Table-sink LAB-M MO 80.65.90 T6F

Working surface: Porcelain stoneware (ceramic tile 300*300mm) Length, mm: 1200 Depth, mm: 740 Height, mm: 2100 Working box the working surface is ceramic tile, resistant to concentrated acids, alkalis, organic solvents and high temperatures) the size of the working space – 1130*600* 1090mm front anti–spill side - TRESPA TopLab sink-drain (polypropylene, internal size 250*100*150mm), water pipe the package includes a siphon, a gofroflang, 2 flexible eyeliners with a length of 1200mm the body is metal, painted with white powder paint 2 dependent lifting screens with the possibility of fixing at any height – tempered glass with a thickness of 5mm in aluminum frames, lifting 0-700mm, do not change the dimensions of the cabinet when lifting the upper fixed screen – metal painted with white powder paint

Furniture for laboratory work. Microscopy table Length, mm: 1200 Depth, mm: 700 Height, mm: 760(1140) TABLE top – laminate shelf for Petri dishes (8 cells with an internal size of 140*100*90mm, 3 cells with an internal size of 190*100*90mm) – melamine 16mm thick side decorative panels – melamine 16mm thick

EQUIPMENT table top – laminate 1 built–in bowl - stainless steel SUS 201 (analog AISI 201) ATTENTION! The product is recommended to be used only for work with non-aggressive substances. inner bowl size – 330*400* 140mm cabinet body – melamine 16mm thick

BASIC EQUIPMENT Working box the front guide posts are aluminum profile painted with powder paint (RAL 7035/RAL 5023), in the right rack there are a light switch and 2 splash–proof sockets with a 3.2kW cover (IP54) the front anti-spill side is acid-resistant polished stainless steel. AISI 304 steel rear, upper, side panels – metal painted with powder paint (RAL 7035) with the texture of shagreen leather 2 dependent lifting screens – tempered glass in aluminum frames, lifting 0-780mm, do not change the dimensions of the cabinet when lifting the upper fixed screen – tempered glass in an aluminum frame on the top panel: 4 anti-explosion the valve lamp LED dust– and moisture-proof (2X10W IP65) is separated from the working space by tempered glass with a thickness of 4mm flange d=250mm (the distance from the back panel to the center of the flange is 170mm) switching box with automatic emergency power off 16A easily removable exhaust visors 3 exhaust levels on the rear panel: 4 holes d =22mm with plugs made of stainless steel for the installation of additional pipes or taps technological hole d=50mm with a plastic plug counterweights are placed in the front pillars-pylons and are easily serviced Frame base metal frame with a pedestal, painted with powder paint (RAL 7035) with a texture of shagreen leather: double metal facades with a noise damper, opening angle 270° handles – polypropylene 2 compartments with locks 1 shelf with the possibility of installation on three levels in any of the compartments flange d=100mm service panel – metal box painted with powder paint (RAL 5023) with the texture of shagreen leather: adjustable supports

The NV-400 SHO wardrobe is designed for storing clothes. There is a shelf for hats and shoes, a barbell for clothes. The cabinet is made of laminated chipboard with a shockproof PVC edge of 2 mm on the facade. The standard version of the NV-400 SHO laboratory cabinet for storing clothes: a top shelf for hats; a bottom shelf for shoes; a clothes rod; metal legs 100 mm high; additional equipment (options): lock in the door; drawers.

Furniture for laboratory work. All-metal exhaust cabinet Working surface: Porcelain stoneware (ceramic tile 300*300mm), stitching - epoxy compound Overall dimensions: Length, mm: 900 Depth, mm: 740 Height, mm: 2100 equipment Working box front anti–spill side - acid–resistant polished stainless steel AISI 316 housing - metal painted with white powder paint (RAL 9016) guide posts – aluminum profile painted with dark gray powder paint (RAL 7011) 2 dependent lifting screens – tempered glass in aluminum frames, lifting 0-710mm, do not change the dimensions of the cabinet when lifting.

Furniture for laboratory work. Sliding cabinet Length, mm: 400 Depth, mm: 580 Height, mm: 830 PACKAGE CONTENTS case – melamine 16mm thick one built-in shelf lock roller supports h=60mm

Furniture for laboratory work. Wall rack Length, mm: 900 Depth, mm: 320 Height, mm: 900 BASIC EQUIPMENT support racks – aluminum profile painted with powder paint (RAL 9016) with the texture "shagreen" upper shelf depth 320mm – PVC thickness 5mm in a frame of 2 aluminum profiles painted with powder paint (RAL 7011) with the texture "shagreen", height adjustment is not provided lower shelf depth 260mm – PVC thickness 5mm in a frame of 2 aluminum profiles painted with powder paint (RAL 7011) with a "shagreen" texture, height adjustment is not provided

Furniture for laboratory work. Storage cabinet open Length, mm: 500 Depth, mm: 500 Height, mm: 1940 PACKAGE CONTENTS the case is white melamine with a thickness of 16 mm, the ABS edge is dark gray 2 open compartments (the upper one is 686 mm high, the lower one is 1076 mm high).

