Laboratory radio installation table SR-180.64.76.PLC

The NV-800 SCb is a large specialized laboratory table with a damping concrete slab on a sand cushion. It is designed to accommodate centrifuges, sieves and other devices that vibrate strongly during operation. Dimensions when assembled: 860×860×750 mm. The table has a reinforced metal frame. The main countertop has a built-in drawer open from above, which contains a sand cushion. It is closed with a heavy concrete slab, which is attached to a second, smaller countertop. The sand cushion and the concrete base of the second countertop provide good protection against vibrations. The size of the anti-vibration countertop: 660×660 mm. Like the main countertop, it is made of chipboard, and visually they do not differ from each other. The table has a metal frame painted with white powder paint. The side laminated panels (chipboard with a thickness of 16 mm) are edged with a durable PVC edge with a thickness of 2 mm, which increases their impact resistance and mechanical strength. The legs of the table are adjustable in height within two centimeters, allowing you to place it even on a rather uneven floor.

Furniture for laboratory work. Cabinet with countertop Table top: Laminate Length, mm: 500 Depth, mm: 600 Height, mm: 900 EQUIPMENT cabinet - melamine 16mm thick 1 door 1 built-in shelf lock all-welded frame made of rectangular metal profile painted with white powder paint adjustable supports

Working surface: FRIDURIT 20mm Length, mm: 1838 Depth, mm: 726 Height, mm: 2100 equipment Working box front anti–spill side - TRESPA TopLab sink-drain (ceramics, internal size 250*95*112mm), water pipe the package includes a siphon gofroslang two flexible eyeliners 1200mm long melamine body 16mm thick 2 lifting screens with the possibility of fixing at any height – tempered glass with a thickness of 5mm, lifting 0-700mm, increase the height of the cabinet at full lifting by 450mm

Furniture for laboratory work. Cabinet with countertop Working surface: TRESPA TopLab Length, mm: 500 Depth, mm: 800 Height, mm: 900 EQUIPMENT cabinet - melamine 16mm thick 1 door 1 built-in shelf lock all-welded frame made of rectangular metal profile painted with white powder paint adjustable supports

The NV-1500 SM-B is a specialized table for microscopy. The table top is 70 cm deep with a small cutout made of laminate. It is designed for sitting work: the height from the floor to the countertop is 75 cm (this is the height of a regular office desk). External dimensions of the table (W×D×H): 1500×700×750 mm. A small superstructure allows you to compactly place the necessary drugs and accessories next to the workplace. Its dimensions: (W×D×C): 668×120×200 mm. The table top is made of laminated chipboard. It is relatively moisture-resistant, resistant to short-term exposure to acids, alkalis and organic solvents and is well suited for the placement of devices. There is a small semicircular cutout on the front of the table top, which allows you to work more comfortably with the microscope. The side laminated panels of the table (chipboard 16 mm thick) are edged with a PVC edge 2 mm thick, which increases their impact resistance and mechanical strength. The legs of the table are adjustable in height within two centimeters, allowing you to place it even on a rather uneven floor.

The arrangement of the locker room is required both in factories, laboratories and other production sites, and fitness centers. Two main requirements are most often applied to lockers – durability and aesthetics, which directly affect the mood of employees or visitors. Choose really high–quality furniture for your organization - it's not difficult with Simple PRO. Width - 400

Furniture for laboratory work. Washing table LAB-M MO13 80.60.90 SS Width, mm: 800 Depth, mm: 600 Height, mm: 900 Equipment: The table top is a single module made of SUS 201 stainless steel (analogous to AISI 201). Attention! The product is recommended to be used only for work with non-aggressive substances. For work with various reagents, in addition to mineral acids, it is recommended to use washing tables made of AISI 304 stainless steel. Inner bowl size – 340*400* 130mm The base of the sink table is a support pedestal made of white melamine Facades – laminated MDF of white color with a thickness of 16 mm, dark gray ABS edging Without shelves

A table with an overall height of 1800 mm with a table top measuring 1280× 640 mm made of porcelain stoneware, monolithic ceramics or plastic. It is designed for long-term operation, the power frame does not contain aluminum and plastic parts in the fasteners. Overall dimensions without superstructure 1280x640x900 mm Overall dimensions with superstructure 1280x708x1800 mm

