Metal double support cabinet with 2 doors and 2 drawers LAB-PRO VOLUME 2 86.50.86

The Korsa NV-1500 SHV-NERZH Laboratory fume cupboards are single—frame cabinets with a width of 1410 mm with a stainless steel countertop. External dimensions of the cabinet (W×D×H): 1410×700×1960 mm. Dimensions of the working area (W×D×H): 1378×540×750 mm. Table top: stainless steel. Convenient fume cupboards for comfortable work in the laboratory Working surface material: stainless steel. It is well suited for biological or medical laboratories, but it is not recommended for use in chemical laboratories. It is resistant to prolonged exposure to temperature, organic solvents, and oils. It has limited resistance to short-term exposure to concentrated mineral acids and alkalis and is destroyed by prolonged exposure to concentrated acids. The working area is closed by a single lifting frame with a counterweight. It has two exhaust zones: the hood of the exhaust box and the level of the countertop. Diameter of the flange for connection to the ventilation system: 150 mm. Working area size (W×D×H): 1378×540×750 mm. Please note that the cabinet narrows upwards. At a height of 50 cm, the depth of the working area will be 410 mm, at a height of 70 cm: 365 mm. If you need to place high equipment, then make sure that it corresponds to the dimensions of the camera, otherwise you will not be able to close the cabinet. The height of the raised glass above the cabinet: 510 mm, that is, with the glass raised, the total height of the cabinet will be 2470 mm. The working area is illuminated by an LED lamp (included in the package). The switch is located on the right-hand side of the cabinet, next to the sockets. The fume cupboard is equipped with two sockets, one of them with grounding. Sockets have the IP20 degree of protection, maximum load: 1.5 kW. The base of the cabinet is an all-welded metal frame in powder coating. The side laminated panels (chipboard with a thickness of 16 mm) are edged with a durable PVC edge with a thickness of 2 mm, which increases their impact resistance and mechanical strength. The cabinet legs are adjustable in height within two centimeters, allowing you to place the cabinet even on a rather uneven floor.

1. LK-400 TYA-V (with 3 drawers) Width- 400 Chipboard- 11,000 ₽ Steel-20,980 ₽ 2. LK-450 TYA-V (with 3 drawers) Width- 450 CHIPBOARD- 11 360 ₽ Steel- 21 060 ₽ 3. LK-600 TYA-V (with 3 drawers) Width- 600 CHIPBOARD- 15 530 ₽ Steel- 24,950 ₽ 4. LK-750 TYA-V (with 3 drawers) Width- 750 CHIPBOARD- 18 600 ₽ Steel- 27 030 ₽ 5. LK-900 TYA-V (with 3 drawers) Width- 900 CHIPBOARD- 19 300 ₽ Steel- 31 070 ₽

900 mm wide, 2025 mm high cabinet made of painted steel for storing laboratory utensils and documents. Two compartments with two metal shelves in each. The upper and lower doors are made of steel. Overall dimensions 900x500x2025 mm Weight 95 kg

Furniture for laboratory work. Cupboard for dishes Length, mm: 500 Depth, mm: 500 Height, mm: 1940 PACKAGE CONTENTS housing – white melamine with a thickness of 16 mm, ABS edge of dark gray color facades – tinted light gray glass 2 compartments (the upper one is 686 mm high, the lower one is 1076 mm high) 5 shelves (1 built-in, 4 removable (1 in the upper compartment, 3 in the lower) with the possibility of rearrangement at 3 levels in height each).

