Glassware

Desiccator 2-210 mm Primelab is designed to isolate the contents from the external environment and protect from moisture due to the missing tap. Protects the contents from direct exposure to ultraviolet rays due to the fact that the desiccator is made of dark glass. Main advantages: • Robust and reliable design; • Ease of use; • Precise regulation of storage conditions. Dimensions: desiccator diameter is 210 mm with a height of 275 mm

Desiccator 2-180 mm PrimeLab is made of dark glass, which provides reliable protection of the contents from harmful ultraviolet radiation. Designed to store and protect samples in a laboratory environment. It is also possible to achieve 0% air humidity, which is important when working with certain reagents. The diameter of the desiccator is 18 cm with the height of the entire vessel being 26 cm. It comes complete with a porcelain ring, which is placed at the bottom to circulate air throughout the entire container in isolated conditions.

Flat-bottomed flask P-2-500-34 Primelab is an indispensable product for conducting various chemical and biological studies. It has the shape of a ball with a flat bottom, which allows you to use the flask without a special stand. At the same time, all the advantages of spherical flasks are preserved: from uniform heating to complete mixing of reagents. A flat-bottomed flask P-2-500-34 Primelab is designed to be 500 ml with a height of the entire product of 170 ± 40 mm. The diameter of the entire ball is approximately 105 mm ± 20 mm with a neck diameter of 34 mm.

A 250 ml reagent bottle made of light glass with a wide neck and a ground-in stopper PrimeLab is a reliable container for storing, transporting or mixing substances of different consistencies. Thanks to the wide neck (5 cm), bulk substances and liquid reagents can be easily placed into it. The total height is 13 cm with a base diameter of 7 cm. The ground stopper included is suitable for firmly closing the container, which will protect the contents from leakage and evaporation. The bottle is made of borosilicate glass 3.3, so it can be sterilized in different ways for reusable use.

Alonge AO-29/32-14/23-90 TS was manufactured by Primelab in accordance with GOST 25336-82. Simax borosilicate glass was used, which does not absorb odors, does not react with contact substances and is resistant to high temperatures. Has a long service life due to the strength of the glass. Technical characteristics of the AO-29/32-14/23-90 Primelab allonge: • Diameter – 9 mm • Height to outlet is 55 mm with a total length of 90 mm • Coupling section size – 14/23 • Core section size – 29/32 . Primelab offers glassblowing services, namely the production of laboratory glassware according to drawings and technical specifications for the customer.

Flat-bottomed flask P-1-2000 29/32 Primelab is actively used as a reaction or receiving vessel due to its ground section measuring 29/32 and diameter 166 mm, spherical shape and thermal stability. Suitable for working with aggressive and toxic substances, the volume of which does not exceed 2 liters. The height of the entire product is 250 mm.

A 30 ml light glass reagent bottle with a narrow neck and a ground-in PrimeLab stopper is made of 3.3 borosilicate glass. Chemically stable, does not react with chemically active substances. The ground-in stopper not only securely closes the bottle, but also protects the contents from leakage and evaporation. Characteristics: • Volume – 30 ml • Base diameter – 40 mm • Throat diameter – 18 mm • Height – 76 mm.

The washing bottle with the nozzle SN-1-100 was manufactured by Primelab in accordance with GOST 25336-82. Made from thermally stable borosilicate glass, which is resistant to intensive use and wear. Has a long service life. Suitable for handling chemicals and autoclave sterilization. The washing bottle with the nozzle SN-1-100 is used for washing various equipment. The nozzle has several special holes for equal distribution of liquid. You can order washing bottles with a nozzle CH-1-100 from Primelab in any quantity. At the same time, impeccable quality of products is guaranteed.

Bourdon vessel, version 2. Made of borosilicate glass.

Flask KN-2-1000-42 PrimeLab is an indispensable laboratory accessory used for heating, cooling, mixing, storage and other laboratory processes. Made from heat-resistant laboratory glass, resistant to high temperatures and chemically active substances. The transparency of the glass makes it possible to observe all the processes occurring inside the flask. Characteristics: • Height - 220 mm • Base diameter - 131 mm • Neck diameter - 42 mm • Volume - 1000 ml.

The PrimeLab water jet pump is a simple but effective laboratory device for pumping air from an evaporator, reactor and other equipment, as well as creating a vacuum without connecting to an electrical network. For operation, the use of water supply is sufficient. The pump is made of tempered heat-resistant glass, which ensures a long service life in the absence of serious mechanical damage. At the top of the pump there is a tube to which a soft hose is attached. Through it, water enters the water jet pump. There is a drain pipe at the bottom through which the water drains. A device is connected to the side tube in which it is necessary to pump out the air.

The Tishchenko Primelab flask for flushing gases through liquid has a non-standard design. Two outlets with olives at the ends are soldered into the outer part, which provide a strong connection with the hoses. There is a partition in the middle of the container. It is thanks to this form that the quality of gas purification is improved. The main purpose of the bottle is washing, cleaning and drying gases. The Tishchenko flask was made by the Primelab company from borosilicate glass, which has a fairly long service life even with intensive use.