Laboratory work table low LAB-PRO SLn 90.65.75 KG-ESS

Furniture for laboratory work. Mobile table Table top: Laminate Length, mm: 800 Depth, mm: 600 Height, mm: 800 The complete set of the shelf at a distance of 250mm from the floor is melamine with a thickness of 16mm all–welded frame made of a rectangular metal profile painted with white powder paint roller supports h = 60mm (without stopper)

BASIC EQUIPMENT The base is a collapsible frame made of rectangular steel profile, painted with powder paint (RAL 7035) with the texture of shagreen leather Hidden fasteners Two easily removable rear screens (RAL 7035) and one non-removable (RAL 5023) Rear side boxes Adjustable supports (0-40 mm)

BASIC EQUIPMENT The base is a collapsible frame made of rectangular steel profile, painted with powder paint (RAL 7035) with the texture of shagreen leather Hidden fasteners Two easily removable rear screens (RAL 7035) and one non-removable (RAL 5023) Rear side boxes Adjustable supports (0-40 mm)

Laboratory work desk Table top: KG (porcelain stoneware) Length, mm: 1200 Depth, mm: 650 Height, mm: 900 BASIC EQUIPMENT The base is a collapsible frame made of rectangular steel profile, painted with powder paint (RAL 7035) with the texture of shagreen leather Hidden fasteners Two easily removable rear screens (RAL 7035) and one non-removable (RAL 5023) Adjustable supports (0-40 mm)

NV-1200 PX are wall-mounted tables with plumbing and superstructure in the NV line. The table top is 70 cm deep and 121.8 cm wide. A lamp and two sockets are built into the superstructure. It is designed for standing work: the height of the table top is 85 cm. External dimensions of the table (W×D×H): 1218×700×1650 mm. Work surface for your tasks We offer tables with various work surfaces. Table Model: Tabletop NV-1200 PLH: Laminate. It is relatively moisture-resistant, resistant to short-term exposure to acids, alkalis and organic solvents. This countertop does not tolerate strong heating or prolonged exposure to solvents, concentrated acids and alkalis. NV-1200 PKH: Porcelain tile. It is a practical solution for most chemical, biological, medical laboratories and workshops. You can put drying cabinets, baths and other heating devices on it. NV-1200 PSPH: Chemically resistant plastic. It is a good choice for training workshops, analytical and medical laboratories. It does not tolerate high temperatures well, heating devices should not be placed on the surface. NV-1200 PPX: Polypropylene. It is chemically resistant, beind a specialized solution for chemical laboratories that work a lot with concentrated inorganic acids and alkalis. It is not resistant to high temperatures. A table for convenient work in the laboratory The superstructure allows you to compactly place the necessary reagents and laboratory utensils next to the workplace. Its depth is 25 cm, and its height is 80 cm. The table has plumbing fixtures: a faucet and a small sink-drain made of polypropylene resistant to aggressive chemicals are built into the countertop. Its diameter is 135 mm and its depth is 110 mm. The working area is illuminated by a fluorescent lamp (included in the package). The switch is located on the left-hand side of the superstructure. There are also two sockets, one of which is grounded. Sockets have the IP20 degree of protection, maximum load: 1.5 kW. The side laminated panels of the table (chipboard 16 mm thick) are edged with a 2 mm PVC edge, which increases their impact resistance and mechanical strength. The legs of the table are adjustable in height within two centimeters, allowing you to place it even on a rather uneven floor. Advantages of NV-1200 PH tables An inexpensive solution for laboratories that value the reliability and durability of furniture; The working surface can be selected based on the needs of your laboratory; It is convenient to work while standing: the height of the working surface is 85 cm; On the shelves and in the drawers of the table you can store accessories to the devices on the table, laboratory utensils or reagents. Application of NV-1200 PX tables Tables of the NV series are used in laboratories of the widest profile: at food and light industry enterprises, in scientific and educational workshops, in chemistry classrooms, quality control centers, medical organizations and many others.

