Furniture

848 products
View:
  • Selected: 0
    Applying
  • Selected: 0
    Names
    Loading...
  • Selected: 0
    Manufacturer
  • Selected: 0
    Made in
  • Selected: 0
    Additional
All filters
  • 9
    Applying
  • 42
    Names
    Loading...
  • 9
    Manufacturer
  • 8
    Made in
  • 8
    Additional
View:
848 products
NV-1500 SHV-B-NERZH Fume cupboard with stainless steel countertop
NV-1500 SHV-B-NERZH Fume cupboard with stainless steel countertop
from 81 338 ₽
The Korsa NV-1500 SHV-NERZH Laboratory fume cupboards are single—frame cabinets with a width of 1410 mm with a stainless steel countertop. External dimensions of the cabinet (W×D×H): 1410×700×1960 mm. Dimensions of the working area (W×D×H): 1378×540×750 mm. Table top: stainless steel. Convenient fume cupboards for comfortable work in the laboratory Working surface material: stainless steel. It is well suited for biological or medical laboratories, but it is not recommended for use in chemical laboratories. It is resistant to prolonged exposure to temperature, organic solvents, and oils. It has limited resistance to short-term exposure to concentrated mineral acids and alkalis and is destroyed by prolonged exposure to concentrated acids. The working area is closed by a single lifting frame with a counterweight. It has two exhaust zones: the hood of the exhaust box and the level of the countertop. Diameter of the flange for connection to the ventilation system: 150 mm. Working area size (W×D×H): 1378×540×750 mm. Please note that the cabinet narrows upwards. At a height of 50 cm, the depth of the working area will be 410 mm, at a height of 70 cm: 365 mm. If you need to place high equipment, then make sure that it corresponds to the dimensions of the camera, otherwise you will not be able to close the cabinet. The height of the raised glass above the cabinet: 510 mm, that is, with the glass raised, the total height of the cabinet will be 2470 mm. The working area is illuminated by an LED lamp (included in the package). The switch is located on the right-hand side of the cabinet, next to the sockets. The fume cupboard is equipped with two sockets, one of them with grounding. Sockets have the IP20 degree of protection, maximum load: 1.5 kW. The base of the cabinet is an all-welded metal frame in powder coating. The side laminated panels (chipboard with a thickness of 16 mm) are edged with a durable PVC edge with a thickness of 2 mm, which increases their impact resistance and mechanical strength. The cabinet legs are adjustable in height within two centimeters, allowing you to place the cabinet even on a rather uneven floor.
NV LAB
Moscow
Produced in: Moscow, Moscow region
BUILT-IN DRAWER UNITS (WITH 3 DRAWERS) HEIGHT 900 MODELS: LK-400 TYA-In (WITH 3 DRAWERS), LK-450 TYA-IN (WITH 3 DRAWERS), LK-600 TYA-IN (WITH 3 DRAWERS), LK-750 TYA-IN (WITH 3 DRAWERS), LK-900 CHA-IN (WITH 3 DRAWERS)YY
BUILT-IN DRAWER UNITS (WITH 3 DRAWERS) HEIGHT 900 MODELS: LK-400 TYA-In (WITH 3 DRAWERS), LK-450 TYA-IN (WITH 3 DRAWERS), LK-600 TYA-IN (WITH 3 DRAWERS), LK-750 TYA-IN (WITH 3 DRAWERS), LK-900 CHA-IN (WITH 3 DRAWERS)YY
from 11 000 ₽
1. LK-400 TYA-V (with 3 drawers) Width- 400 Chipboard- 11,000 ₽ Steel-20,980 ₽ 2. LK-450 TYA-V (with 3 drawers) Width- 450 CHIPBOARD- 11 360 ₽ Steel- 21 060 ₽ 3. LK-600 TYA-V (with 3 drawers) Width- 600 CHIPBOARD- 15 530 ₽ Steel- 24,950 ₽ 4. LK-750 TYA-V (with 3 drawers) Width- 750 CHIPBOARD- 18 600 ₽ Steel- 27 030 ₽ 5. LK-900 TYA-V (with 3 drawers) Width- 900 CHIPBOARD- 19 300 ₽ Steel- 31 070 ₽
SpetsBaltMebel
г. Санкт- Петербург
Produced in: Saint Petersburg
Island LAB table-1200 OL
Island LAB table-1200 OL
EQUIPMENT rack support racks – aluminum profile painted with powder paint (RAL 1001) top panel with a depth of 190mm – metal painted with powder paint (RAL 1001)
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Laboratory LAB table-900 LFn
Laboratory LAB table-900 LFn
equipment side decorative panels – melamine 16mm thick all-welded frame made of rectangular metal profile painted with white powder paint adjustable supports
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Laboratory LAB table-1200 LT
Laboratory LAB table-1200 LT
PACKAGE CONTENTS case – melamine 16mm thick 1 drawer, inner drawer size – 400*470* 100mm 2 splash-proof sockets with cover (IP20 1.5kW) 2 automatic emergency power off 16A 2 all-welded frames made of rectangular metal profile painted with white powder paint adjustable supports
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Wall-mounted table LAB-1800 PKT
Wall-mounted table LAB-1800 PKT
EQUIPMENT rack support racks – aluminum profile painted with powder paint (RAL 1001) top panel with a depth of 190mm – metal painted with powder paint (RAL 1001)
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Cabinet for storing dishes, documents SHL-90.50.202.M
Cabinet for storing dishes, documents SHL-90.50.202.M
900 mm wide, 2025 mm high cabinet made of painted steel for storing laboratory utensils and documents. Two compartments with two metal shelves in each. The upper and lower doors are made of steel. Overall dimensions 900x500x2025 mm Weight 95 kg
Produced in: Tomsk
Cupboard for dishes LAB-M SHP 50.50.194
Cupboard for dishes LAB-M SHP 50.50.194
Furniture for laboratory work. Cupboard for dishes Length, mm: 500 Depth, mm: 500 Height, mm: 1940 PACKAGE CONTENTS housing – white melamine with a thickness of 16 mm, ABS edge of dark gray color facades – tinted light gray glass 2 compartments (the upper one is 686 mm high, the lower one is 1076 mm high) 5 shelves (1 built-in, 4 removable (1 in the upper compartment, 3 in the lower) with the possibility of rearrangement at 3 levels in height each).
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Wall-mounted low table LAB-PRO SPCn 150.80.75 KG-ESS
Wall-mounted low table LAB-PRO SPCn 150.80.75 KG-ESS
BASIC EQUIPMENT The base is a collapsible frame made of rectangular steel profile, painted with powder paint (RAL 7035) with the texture of shagreen leather Hidden fasteners Two easily removable rear screens (RAL 7035) and one non-removable (RAL 5023) Rear side boxes Adjustable supports (0-40 mm)
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Laboratory LAB table-900 LTn
Laboratory LAB table-900 LTn
equipment side decorative panels – melamine 16mm thick all-welded frame made of rectangular metal profile painted with white powder paint adjustable supports
LOIP
Saint Petersburg
Produced in: Saint Petersburg
Wall-mounted table LAB-1500 PFTM
Wall-mounted table LAB-1500 PFTM
equipment sink-drain (polypropylene, internal size 250*100*150mm), laboratory faucet for water the scope of delivery includes a siphon corrugated hose flexible liner length 1200mm rack support racks – aluminum profile painted with powder paint (RAL 1001) top panel depth 190mm – metal painted with powder paint (RAL 1001)
LOIP
Saint Petersburg
Produced in: Saint Petersburg