Catalog
Back to search results
Explosion-proof vacuum electric furnace START-25
Back to search results
Explosion-proof vacuum electric furnace START-25
Vacuum resistance furnaces are necessary for heating products before pressure treatment, for sintering, degassing, quenching, annealing, soldering and chemical-technological processes. Such furnaces among all the variety of thermal equipment are considered the most environmentally friendly – heat treatment is carried out at t up to +2500 ° C in a purified vacuum. Under certain conditions, vacuum furnaces are used to work with neutral gases.
The outer part of the furnace is made of stainless steel and is cooled by liquid. The inner part of the working chamber, where the heat treatment of materials is carried out, is made of an alloy of molybdenum and tungsten. The components are characterized by a low inertia force, reduced gas separation. The settings are available on the control panel, where the instruments, automatic and manual control switches are located.
At every enterprise of the electronic industry, nuclear power, an explosion-proof vacuum resistance furnace is needed. The same applies to areas where various products undergo heat treatment at the stage of production and preparation for use.
The outer part of the furnace is made of stainless steel and is cooled by liquid. The inner part of the working chamber, where the heat treatment of materials is carried out, is made of an alloy of molybdenum and tungsten. The components are characterized by a low inertia force, reduced gas separation. The settings are available on the control panel, where the instruments, automatic and manual control switches are located.
At every enterprise of the electronic industry, nuclear power, an explosion-proof vacuum resistance furnace is needed. The same applies to areas where various products undergo heat treatment at the stage of production and preparation for use.
High temperature vacuum compression furnace SNVS-30/16-I6-D3
High-temperature furnaces are capable of heating materials up to 1700 degrees. The scope of their application covers the heat treatment of various materials in an inert medium or vacuum. TULA-TERM furnaces are used for heat treatment of plastics, ceramics, metals, alloys, lacquers and other materials. The equipment allows sintering, annealing, soldering, quenching, drying, burning and molding. In industry, our installations are most often used for quenching parts and sintering hard alloys.
Tula-Term
Tula
Produced in: Tula
Vacuum electric furnace for sintering of the type VS-16—22-Z
Pump protection is provided; minimal modification of the heating unit permits to use the furnace as a furnace for silicification of graphite products
VakETO
Mosrentgen
Produced in: Moscow
SNVS Vacuum Furnace-3.3/12- I2
High-temperature furnaces are capable of heating materials up to 1700 degrees. The scope of their application covers the heat treatment of various materials in an inert medium or vacuum. TULA-TERM furnaces are used for heat treatment of plastics, ceramics, metals, alloys, lacquers and other materials. The equipment allows sintering, annealing, soldering, quenching, drying, burning and molding. In industry, our installations are most often used for quenching parts and sintering hard alloys.
Tula-Term
Tula
Produced in: Tula
Chamber vacuum furnace SNVS-90/10-I2
High-temperature furnaces are capable of heating materials up to 1700 degrees. The scope of their application covers the heat treatment of various materials in an inert medium or vacuum. TULA-TERM furnaces are used for heat treatment of plastics, ceramics, metals, alloys, lacquers and other materials. The equipment allows sintering, annealing, soldering, quenching, drying, burning and molding. In industry, our installations are most often used for quenching parts and sintering hard alloys.
Tula-Term
Tula
Produced in: Tula
Induction vacuum electric furnace IVP-1-22
a massive copper mold was used in the furnace, as well as a printed crucible made of stabilized (calcium oxide) zirconium dioxide. The furnace has been working for several years at one of the non-ferrous metallurgy enterprises in the production of platinum ingots according to GOST
VakETO
Mosrentgen
Produced in: Moscow
SNVS Vacuum Furnace-3.3/17- I2-2VO
High-temperature furnaces are capable of heating materials up to 1700 degrees. The scope of their application covers the heat treatment of various materials in an inert medium or vacuum. TULA-TERM furnaces are used for heat treatment of plastics, ceramics, metals, alloys, lacquers and other materials. The equipment allows sintering, annealing, soldering, quenching, drying, burning and molding. In industry, our installations are most often used for quenching parts and sintering hard alloys.
