measurements of the reference measure of the noise temperature unit of nominal
values (81 ± 2) K and (293 ± 10) K in the frequency range
from 2 to 40 GHz.
Designed for:
use as the primary reference of the spectral power of the noise radio emission SPMSH in the frequency range 140-220 GHz;
use as a source of noise signal in the mm wavelength range for use with radio equipment;
measuring the noise coefficient of receivers, amplifiers, for tuning and adjusting electronic devices.
High sensitivity
Sound, light and visual alarm of exceeding the set threshold levels
The possibility of using both stationary and wearable versions
A wide range of measurements
Technical specifications:
Maximum load (torque): 30 N·m
Maximum twisting angle: 50000°
The discreteness of the twisting angle: 0.01°
Twisting angle error: ±0.1°
Torque discreteness: 0.001 N·m
Relative error of torque measurement: no more than 1% in the measurement range from 0.6 to 30 Nm
Torque measurement error: no more than 0.01 N·m in the measurement range from 0 to 0.6 N · m
Maximum rotation speed: 10 rpm
Weight: 150 kg
Overall dimensions (length x width x height): 1000 x 500 x 500 mm
Diameter of the universal testing device: 80 mm
Maximum spring length: 300 mm or more
General monitoring of contamination of various objects with radioactive substances in the counting rate mode, with the possibility of separate measurement of the alpha particle flux density and beta particle flux density, as well as the gamma radiation dose rate
A wide range of measurements
The possibility of using an extension rod
The measurement range is -50...+300 °C.
Up to +200 °C resolution 0.01 °C, error ±0.05 °C (Class C according to ASTM E2877).
The minimum immersion depth of the sensor is 75 mm
Overall dimensions of the electronic unit 75x80x35 mm
Weight 0.2 kg