75.TU 4320-012-29508133-2009

The potassium salt of ethylenediaminetetraacetic acid (EDTA) is the preferred anticoagulant for hematological studies. Gel is a special material designed to form a stable barrier between the cellular components of blood and serum during centrifugation. Material for research............... EDTA-blood, plasma Scope of application............................ hematological examination of whole blood

It is intended for taking samples of biological material, with the possibility of their subsequent safe transportation to the laboratory for analysis. Non - sterile

The walls of the tubes are coated with a dry clot formation activator (silicon dioxide) to accelerate blood clotting. Mixing blood with it does not affect the result of tests. The acceleration of the blood clotting process significantly reduces the preparation time of the biological sample. Material for research............... blood serum Scope of application............................ blood serum research in biochemistry, immunology Centrifugation................................ 1000 - 1500 g - 10 minutes

The tube is conical without a "skirt" of stability, designed for centrifugation of biological and other liquids. The test tube is closed with a screw cap. The divisions are applied with white paint. There is also a field for recording. The conical tube is made of polypropylene, which allows it to be autoclaved in standard mode.

The pipettes are serological, disposable, made of crystalline polystyrene. Sterilized by gamma radiation. The color marking encodes the corresponding denomination according to international standards. Pipettes are apyrogenic, do not have hemolytic and cytoxic effects. The calibration on the pipettes is applied with black, abrasion-resistant paint. Pipettes of all denominations have a negative overflow scale, continuing the main scale.

The tripod is made of aluminum, which allows them to be sterilized at any temperature; this material provides lightness and durability. It can be used in water baths. The tripod has an individual packaging. Designed for storing test tubes.

The potassium salt of ethylenediaminetetraacetic acid (EDTA) is the preferred anticoagulant for hematological studies. Material for research............... stabilized EDTA whole blood /EDTA plasma.