The working surface is combined: the main table top TRESPA TopLabPlus 16/23mm with a side made of composite material based on epoxy resins (the height of the side above the table top is 7 mm, the depth is 30 mm) with a depth of 650 mm / an auxiliary table top made of TRESPA material with a depth of 150 mm Length, mm: 1800 Depth, mm: 800 Height, mm: 900 BASIC EQUIPMENT The base is a collapsible frame made of rectangular steel profile, painted with powder paint (RAL 7035) with the texture of shagreen leather Hidden fasteners Two easily removable rear screens (RAL 7035) and one non-removable (RAL 5023) Rear side boxes Adjustable supports (0-40 mm)

BASIC EQUIPMENT The base is a collapsible frame made of rectangular steel profile, painted with powder paint (RAL 7035) with the texture of shagreen leather Hidden fasteners Two easily removable rear screens (RAL 7035) and one non-removable (RAL 5023) Rear side boxes Adjustable supports (0-40 mm)

Furniture for laboratory work. Titration table Table top: Laminate Length, mm: 1200 Depth, mm: 600 Height, mm: 900(1800) EQUIPMENT rack support racks – aluminum profile painted with powder paint (RAL 1001) the top panel of the rack with a depth of 190mm – metal painted with powder paint (RAL 1001)

Combined work surface: main table top TRESPA TopLabPlus 16/23mm (with a side made of composite material based on epoxy resins, the height of the side above the table top is 7 mm, depth 30 mm) 650 mm deep / auxiliary table top made of TRESPA material 200 mm deep / main table top TRESPA TopLabPlus 16/23mm 650 mm deep Length, mm: 1200 Depth, mm: 1500 Height, mm: 750 BASIC EQUIPMENT The base is a collapsible metal frame made of rectangular steel profile, painted with powder paint (RAL 7035) with the texture of shagreen leather Four easily removable screens (RAL 7035) and two non-removable (RAL 5023) Hidden fasteners Adjustable supports (0-40 mm) A set of end boxes-plugs

Wall-mounted table One-piece table top: TRESPA TopLabPlus 16 mm Length, mm: 1200 Depth, mm: 800 Height, mm: 750 BASIC EQUIPMENT The base is a collapsible frame made of rectangular steel profile, painted with powder paint (RAL 7035) with the texture of shagreen leather Hidden fasteners Two easily removable rear screens (RAL 7035) and one non-removable (RAL 5023) Rear side boxes Adjustable supports (0-40 mm)

Furniture for laboratory work. Table-sink LAB-M MD 120.65.90 PP Width, mm: 1200 Depth, mm: 650 Height, mm: 900 Equipment: The table top is polypropylene with an overhead rim around the perimeter. Attention! It is not recommended to use 2 polypropylene Bowls for carrying out work with oil and petroleum products (fuel oil, bitumen, etc.) . Hanging bowl attachment The inner size of each bowl – 400*400*300 mm The base of the sink table is a support pedestal made of white melamine Facades – laminated MDF of white color with a thickness of 16 mm, dark gray ABS edging Without shelves

BASIC EQUIPMENT The base is a collapsible frame made of rectangular steel profile, painted with powder paint (RAL 7035) with the texture of shagreen leather Hidden fasteners Two easily removable rear screens (RAL 7035) and one non-removable (RAL 5023) Adjustable supports (0-40 mm)

The working surface is combined: the main table top TRESPA TopLabPlus 16/23mm with a side made of composite material based on epoxy resins (the height of the side above the table top is 7 mm, depth 30 mm) with a depth of 650 mm / auxiliary table top made of TRESPA material with a depth of 150 mm Length, mm: 1500 Depth, mm: 800 Height, mm: 900 BASIC EQUIPMENT The base is a collapsible frame made of rectangular steel profile, painted with powder paint (RAL 7035) with the texture of shagreen leather Hidden fasteners Two easily removable rear screens (RAL 7035) and one non-removable (RAL 5023) Rear side boxes Adjustable supports (0-40 mm)

