Laboratory island high table CO-180.160.90

Combined work surface: main countertop - KG (porcelain stoneware), 650 mm deep / auxiliary countertop made of TRESPA material with a depth of 150 mm Length, mm: 1200 Depth, mm: 800 Height, mm: 900 BASIC EQUIPMENT The base is a collapsible frame made of rectangular steel profile, painted with powder paint (RAL 7035) with the texture of shagreen leather Hidden fasteners Two easily removable rear screens (RAL 7035) and one non-removable (RAL 5023) Rear side boxes

Furniture for laboratory work. Table-sink on a support pedestal made of metal LAB-M MO ME 150.60.90 PP Width: 1500 Depth: 600 Height: 900 Package contents: table top – a single module made of polypropylene Attention! It is not recommended to use it for work with oil and petroleum products (fuel oil, bitumen, etc.) The inner size of the bowl – 500*400*285 mm The base of the sink table is a metal support pedestal. All-welded frame painted with dark grey powder paint RAL 7011. The bottom and top of the housing are sheet steel painted with powder paint of dark gray RAL 7011, the side walls are made of sheet steel painted with powder paint of white RAL 9016. Facades – laminated MDF of white color with a thickness of 16 mm, dark gray ABS edging

Metal double support cabinet with 2 doors and top drawer Length, mm: 1160 Depth, mm: 500 Height, mm: 860 Completely made of powder-coated steel (RAL 7035) with the texture of shagreen leather Frameless housing design Two compartments. The upper one has a drawer, the lower one has 2 hinged doors. The side walls and facades are double. The thickness of the side walls is 19 mm, the facades are 18 mm The facades are filled with noise-absorbing material The doors are equipped with a lock Hinges with an opening angle of 270o Handles – polypropylene Easy-to-remove shelf in the lower compartment with the possibility of installation at 3 different height levels. The shelf has a lock. The permissible load on the shelf is 30 kg. Telescopic guides of full extension Internal size of the drawer: 1070*410*85 mm The permissible load per box is 20 kg. Hidden adjustable supports (0 - 40 mm). The adjustment of the supports is carried out from inside the pedestal through the base of 8 standard versions of the working surfaces of LAB-PRO RP

Furniture for laboratory work. WASHING TABLE ON A METAL SUPPORT STAND LAB-M MO13 ME 50.60.90 SS Width, mm: 500 Depth, mm: 600 Height, mm: 900 equipment: The table top is a single module made of SUS 201 stainless steel (analogous to AISI 201). Attention! The product is recommended to be used only for work with non-aggressive substances. For work with various reagents except mineral acids, it is recommended to use washing tables made of AISI 304 stainless steel. the inner size of the bowl: LAB-M MO13 50.60.90 SS – 340*420* 130mm The base of the sink table is a metal support pedestal. The lower part is an all–welded frame painted with dark gray powder paint RAL 7011. The bottom and top of the housing are sheet steel painted with powder paint of dark gray RAL 7011, the side walls are made of sheet steel painted with powder paint of white RAL 9016. Facades – laminated MDF of white color with a thickness of 16 mm, dark gray ABS edging

One-piece table top: TRESPA TopLabPlus 16 mm Length, mm: 1500 Depth, mm: 1500 Height, mm: 750 BASIC EQUIPMENT The base is a collapsible metal frame made of rectangular steel profile, painted with powder paint (RAL 7035) with the texture of shagreen leather Four easily removable screens (RAL 7035) and two non-removable (RAL 5023) Hidden fasteners Adjustable supports (0-40 mm) A set of end boxes-plugs

Furniture for laboratory work. Exhaust cabinet made of chipboard Working surface: FRIDURIT (20 mm) Overall dimensions: Length, mm: 1800 Depth, mm: 740 Height, mm: 2100 equipment Working box front anti–spill side - acid–resistant polished stainless steel AISI 316 housing - white chipboard with a thickness of 16mm guide posts – aluminum profile painted with powder paint dark gray (RAL 7011) 2 dependent lifting screens – tempered glass in aluminum frames, lifting 0-710mm, do not change the dimensions of the cabinet when lifting.

It is an open metal laboratory shelving system with a gray polymer coating. It is possible to choose the depth of the rack from several options - 300, 400, 500 and 600 mm. The basic configuration has 4 shelves, but if necessary, the number of shelves can be increased. The distributed load capacity of a shelf is up to 80 kg, the total load capacity of a shelving system is up to 400 kg. It is possible to connect shelving systems to each other in the section. 1. ST-13-3 Width - 1000 STEEL- 12 110 ₽ Width - 1000 STEEL-13,930 ₽ 3. ST-13-5 Width - 100 STEEL-15 260 ₽ 4. ST-13-6 Width-1000 STEEL-16 420 ₽

Furniture for laboratory work. Mounted storage cabinet Length, mm: 800 Depth, mm: 350 Height, mm: 700 PACKAGE CONTENTS the case is white melamine with a thickness of 16 mm, the ABS edge is dark gray two compartments. The left compartment with a swing door, the right one is open the facade of the left compartment is white melamine with a dark gray ABS edge in the right compartment there is 1 built–in shelf, in the left compartment there is 1 easily removable shelf with the possibility of rearrangement at 5 levels in height the permissible load on the shelf is 20 kg.