BASIC EQUIPMENT The base is a collapsible frame made of rectangular steel profile, painted with powder paint (RAL 7035) with the texture of shagreen leather Hidden fasteners Two easily removable rear screens (RAL 7035) and one non-removable (RAL 5023) Rear side boxes Adjustable supports (0-40 mm)

Furniture for laboratory work. Desk Length, mm: 1500 Depth, mm: 700 Height, mm: 760 COMPLETE SET table top, base and curbstones – melamine 16mm thick left curbstone with 3 drawers, internal drawer size – 310*470* 100mm, full extension guides

Table-sink LAB-M MO 150.60.90 PP Width, mm: 1500 Depth, mm: 600 Height, mm: 900 equipment: The table top is a single module made of polypropylene ATTENTION! It is not recommended to use the inner size of the bowl for work with oil and petroleum products (fuel oil, bitumen, etc.) – 500*400*285 mm The base of the sink table is a support pedestal made of white melamine Facades – laminated MDF of white color with a thickness of 16 mm, dark gray ABS edging Without shelves

Furniture for laboratory work. Cabinet for appliances Length, mm: 500 Depth, mm: 500 Height, mm: 1940 PACKAGE CONTENTS body – white melamine with a thickness of 16 mm, ABS edge dark gray facade – white melamine with ABS edge dark gray 2 compartments (the upper one is 686 mm high, the lower one is 1076 mm high) the upper compartment is open, the lower one with a hinged facade has 5 shelves (1 built-in, 4 removable (1 in the upper compartment, 3 in the lower one) with the possibility of rearrangement on 3 levels in height each).

The NV-800 SPr cabinet for devices with 2 glass doors. The cabinet is made of laminated chipboard with a 2 mm shockproof PVC edge on the facade. Included in the set: 2 glass doors for the upper compartment; 2 doors for the lower compartment; 4 shelf inserts; metal legs 100 mm high.

Furniture for laboratory work. Washing table on a metal support stand LAB-M MD ME 150.65.90 PP Width, mm: 1500 Depth, mm: 650 Height, mm: 900 Equipment: The table top is polypropylene with an overhead rim around the perimeter. Attention! It is not recommended to use it for working with oil and petroleum products (fuel oil, bitumen, etc.) 2 Bowls – polypropylene. Hanging bowl attachment The inner size of each bowl – 400*400*300 mm The base of the sink table is a metal support pedestal. All-welded frame painted with dark grey powder paint RAL 7011. The bottom and top of the housing are sheet steel painted with powder paint of dark gray RAL 7011, the side walls are made of sheet steel painted with powder paint of white RAL 9016. Facades – laminated MDF of white color with a thickness of 16 mm, dark gray ABS edging

Furniture for laboratory work. Mounted storage cabinet Length, mm: 1200 Depth, mm: 350 Height, mm: 700 PACKAGE CONTENTS the case is white melamine with a thickness of 16 mm, the ABS edge is dark gray two open compartments in the right compartment 1 built–in shelf, in the left compartment 1 easily removable shelf with the possibility of rearrangement at 5 levels in height the permissible load on the shelf is 20 kg.

The NV-800 SCb is a large specialized laboratory table with a damping concrete slab on a sand cushion. It is designed to accommodate centrifuges, sieves and other devices that vibrate strongly during operation. Dimensions when assembled: 860×860×750 mm. The table has a reinforced metal frame. The main countertop has a built-in drawer open from above, which contains a sand cushion. It is closed with a heavy concrete slab, which is attached to a second, smaller countertop. The sand cushion and the concrete base of the second countertop provide good protection against vibrations. The size of the anti-vibration countertop: 660×660 mm. Like the main countertop, it is made of chipboard, and visually they do not differ from each other. The table has a metal frame painted with white powder paint. The side laminated panels (chipboard with a thickness of 16 mm) are edged with a durable PVC edge with a thickness of 2 mm, which increases their impact resistance and mechanical strength. The legs of the table are adjustable in height within two centimeters, allowing you to place it even on a rather uneven floor.