Furniture for laboratory work. Table-sink LAB-M MO 120.65.90 T6V Width, mm: 1200 Depth, mm: 650 Height, mm: 900 equipment: Table top – TRESPA TopLabPlus – monolithic slab of ultra-high pressing thickness of 6mm with a chemically resistant surface made of polyurethane-acrylic composition, on a substrate of wood-containing material (plywood 15mm or melamine 16mm), edged around the perimeter of PVC edge 2mm 1 built–in bowl - epoxy compound VITE. The location of the bowl in the center, fixing the bowl flush with the level of the countertop. Inner bowl size – 450*365*280 mm The base of the sink table is a support pedestal made of white melamine Facades – laminated MDF of white color with a thickness of 16 mm, dark gray ABS edging Without shelves

The permissible distributed load on the table is up to 250 kg. 1. LK-900 ST (steel) Width – 900 CPL- 47 640 ₽ CERAMICS- 48,990 ₽ GRANTEC- 55 980 ₽ STAINLESS STEEL. STEEL- 58 280 ₽ LAB HPL- 57 020 ₽ 2. LK-900 ST (polypropylene) Width – 900 CPL- 49 540 ₽ CERAMICS- 50,890 ₽ GRANTEC- 57 880 ₽ STAINLESS STEEL. STEEL- 60 180 ₽ LAB HPL- 58 920 ₽ 3. LK-1200 ST (steel) Width – 1200 CPL- 57 170 ₽ CERAMICS- 59 330 ₽ GRANTEC- 68 180 ₽ STAINLESS STEEL. STEEL- 71 110 ₽ LAB HPL- 70 400 ₽ 4. LK-1200 ST(polypropylene) Width – 1200 CPL- 59 080 ₽ CERAMICS- 61 240 ₽ GRANTEC- 70 090 ₽ STAINLESS STEEL. STEEL- 73 020 ₽ LAB HPL- 72 310 ₽ 5. LK-1500 ST (steel) Width – 1500 CPL- 65 890 ₽ CERAMICS- 68 270 ₽ GRANTEC- 79 830 ₽ STAINLESS STEEL. STEEL- 83 300 ₽ LAB HPL- 82 190 ₽ 6. LK-1500 ST (polypropylene) Width – 1500 CPL- 68 960 ₽ CERAMICS- 71 340 ₽ GRANTEC- 82 900 ₽ STAINLESS STEEL. STEEL- 86 370 ₽ LAB HPL- 85 260 ₽ 7. LK-1800 ST (steel) Width – 1800 CPL- 74 010 ₽ CERAMICS- 75,930 ₽ GRANTEC- 90 470 ₽ STAINLESS STEEL. STEEL- 94 310 ₽ LAB HPL- 92 780 ₽ 8. LK-1800 ST(polypropylene) Width – 1800 CPL- 78 910 ₽ CERAMICS- 80 830 ₽ GRANTEC- 95 370 ₽ STAINLESS STEEL. STEEL- 99 210 ₽ LAB HPL- 97 680 ₽

The NV-1500 LX-Z is a specialized laboratory table on a reinforced metal frame with a countertop width of 1500 mm. It is designed to accommodate heavy instruments, such as chromatographs or other analytical equipment. The kit includes a side cabinet for storing accessories to the devices. Dimensions of the table when assembled (W×D ×H): 1500×700×850 mm. It is designed to work standing up. Dimensions of the stand (W×D×C): 600×460×650 mm. It fits under the table. In the upper right corner of the table there is an electric panel with two sockets. Both sockets with grounding and shutters are designed for current up to 16 A and voltage up to 250 V. Working surface material: porcelain tile. It is moisture-resistant and perfectly withstands high temperatures. It is resistant to prolonged exposure to concentrated acids, alkalis and organic solvents. It has limited resistance to hydrofluoric acid. This is one of the most popular types of countertops for laboratory furniture. The tables have a reinforced welded all-metal frame painted with white powder paint. The side laminated panel (chipboard 16 mm thick) is edged with a durable PVC edge 2 mm thick, which increases its impact resistance and mechanical strength. The legs of the table are adjustable in height within two centimeters, allowing you to place it even on a rather uneven floor.