Tula-Term
Tula
Produced in: Tula
Specialized vacuum electric furnace VP-575-13
Specialized vacuum electric furnace for high-temperature soldering of large-sized products
VakETO
Mosrentgen
Produced in: Moscow
Vacuum electric furnace VZG-260-14
Vacuum electric furnace for heat treatment with accelerated cooling and precision soldering
VakETO
Mosrentgen
Produced in: Moscow
Vacuum Drying cabinet APU-30-6- Ah
B – vacuum, Su – for drying, 30 – the volume of the working space in dm3, 6 – the maximum operating temperature divided by 100, i.e., 600 ° C, A – the furnace is equipped with an adsorber
VakETO
Mosrentgen
Produced in: Moscow
Mine vacuum furnace SNVS-6.5/12.5- I4
High-temperature furnaces are capable of heating materials up to 1700 degrees. The scope of their application covers the heat treatment of various materials in an inert medium or vacuum. TULA-TERM furnaces are used for heat treatment of plastics, ceramics, metals, alloys, lacquers and other materials. The equipment allows sintering, annealing, soldering, quenching, drying, burning and molding. In industry, our installations are most often used for quenching parts and sintering hard alloys.
Tula-Term
Tula
Produced in: Tula
SNVS Vacuum Furnace-3.3/15- I6
High-temperature furnaces are capable of heating materials up to 1700 degrees. The scope of their application covers the heat treatment of various materials in an inert medium or vacuum. TULA-TERM furnaces are used for heat treatment of plastics, ceramics, metals, alloys, lacquers and other materials. The equipment allows sintering, annealing, soldering, quenching, drying, burning and molding. In industry, our installations are most often used for quenching parts and sintering hard alloys.
Tula-Term
Tula
Produced in: Tula
Specialized vacuum electric furnace for annealing VOZH-2,5-25
B – vacuum; The coolant furnace is designed for annealing; 2.5 – the volume of the working space in dm3; 25 – the maximum operating temperature divided by 100, i.e., 2500 ° C
VakETO
Mosrentgen
Produced in: Moscow
Vacuum distillation electric furnace of resistance VD-300-16
Distillation by the aluminothermic method
VakETO
Mosrentgen
Produced in: Moscow
Chamber low-temperature electric furnace with a retractable hearth-8.16.5/5,0- I2-In
Designation
SNOT-8.16.5/5,0- I2-In
Tula-Term
Tula
Produced in: Tula
Laboratory electric furnace CHO-10
from
153 403 ₽
Designation
SNO-10
Volume, l
10
The material of the working chamber
is ceramic
Heating
4 sides
Power consumption, W, max
4500
Minimum operating temperature, 0C
100
Tula-Term
Tula
Produced in: Tula
Furnace for melting lead SHS(G)-7.5/5.5
from
2 178 000 ₽
Designation: SHS(G)-7.5/5.5
Supply voltage, V: 380
Power, kW: 40/7
Maximum temperature, °C: 550
Useful size, mm: 720x520
Tula-Term
Tula
Produced in: Tula
Furnace for heating in a protective environment CHO (3)-40/11
from
1 493 400 ₽
Designation
SNO(H)-40/11
Power, kW, no more
than 8
Supply network voltage, V
380
Frequency, Hz
50
Tula-Term
Tula
Produced in: Tula
Laboratory shaft furnace SSHOL-3/11
from
128 462 ₽
Designation
SSHOL-3/11
Supply voltage,
220 ± 10%
Network frequency, Hz
50
Power consumption, W, max
2500
Tula-Term
Tula
Produced in: Tula
Shaft furnace industrial SSHO-4.12/11
Designation
SSO-4.12/11
Power, kW
50
Diameter, mm
400
Height, mm
1200
Tula-Term
Tula
Produced in: Tula
Laboratory electric furnace CHO-3
from
108 590 ₽
Designation
SNO-3
Volume, l
3
The material of the working chamber
is ceramic
Heating
4 sides
Power consumption, W, max
2500
Minimum operating temperature, 0C
100
Tula-Term
Tula
Produced in: Tula
Laboratory electric furnace CHO-27
from
291 875 ₽
Designation
SNO-27
Volume, l
27
Material of the working chamber
ceramics
Heating
4 sides
Power consumption, W, max
8000
Minimum operating temperature, 0C
100
Tula-Term
Tula
Produced in: Tula
High temperature vacuum compression furnace SNVS-30/16-I6-D3
High-temperature furnaces are capable of heating materials up to 1700 degrees. The scope of their application covers the heat treatment of various materials in an inert medium or vacuum. TULA-TERM furnaces are used for heat treatment of plastics, ceramics, metals, alloys, lacquers and other materials. The equipment allows sintering, annealing, soldering, quenching, drying, burning and molding. In industry, our installations are most often used for quenching parts and sintering hard alloys.
