Furniture

The permissible distributed load on the table is up to 250 kg. 1. LK-900 SN (chipboard) Width – 900 CPL- 32 370 ₽ CERAMICS- 33 720 ₽ GRANTEC- 40 710 ₽ STAINLESS STEEL. STEEL- 43 010 ₽ LAB HPL- 41 750 ₽ 2. LK-900 SN (steel) Width – 900 CPL- 40 280 ₽ CERAMICS- 41,630 ₽ GRANTEC- 48 620 ₽ STAINLESS STEEL. STEEL- 50,920 ₽ LAB HPL- 49 660 ₽ 3. LK-1200 SP (chipboard) Width – 1200 CPL- 37 740 ₽ CERAMICS- 39,900 ₽ GRANTEC- 48 750 ₽ STAINLESS STEEL. STEEL- 51,680 ₽ LAB HPL-50 970 ₽ 4. LK-1200 SP(steel) Width – 1200 CPL- 47 620 ₽ CERAMICS- 49,780 ₽ GRANTEC- 58 630 ₽ STAINLESS STEEL. STEEL- 61,560 ₽ LAB HPL-60 850 ₽ 5. LK-1500 SP (chipboard) Width – 1500 CPL- 44 300 ₽ CERAMICS- 46,680 ₽ GRANTEC- 58 240 ₽ STAINLESS STEEL. STEEL-61 710 ₽ LAB HPL-60 600 ₽ 6. LK-1500 SP(steel) Width – 1500 CPL- 56 540 ₽ CERAMICS- 58,920 ₽ GRANTEC- 70 480 ₽ STAINLESS STEEL. STEEL- 73,950 ₽ LAB HPL-72 840 ₽ 7. LK-1800 SP (chipboard) Width – 1800 CPL- 51 260 ₽ CERAMICS- 53 180 ₽ GRANTEC- 67 720 ₽ STAINLESS STEEL. STEEL- 71 560 ₽ LAB HPL-70 030 ₽ 8. LK-1800 SP(steel) Width – 1800 CPL- 64 120 ₽ CERAMICS- 66 040 ₽ GRANTEC- 80 580 ₽ STAINLESS STEEL. STEEL- 84 420 ₽ LAB HPL-82 890 ₽

BASIC EQUIPMENT Working box front guide posts – aluminum profile painted with powder paint (RAL 7035/RAL 5023), in the right rack there are a light switch and 2 splash–proof sockets with a 3.2kW cover (IP54) the front anti-spill side is acid-resistant polished stainless steel. AISI 304 steel rear, upper, side panels – metal painted with powder paint (RAL 7035) with the texture of shagreen leather 2 dependent lifting screens – tempered glass in aluminum frames, lifting 0-780mm, do not change the dimensions of the cabinet when lifting the upper fixed screen – tempered glass in an aluminum frame on the top panel: 4 anti-explosion the valve lamp LED dust– and moisture-proof (2X10W IP65) is separated from the working space by tempered glass with a thickness of 4mm flange d=250mm (the distance from the back panel to the center of the flange is 170mm) switching box with automatic emergency power off 16A easily removable exhaust visors 3 levels of exhaust on the rear panel: 4 holes d =22mm with plugs made of stainless steel for installing additional pipes or taps technological hole d=50mm with a plastic plug counterweights are placed in the front pillars-pylons and are easily serviced Frame base metal frame with a pedestal, painted with powder paint (RAL 7035) with a texture of shagreen leather: double metal facades with a noise damper, opening angle 270° handles – polypropylene 4 compartments with locks 2 shelves with the possibility of installation on three levels in any of the compartments 2 flanges d=100mm service panel – metal box painted with powder paint (RAL 5023) with the texture of shagreen leather: adjustable supports

The arrangement of the locker room is required both in factories, laboratories and other production sites, and fitness centers. Two main requirements are most often applied to lockers – durability and aesthetics, which directly affect the mood of employees or visitors. Choose really high–quality furniture for your organization - it's not difficult with Simple PRO. Width - 400

EQUIPMENT rack support racks – aluminum profile painted with powder paint (RAL 1001) top panel with a depth of 190mm – metal painted with powder paint (RAL 1001)

The NV-1210 LCn is a laboratory table with a metal frame and a table top made of monolithic ceramics. Table top width: 1210 mm. The table is designed for sitting work, its height is 750 mm (this is the height of a regular office desk). The table top made of monolithic ceramics is moisture-resistant, perfectly withstands high temperatures. As there are no seams, ceramic granite tiles are better resistant to chemicals and heat. It is possible to place high-temperature equipment on it. NV-1210 tables have a metal frame painted with durable powder paint. The side laminated panels (chipboard 16 mm thick) are edged on the facade with a PVC edge 2 mm thick, which increases their impact resistance and mechanical strength. The legs of the table are adjustable in height within two centimeters, allowing you to place it even on a rather uneven floor. Dimensions of the table assembled (W×D×H): 1210×700×750 mm. Advantages of NV-1210 LCn tables An inexpensive solution for laboratories that value the reliability and durability of furniture; Suitable for small rooms; Heating plates or baths can be placed on the porcelain stoneware surface resistant to high temperatures; It is convenient to work sitting down: the height of the work surface from the floor is 75 cm. Application of NV-1210 LCn tables Tables of the NV series are used in laboratories of the widest profile: at food and light industry enterprises, in scientific and educational workshops, in chemistry classrooms, quality control centers, medical organizations and many others.