NV-1800 Ln are laboratory tables with a metal frame and a tabletop width of 1500 mm. They are designed for sitting work (the height of the table is 750 mm, this is the height of a regular office desk). The tables have a metal frame painted with durable powder paint. The side laminated panels (chipboard 16 mm thick) are edged on the facade with a durable PVC edge 2 mm thick, which increases their impact resistance and mechanical strength. The legs of the table are adjustable in height within two centimeters, allowing you to place it even on a rather uneven floor. Dimensions of the table when assembled: 1800×700× 750 mm. Working surface for your classes We offer laboratory tables with different working surface material: Version: Table top NV-1800 LLn: Laminate. A budget solution, suitable for school chemistry and physics classrooms, office work, placement of devices. NV-1800 LKn: Porcelain tile. A practical solution for most chemical, biological, medical laboratories and workshops. You can put drying cabinets, baths and other heating devices on it. NV-1800 LSPn: Chemically resistant plastic. A good choice for training workshops, analytical and medical laboratories. It does not tolerate high temperatures well, heating devices should not be placed on the surface. NV-1800 LNn: Stainless steel. Stainless steel is well suited for biological or medical laboratories, but it is not recommended for use in chemical laboratories. It has limited resistance to short-term exposure to concentrated mineral acids and alkalis and is destroyed by prolonged exposure to concentrated acids. NV-1800 LDl: Polypropylene. A specialized solution for chemical laboratories working with inorganic solvents. Advantages of NV-1800 Ln tables It is the largest table in the series, it is possible to organize two full-fledged workplaces. An inexpensive solution for laboratories that value the reliability and durability of furniture; Heating plates or baths can be placed on the granite surface resistant to high temperatures; It is convenient to work sitting down the height of the work surface from the floor is 75 cm. Application of NV-1800 Ln tables Tables of the NV series are used in laboratories of the widest profile: at food and light industry enterprises, in scientific and educational workshops, in chemistry classrooms, quality control centers, medical organizations and many others.

The working surface is combined: the main table top TRESPA TopLabPlus 16/23mm with a side made of composite material based on epoxy resins (the height of the side above the table top is 7 mm, the depth is 30 mm) with a depth of 650 mm / an auxiliary table top made of TRESPA material with a depth of 150 mm Length, mm: 1800 Depth, mm: 800 Height, mm: 900 BASIC EQUIPMENT The base is a collapsible frame made of rectangular steel profile, painted with powder paint (RAL 7035) with the texture of shagreen leather Hidden fasteners Two easily removable rear screens (RAL 7035) and one non-removable (RAL 5023) Rear side boxes Adjustable supports (0-40 mm)

Laboratory work desk Working surface: STEEL (single stainless steel module with anti-spill side) Length, mm: 1800 Depth, mm: 650 Height, mm: 750 BASIC EQUIPMENT The base is a collapsible frame made of rectangular steel profile, painted with powder paint (RAL 7035) with the texture of shagreen leather Hidden fasteners Two easily removable rear screens (RAL 7035) and one non-removable (RAL 5023) Adjustable supports (0-40 mm)

The cabinet with a mobile column is designed for storing dry reagents (which do not emit fumes) and laboratory supplies. Each cabinet (module) is connected to the others in a section and has a wall mount. The roller provides easy extension of the column with shelves and protects the cabinet from tipping forward. The maximum capacity of the shelf does not exceed 20 kg, the total capacity of the cabinet does not exceed 100 kg. The design does not provide a flange for connection to the ventilation system. For the storage of liquid and aggressive reagents, you should choose a cabinet with a body made of polypropylene LK-SHRP or LK-SHR. LK-450 SHR Width - 450 CHIPBOARD- 44 340 ₽ STEEL- 68,460 ₽