Tula-Term
Tula
Produced in: Tula
Laboratory electric furnace CHO-40
from
347 688 ₽
Designation
SNO-40
Volume, l
40
The material of the working chamber
is ceramic
Heating
4 sides
Power consumption, W, max
10000
Minimum operating temperature, 0C
100
Tula-Term
Tula
Produced in: Tula
High Temperature laboratory furnace CHO 64/17
from
4 256 736 ₽
Designation
SNO 64/17
Rated power Pmax, kW
18
Power supply voltage U, In 3 phases + N+PE
380
Maximum operating temperature T slave, oS
1700
Tula-Term
Tula
Produced in: Tula
SNVS Vacuum Furnace-3.3/12- I2
High-temperature furnaces are capable of heating materials up to 1700 degrees. The scope of their application covers the heat treatment of various materials in an inert medium or vacuum. TULA-TERM furnaces are used for heat treatment of plastics, ceramics, metals, alloys, lacquers and other materials. The equipment allows sintering, annealing, soldering, quenching, drying, burning and molding. In industry, our installations are most often used for quenching parts and sintering hard alloys.
Tula-Term
Tula
Produced in: Tula
Chamber low-temperature electric furnace with retractable hearth SNOT 14.20.15/6.2
from
2 938 000 ₽
The chamber furnace with digital control SNOT 14.20.15/6.2 is designed for firing products and heat treatment of metals.
Tula-Term
Tula
Produced in: Tula
Vacuum firing furnace SNVS-400/7,0
The vacuum furnace of the mine type SNVS-400/7.0 with top loading and pneumatic lid opening is designed for firing copper and other materials at temperatures up to 700 ° C and high vacuum up to -5 ·10-4 (6.67·10-5) mmHg (kPa).
A technological platform with a ladder is provided for convenient operator access to the furnace.
The mechanism of opening / closing the lid is provided by two pneumatic cylinders with pneumatic locks in the air line.
A lifting platform is provided for loading coils into the furnace using an electric hoist. The design consists of a traverse, a stainless steel pipe and a perforated disc with a hook for suspension.
Tula-Term
Tula
Produced in: Tula
Chamber vacuum furnace SNVS-90/10-I2
High-temperature furnaces are capable of heating materials up to 1700 degrees. The scope of their application covers the heat treatment of various materials in an inert medium or vacuum. TULA-TERM furnaces are used for heat treatment of plastics, ceramics, metals, alloys, lacquers and other materials. The equipment allows sintering, annealing, soldering, quenching, drying, burning and molding. In industry, our installations are most often used for quenching parts and sintering hard alloys.
Tula-Term
Tula
Produced in: Tula
Furnace for heating in a protective environment CHO (3)-6/12.5
Designation
SNO(H)-6/12.5
Power, kW, no more
than 8
Supply network voltage, V
380
Frequency, Hz
50
Tula-Term
Tula
Produced in: Tula