NV-1500 OH is an island table with a superstructure that can be placed in the center of the laboratory and organize workplaces on both sides. Table top depth: 152 cm. It is designed for standing work: the height from the floor to the table top is 85 cm. A lamp and two sockets are built into the superstructure on each side. External dimensions of the table (W×D×H): 1520×1520×1650 mm. Work surface for your tasks We offer tables with various work surfaces. Table Model: Tabletop NV-1500 OLH: Laminate. It is relatively moisture-resistant, resistant to short-term exposure to acids, alkalis and organic solvents. This countertop does not tolerate strong heating or prolonged exposure to solvents, concentrated acids and alkalis. NV-1500 OKH: Porcelain tile. It is a practical solution for most chemical, biological, medical laboratories and workshops. You can put drying cabinets, baths and other heating devices on it. NV-1500 OSPH: Chemically resistant plastic. It is a good choice for training workshops, analytical and medical laboratories. It does not tolerate high temperatures well, heating devices should not be placed on the surface. NV-1500 OPX: Polypropylene. It is chemically resistant, being a specialized solution for chemical laboratories that work a lot with concentrated inorganic acids and alkalis. It is not resistant to high temperatures. A table for convenient work in the laboratory The superstructure allows you to compactly place the necessary reagents and laboratory utensils next to the workplace. Its depth is 30 cm, and its height is 80 cm. This table has plumbing fixtures: a faucet and a small sink-drain made of polypropylene resistant to aggressive chemicals built into the countertop. Its diameter is 135 mm and its depth is 110 mm. The working area on each side is illuminated by a fluorescent lamp (included in the package). The switch is located on the left-hand side of the superstructure. There are also two sockets, one of which is grounded. The sockets (with two on each side, there are four of them in total) have the IP20 degree of protection, maximum load: 1.5 kW. Two cabinets are built into the table on each side, one with a hinged door and a shelf inside, the other with three pull-out drawers. You can store there laboratory utensils or small things you need at hand. The side laminated panels of the table (chipboard 16 mm thick) are edged on the facade with a 2 mm PVC edge, which increases their impact resistance and mechanical strength. The legs of the table are adjustable in height within two centimeters, allowing you to place it even on a rather uneven floor.

The permissible distributed load on the table is up to 250 kg. 1. LC-900 SL Width – 900 CPL- 26 730 ₽ CERAMICS- 28 080 ₽ GRANTEC- 35 070 ₽ STAINLESS STEEL. STEEL- 37,370 ₽ LAB HPL- 36 110 ₽ 2. LC-1200 SL Width – 1200 CPL- 31 670 ₽ CERAMICS- 33,830 ₽ GRANTEC- 42 680 ₽ STAINLESS STEEL. STEEL- 45 610 ₽ LAB HPL- 44 900 ₽ 3. LC-1500 SL Width – 1500 CPL- 37 800 ₽ CERAMICS- 40 180 ₽ GRANTEC- 51 740 ₽ STAINLESS STEEL. STEEL- 55 210 ₽ LAB HPL- 54 100 ₽ 4. LC-1800 SL Width – 1800 CPL- 42 800 ₽ CERAMICS- 44 720 ₽ GRANTEC- 59 260 ₽ STAINLESS STEEL. STEEL- 63 100 ₽ LAB HPL- 61 570 ₽

The material of the working surface is monolithic, water-resistant, chemical resistant laboratory plastic (Lab HPL). One-piece sink (without welds) made of AISI 304 stainless steel (analog of Russian 08X18N10T and 12X18N10T). The sink is installed below the level of the work surface for ease of operation. 1.LK-600 SMS (1 sink, 1 mixer) Width - 600 CHIPBOARD- 42 280 ₽ 2. LK-900 SMS (1 sink, 1 mixer) Width - 900 CHIPBOARD - 46 730 ₽ 3. LK-1200 SMS (1 sink, 1 mixer) Width - 1200 CHIPBOARD - 55 690 ₽ 4. LK-1200 SMS (2 sinks, 1 mixer) Width - 1200 CHIPBOARD - 76 450 ₽ 5. LK-1500 SMS (1 sink, 1 mixer) Width - 1500 Chipboard- 62 160 ₽ 6. LK-1500 SMS (2 sinks, 1 mixer) Width - 1500 CHIPBOARD - 80 700 ₽