The Korsa NV-1500 SHV-PB laboratory fume cupboard is a single—frame cabinet with a width of 1410 mm with a table top made of polypropylene. External dimensions of the cabinet (W×D×H): 1410×700×1960 mm. Dimensions of the working area (W×D×H): 1378×540×750 mm. Table top: polypropylene. A reliable fume cupboard for laboratories Working surface material: monolithic polypropylene. It is moisture-resistant, resistant to prolonged exposure to concentrated acids, alkalis and organic solvents. Poorly resistant to high temperatures. Polypropylene countertops are suitable for chemical laboratories that work a lot with concentrated inorganic acids and alkalis. The working area is closed by a single lifting frame with a counterweight. It has two exhaust zones: the hood of the exhaust box and the level of the countertop. Diameter of the flange for connection to the ventilation system: 150 mm. Working area size (W×D×H): 1378×540×750 mm. Please note that the cabinet narrows upwards. At a height of 50 cm, the depth of the working area will be 410 mm, at a height of 70 cm: 365 mm. If you need to place high equipment, then make sure that it corresponds to the dimensions of the camera, otherwise you will not be able to close the cabinet. The height of the raised glass above the cabinet: 510 mm, that is, with the glass raised, the total height of the cabinet will be 2470 mm. The working area is illuminated by an LED lamp (included in the package). The switch is located on the right-hand side of the cabinet, next to the sockets. The fume cupboard is equipped with two sockets, one of them with grounding. Sockets have the IP20 degree of protection, maximum load: 1.5 kW. The base of the cabinet is an all-welded metal frame in powder coating. The side laminated panels (chipboard 16 mm thick) are edged on the facade with a durable PVC edge 2 mm thick, which increases their impact resistance and mechanical strength. The cabinet legs are adjustable in height within two centimeters, allowing you to place the cabinet even on a rather uneven floor.

BASIC EQUIPMENT The base is a collapsible frame made of rectangular steel profile, painted with powder paint (RAL 7035) with the texture of shagreen leather Hidden fasteners Two easily removable rear screens (RAL 7035) and one non-removable (RAL 5023) Rear side boxes Adjustable supports (0-40 mm)

Furniture for laboratory work. Washing table on a metal support stand LAB-M MO13 ME 80.60.90 SS Width, mm: 800 Depth, mm: 600 Height, mm: 900 equipment: The table top is a single module made of SUS 201 stainless steel (analogous to AISI 201). Attention! The product is recommended to be used only for work with non-aggressive substances. For work with various reagents, in addition to mineral acids, it is recommended to use washing tables made of AISI 304 stainless steel. Inner bowl size – 340*400* 130mm The base of the sink table is a metal support pedestal. The lower part is an all–welded frame painted with dark gray RAL 7011 powder paint. The bottom and top of the housing are sheet steel painted with powder paint of dark gray RAL 7011, the side walls are made of sheet steel painted with powder paint of white RAL 9016. Facades – laminated MDF of white color with a thickness of 16 mm, dark gray ABS edging Without shelves

NV-1210 PC is a wall table with a superstructure in the NV line. The table top is made of monolithic ceramic with a depth of 70 cm and a width of 121 cm. A lamp and two sockets are built into the superstructure. It is designed for standing work: the height of the table top is 85 cm. External dimensions of the table (W×D×H): 1210×700×1650 mm. The table top made of monolithic ceramics is moisture-resistant, perfectly withstands high temperatures. It is more resistant to chemicals and heat than ceramic tile since there are no seams. The superstructure allows you to compactly place the necessary reagents and laboratory utensils next to the workplace. Its depth is 25 cm, and its height is 80 cm. The working area is illuminated by a fluorescent lamp (included in the package). The switch is located on the left-hand side of the superstructure. There are also two sockets, one of which is grounded. Sockets have the IP20 degree of protection, maximum load: 1.5 kW. On the right-hand side under the table top there is a built-in cabinet with three drawers. You can store laboratory utensils, equipment accessories or other small things there. The side laminated panels of the table (chipboard 16 mm thick) are edged with a 2 mm PVC edge, which increases their impact resistance and mechanical strength. The legs of the table are adjustable in height within two centimeters, allowing you to place it even on a rather uneven floor. Advantages of NV-1210 PC tables The working surface is made of monolithic ceramics. It is convenient to work while standing: the height of the working surface is 85 cm. On the shelves and in the drawers of the table you can store accessories to the devices on the table, laboratory utensils or reagents. Application of NV-1210 PC tables Tables of the NV series are used in laboratories of the widest profile: at food and light industry enterprises, in scientific and educational workshops, in chemistry classrooms, quality control centers, medical organizations and many others.