NV-800 P are small wall-mounted tables with a superstructure in the NV line. The table top is 70 cm deep. A lamp and two sockets are built into the superstructure. It is designed for standing work: the height from the floor to the table top is 85 cm. External dimensions of the table (W×D×H): 760×700×1650 mm. Working surface for your tasks We offer tables with various work surfaces. Table Model: Tabletop NV-800 PL: Laminate. It is relatively moisture-resistant, resistant to short-term exposure to acids, alkalis and organic solvents. This countertop does not tolerate strong heating or prolonged exposure to solvents, concentrated acids and alkalis. NV-800 PC: Porcelain tile. It is a practical solution for most chemical, biological, medical laboratories and workshops. You can put drying cabinets, baths and other heating devices on it. NV-800 PSP: Chemically resistant plastic. It is a good choice for training workshops, analytical and medical laboratories. It does not tolerate high temperatures, heating devices should not be placed on the surface. NV-800 PP: Polypropylene. It is chemically resistant, being a specialized solution for chemical laboratories that work a lot with concentrated inorganic acids and alkalis. It is not resistant to high temperatures. A table for convenient work in the laboratory The superstructure allows you to compactly place the necessary reagents and laboratory utensils next to the workplace. Its depth is 25 cm, and its height is 80 cm. The working area is illuminated by a fluorescent lamp (included in the package). The switch is located on the left-hand side of the superstructure. There are also two sockets, one of which is grounded. Sockets have the IP20 degree of protection, maximum load: 1.5 kW. The side laminated panels of the table (chipboard 16 mm thick) are edged with a 2 mm PVC edge, which increases their impact resistance and mechanical strength. The legs of the table are adjustable in height within two centimeters, allowing you to place it even on a rather uneven floor. Advantages of NV-800 P tables An inexpensive solution for laboratories that value the reliability and durability of furniture; Suitable for small rooms; The working surface can be selected based on the needs of your laboratory; It is convenient to work while standing: the height of the working surface is 85 cm; On the shelves you can store accessories for devices on the table, laboratory utensils or reagents. Application of NV-800 P tables Tables of the NV series are used in laboratories of the widest profile: at food and light industry enterprises, in scientific and educational workshops, in chemistry classrooms, quality control centers, medical organizations and many others.

The case is metal, powder–painted (RAL 7035) with the texture of shagreen leather , double metal facades with a noise suppressor, opening angle 270° handles – polypropylene adjustable supports cabinet with 2 doors and 2 drawers LAB-PRO VOLUME 2: upper compartment with 2 drawers: telescopic guides of full extension internal size of the drawer: 860 mm long cabinet – 350*410* 85mm permissible load on the box – 30kg

The Korsa NV-1800 SHVD laboratory fume cupboard is a two—frame cabinet with a width of 1800 mm with a table top made of polypropylene. External dimensions of the cabinet (W×D×H): 1800×700×1960 mm. Dimensions of the working area (W×D×H): 1768×540×750 mm. Table top: polypropylene. A reliable fume cupboard for laboratories Working surface material: monolithic polypropylene. It is moisture-resistant, resistant to prolonged exposure to concentrated acids, alkalis and organic solvents. Poorly resistant to high temperatures. Polypropylene countertops are suitable for chemical laboratories that work a lot with concentrated inorganic acids and alkalis. The working area is closed by two independent lifting frames with counterweights. It has two exhaust zones: the hood of the exhaust box and the level of the countertop. Diameter of the flange for connection to the ventilation system: 150 mm. Working area size (W×D×H): 1768×540×750 mm. Please note that the cabinet narrows upwards. At a height of 50 cm, the depth of the working area will be 410 mm, at a height of 70 cm: 365 mm. If you need to place high equipment, then make sure that it corresponds to the dimensions of the camera, otherwise you will not be able to close the cabinet. The height of the raised glass above the cabinet: 510 mm, that is, with the glass raised, the total height of the cabinet will be 2470 mm. The working area is illuminated by an LED lamp (included in the package). The switch is located on the right-hand side of the cabinet, next to the sockets. The fume cupboard is equipped with two sockets, one of them with grounding. Sockets have the IP20 degree of protection, maximum load: 1.5 kW. The base of the cabinet is an all-welded metal frame in powder coating. The side laminated panels (chipboard 16 mm thick) are edged on the facade with a durable 2 mm PVC edge, which increases their impact resistance and mechanical strength. The cabinet legs are adjustable in height within two centimeters, allowing you to place the cabinet even on a rather uneven floor.