Furniture for laboratory work. Washing table on a metal support stand LAB-M MO ME 120.65.90 T6V Width, mm: 1200 Depth, mm: 650 Height, mm: 900 Equipment: Table top – TRESPA TopLabPlus is a monolithic slab of ultra-high pressing thickness of 6 mm with a chemically resistant surface made of polyurethane-acrylic composition, the lining material is moisture–resistant plywood with a thickness of 15 mm; the table top is edged with a dark gray plastic edge 1 built–in bowl - epoxy compound VITE. The location of the bowl in the center, fixing the bowl flush with the level of the countertop. Inner bowl size – 450*365*280 mm The base of the sink table is a metal support pedestal. All-welded frame painted with dark grey powder paint RAL 7011. The bottom and top of the housing are sheet steel painted with powder paint of dark gray RAL 7011, the side walls are made of sheet steel painted with powder paint of white RAL 9016. Facades – laminated MDF of white color with a thickness of 16 mm, dark gray ABS edging

Kors NV-1200 SHV-B laboratory fume hoods are single—frame cabinets with a width of 1100 mm with a countertop made of granite tiles. External dimensions of the cabinet (W×D×H): 1100×700×1960 mm. Dimensions of the working area (W×D×H): 1068×540×750 mm. Table top: granite tiles. Convenient fume cupboards for comfortable work in the laboratory The cabinet is available in two versions: with a hood from the lower cabinet and without it. In a cabinet with a hood, various aggressive reagents can be stored, in a cabinet without a hood, it is better to store only laboratory glass or instruments. Working surface material: porcelain tile. It is moisture-resistant, perfectly withstands high temperatures. It is resistant to prolonged exposure to concentrated acids, alkalis and organic solvents. It has limited resistance to hydrofluoric acid. This is one of the most popular choices for work surfaces, suitable for most laboratories. Drying cabinets or other highly heated appliances can be placed on such a countertop. The working area is closed by a single lifting frame with a counterweight. It has two exhaust zones: the hood of the exhaust box and the level of the countertop. Diameter of the flange for connection to the ventilation system: 150 mm. Working area size (W×D×H): 1068×540×750 mm. Please note that the cabinet narrows upwards. At a height of 50 cm, the depth of the working area will be 410 mm, at a height of 70 cm: 365 mm. If you need to place high equipment, then make sure that it corresponds to the dimensions of the camera, otherwise you will not be able to close the cabinet. The height of the raised glass above the cabinet: 510 mm, that is, with the glass raised, the total height of the cabinet will be 2470 mm. The working area is illuminated by a fluorescent lamp (included in the package). The switch is located on the right side of the cabinet, next to the sockets. The fume cupboard is equipped with two sockets, one of them with grounding. Sockets with IP20 degree of protection, maximum load: 1.5 kW. The base of the cabinet is an all-welded metal frame in powder coating. The side laminated panels (chipboard with a thickness of 16 mm) are edged with a durable PVC edge with a thickness of 2 mm, which increases their impact resistance and mechanical strength. The legs of the cabinet are adjustable in height within two centimeters, allowing you to place the cabinet even on a rather uneven floor.

NV-1200 Lv are laboratory tables with a metal frame and a tabletop width of 1090 mm. They are designed for standing work (table height — 850 mm). The NV-1200 tables have a metal frame painted with durable powder paint. The side laminated panels (chipboard 16 mm thick) are edged on the facade with a 2 mm PVC edge, which increases their impact resistance and mechanical strength. The legs of the table are adjustable in height within two centimeters, allowing you to place it even on a rather uneven floor. Dimensions of the table when assembled (W×D ×H): 1090×700×850 mm. The working surface for your tasks We offer laboratory tables with various working surface materials. Version: Countertop NV-1200 LLv: Laminate. An inexpensive solution, suitable for school chemistry and physics classrooms, office work, placement of devices. NV-1200 LSPv: Chemically resistant plastic. A good choice for training workshops, analytical and medical laboratories. It does not tolerate high temperatures, heating devices should not be placed on the surface. NV-1200 LKv: Porcelain tile. A practical solution for most chemical, biological, medical laboratories and workshops. You can put drying cabinets, baths and other heating devices on it. NV-1200 LPv: Polypropylene. A specialized solution for chemical laboratories working with inorganic solvents. NV-1200 LNv: Stainless steel. Stainless steel is well suited for biological or medical laboratories, but it is not recommended for use in chemical laboratories. It has limited resistance to short-term exposure to concentrated mineral acids and alkalis and is destroyed by prolonged exposure to concentrated acids. Advantages of NV-1200 Lv tables An inexpensive solution for laboratories that value the reliability and durability of furniture; Suitable for small rooms; Heating plates or baths can be placed on the granite surface resistant to high temperatures; It is convenient to work while standing: the height of the working surface is 85 cm. Application of NV-1200 Lv tables Tables of the NV series are used in laboratories of the widest profile: at food and light industry enterprises, in scientific and educational workshops, in chemistry classrooms, quality control centers, medical organizations and many others.

BASIC EQUIPMENT The base is a collapsible frame made of rectangular steel profile, painted with powder paint (RAL 7035) with the texture of shagreen leather Hidden fasteners Two easily removable rear screens (RAL 7035) and one non-removable (RAL 5023) Rear side boxes Adjustable supports (0-40 mm)