Kors NV-1200 SHV-NERZH laboratory fume hoods are single—frame cabinets with a width of 1100 mm with a stainless steel countertop. External dimensions of the cabinet (W×D×H): 1100×700×1960 mm. Dimensions of the working area (W×D×H): 1068×540×750 mm. Table top: stainless steel. Convenient fume hoods for comfortable work in the laboratory Working surface material: stainless steel. It is well suited for biological or medical laboratories, but it is better not to use it in chemical laboratories. It is resistant to prolonged exposure to temperature, organic solvents, and oils. It has limited resistance to short-term exposure to concentrated mineral acids and alkalis and is destroyed by prolonged exposure to concentrated acids. The working area is closed by one lifting frame with a counterweight. It has two exhaust zones: the hood of the exhaust box and the level of the countertop. Diameter of the flange for connection to the ventilation system: 150 mm. Working area size (W×D×H): 1068×540×750 mm. Please note that the cabinet narrows upwards. At a height of 50 cm, the depth of the working area will be 410 mm, at a height of 70 cm: 365 mm. If you need to place high equipment, then make sure that it corresponds to the dimensions of the camera, otherwise you will not be able to close the cabinet. The height of the raised glass above the cabinet: 510 mm, that is, with the glass raised, the total height of the cabinet will be 2470 mm. The working area is illuminated by an LED lamp (included in the package). The switch is located on the right side of the cabinet, next to the sockets. The fume cupboard is equipped with two sockets, one of them with grounding. Sockets have the IP20 degree of protection, maximum load: 1.5 kW. The base of the cabinet is an all-welded metal frame in powder coating. The side laminated panels (chipboard with a thickness of 16 mm) are edged with a durable PVC edge with a thickness of 2 mm, which increases their impact resistance and mechanical strength. The cabinet legs are adjustable in height within two centimeters, allowing you to place the cabinet even on a rather uneven floor.

The sink is suitable for working with acids and alkalis, including concentrated inorganic ones. It has a very high chemical resistance. The large depth of the sink makes it possible to conveniently wash high laboratory utensils (measuring cylinders, burettes, etc.) The mixer is equipped with two tips (narrow / wide jet of water). The sink is installed below the level of the work surface for ease of operation. 1. LK-600 SMS-PV (1 sink, 1 mixer) Width - 600 POLYPROPYLENE- 65,000 ₽ 2. LK-900 SMS-PV (1 sink, 1 mixer) Width - 900 POLYPROPYLENE- 75 640 ₽ 3. LK-1200 SMS-PV (1 sink, 1 mixer) Width - 1200 POLYPROPYLENE- 86 650 ₽ 4. LK-1200 SMS-PV (2 sinks, 1 mixer) Width - 1200 POLYPROPYLENE- 97 040 ₽ 5. LK-1500 SMS-PV (1 sink, 1 mixer) Width - 1500 POLYPROPYLENE- 97 270 ₽ 6. LK-1500 SMS-PV (2 sinks, 1 mixer) Width - 1500 POLYPROPYLENE- 107 650 ₽

The NV-1000 MOP-B is a large table with a deep sink made of polypropylene and without a dryer. It is designed for standing work: its height is 85 cm. Dimensions when assembled (W×D×H): 1000×600×850 mm. The table top is made of laminated chipboard. It has a built-in Stegler WJH0357F polypropylene sink, its internal dimensions (W×L×H): 490×390×290 mm. The polypropylene is moisture-resistant, resistant to prolonged exposure to concentrated acids, alkalis and organic solvents and is excellent for washing laboratory dishes. The package includes a stainless steel mixer with flexible 300 mm tap connectors and a siphon. The side laminated panels of the table (chipboard 16 mm thick) are edged on the facade with a 2 mm PVC edge, which increases their impact resistance and mechanical strength. The legs of the table are adjustable in height within two centimeters, allowing you to place it even on a rather uneven floor. Advantages of NV-1000 MOSFET-B tables A wide table with polypropylene sink. An inexpensive solution for laboratories that value the reliability and durability of furniture. Polypropylene sink is resistant to prolonged exposure to concentrated acids, alkalis and organic solvents. Application of NV-1000 MOPB tables Tables of the NV series are used in laboratories of the widest profile: at food and light industry enterprises, in scientific and educational workshops, in chemistry classrooms, quality control centers, medical organizations and many others.

Furniture for laboratory work. Exhaust cabinet made of chipboard Working surface: VITE 16mm Overall dimensions: Length, mm: 1200 Depth, mm: 740 Height, mm: 2100 equipment Working box front anti–spill side - acid–resistant polished stainless steel AISI 316 housing - white chipboard with a thickness of 16mm guide posts – aluminum profile painted with powder paint dark gray (RAL 7011) 2 dependent lifting screens – tempered glass in aluminum frames, lifting 0-710mm, do not change the dimensions of the cabinet when lifting.

Suitable for comfortable seating at tables from 750 to 900 mm high. It is possible to replace the standard gas lift with a high one, which will allow changing the height adjustment range of the chair from 570 to 820 mm and using such a stool to work at tables above 900 mm. The permissible load on the product should not exceed 120 kg. The seat diameter is 340 mm.

Furniture for laboratory work. Washing table on a metal support stand LAB-M MO13 ME 80.60.90 SS Width, mm: 800 Depth, mm: 600 Height, mm: 900 equipment: The table top is a single module made of SUS 201 stainless steel (analogous to AISI 201). Attention! The product is recommended to be used only for work with non-aggressive substances. For work with various reagents, in addition to mineral acids, it is recommended to use washing tables made of AISI 304 stainless steel. Inner bowl size – 340*400* 130mm The base of the sink table is a metal support pedestal. The lower part is an all–welded frame painted with dark gray RAL 7011 powder paint. The bottom and top of the housing are sheet steel painted with powder paint of dark gray RAL 7011, the side walls are made of sheet steel painted with powder paint of white RAL 9016. Facades – laminated MDF of white color with a thickness of 16 mm, dark gray ABS edging Without shelves