Suitable for comfortable seating at tables from 750 to 900 mm high. It is possible to replace the standard gas lift with a high one, which will allow changing the height adjustment range of the chair from 570 to 820 mm and using such a chair to work at tables above 900 mm. The permissible load on the product should not exceed 120 kg. Seat size - 455x440 mm, backrest - 410x370 mm.

Table top: FRIDURIT 20mm Length, mm: 1538 Depth, mm: 726 Height, mm: 2100 equipment Working box front anti–spill side - TRESPA TopLab sink-drain (ceramics, internal size 250*95*112mm), pipe for water the package includes a siphon corrugated 2 flexible eyeliners with a length of 1200mm housing – melamine with a thickness of 16mm lifting screen with the possibility of fixing at any height – tempered glass with a thickness of 5mm, lifting 0-700mm, increase the height of the cabinet at full lifting by 450mm

Furniture for laboratory work. Titration table Table top: Laminate Length, mm: 1600 Depth, mm: 600 Height, mm: 900(1800) EQUIPMENT rack support racks – aluminum profile painted with powder paint (RAL 1001) the top panel of the rack with a depth of 190mm – metal painted with powder paint (RAL 1001)

Combined work surface: main countertop - KG (porcelain stoneware), 650 mm deep / auxiliary countertop made of TRESPA material with a depth of 150 mm Length, mm: 1200 Depth, mm: 800 Height, mm: 900 BASIC EQUIPMENT The base is a collapsible frame made of rectangular steel profile, painted with powder paint (RAL 7035) with the texture of shagreen leather Hidden fasteners Two easily removable rear screens (RAL 7035) and one non-removable (RAL 5023) Rear side boxes

Working surface: Porcelain stoneware (ceramic tile 300*300mm) Length, mm: 1500 Depth, mm: 740 Height, mm: 2100 Working box the working surface is ceramic tile, resistant to concentrated acids, alkalis, organic solvents and high temperatures) the size of the working space – 1430*600* 1090mm front anti–spill side - TRESPA TopLab sink-drain (polypropylene, internal size 250*100*150mm), water pipe the package includes a siphon, a gofroflang, 2 flexible eyeliners with a length of 1200mm the body is metal, painted with white powder paint 2 dependent lifting screens with the possibility of fixing at any height – tempered glass with a thickness of 5mm in aluminum frames, lifting 0-700mm, do not change the dimensions of the cabinet when lifting the upper fixed screen – metal painted with white powder paint

The NV-800 MD-B is a table with two stainless steel sinks and without a dryer. It is designed for standing work: its height is 85 cm. Dimensions when assembled (W×D×H): 800×600×850 mm. The overhead double sink is made of corrosion-resistant stainless steel. Washing depth: 16 cm. The side laminated panels of the table (chipboard 16 mm thick) are edged on the facade with a PVC edge 2 mm thick, which increases their impact resistance and mechanical strength. The package includes a stainless steel mixer with 300 mm flexible tap connectors and a siphon. The legs of the table are adjustable in height within two centimeters, allowing you to place it even on a rather uneven floor. Advantages of NV-800 MD-B tables Minimalistic compact model with two sinks. It is an inexpensive solution for laboratories that value the reliability and durability of furniture. Its size makes it suitable for very small rooms. Application of tables NV-800 MD-B Tables of the HB series are used in laboratories of the widest profile: at food and light industry enterprises, in scientific and educational workshops, in chemistry classrooms, quality control centers, medical organizations and many others.

Furniture for laboratory work. Washing table on a metal support stand LAB-M MO ME150.65.90 F20 Width, mm: 1500 Depth, mm: 650 Height, mm: 900 equipment: Table top – monolithic laboratory ceramics FRIDURIT 20 mm (one-piece seamless glazed plate without a rim, color light gray) 1 built–in bowl - FRIDURIT ceramics. The location of the bowl in the center, the mounting of the bowl is overhead. Inner bowl size – 400*400*250 mm The base of the sink table is a metal support pedestal. The lower part is an all-welded frame painted with dark gray RAL 7011 powder paint. The bottom and top of the housing are sheet steel painted with dark gray powder paint RAL 7011, the side walls are made of sheet steel painted with white powder paint RAL 9016. Facades – laminated MDF of white color with a thickness of 16 mm, dark gray ABS edging