Search

It is intended for filling with a solution (chemical reagents, reagents, biological fluids, etc. in concentrations used in clinical and diagnostic laboratories, with the exception of concentrated organic solvents) with the subsequent selection of this solution by dispensers during diagnostic studies in medical and preventive and research laboratories. Made of polystyrene. The bath for multichannel dispensers is a non-sterile product of single use. ON THE OTHER 22.29.29-026-29508133-2017 , 60 ml, p/s, pack.5/30pcs, minimal.

Designed for dosing of various solutions. It consists of a bottle with a narrow neck and a lid with a dropper (with a long spout and a removable cap on the chord). It has a relief graduation. The length of the spout is 40 mm. Made of polyethylene. It is not subject to autoclaving.

The jar for reagents, dark glass PrimeLab, 10000 ml is equipped with a lid that closes firmly thanks to the GL45 thread on the neck of the container. Protects against leakage and evaporation. The wall has an area for notes and a measuring scale for quickly determining the volume of contents. Characteristics: • Volume – 10000 ml • Height – 410 mm • Diameter – 234 mm • Thread - GL45.

Refrigerator KhSh-1-400 29/32 Primelab is a small laboratory accessory designed for cooling vapors and reagents. Inside it there are small balls along which vapors move and cool due to energy loss. Additional cooling can be achieved by running running water over the jacket. The design of the refrigerator includes a core section (29/32), thanks to which it can be connected to laboratory equipment. Its total length is 56 cm with a working part length of 40 cm.

Design features: Microprocessor temperature controller; Four-sided heating; Shut-off forced air circulation in the working chamber; The material of the chamber is steel painted with heat–resistant paint; Bright LED display; Conveniently located control panel; LED indicators of heater operation and protection operation; Alarm when the current temperature exceeds the limits of the permissible range; Reliable door closing mechanism; High-quality silicone sealer; Highly efficient thermal insulation of the housing; The case is made of high-quality sheet steel and painted with heat-resistant powder paint; Number of shelves: standard – 1, maximum – 5. Technical specifications: Maximum heating temperature, °C +350 The error of reproducing the set temperature ° C ± 3 Temperature maintenance error, ° C ± 1 Warm-up time to the maximum temperature, no more, min 45 Dimensions of the working chamber, (WxHxD), not less than 250x275x250 mm Overall dimensions, (WxHxD), not more than 595x495x565 mm Rated supply voltage, 220 V Rated power, W 1200

An exhaust cabinet for heating furnaces. The chamber of the laboratory fume cupboard is sheathed with ceramic granite (30x30 cm) from the inside. The camera housing is made of chipboard (16 mm). The base of the cabinet is an all-welded metal frame in powder coating. The side laminated panels (chipboard with a thickness of 16 mm) are edged along the facade with a durable PVC edge with a thickness of 2 mm, which increases their impact resistance and mechanical strength. Exhaust laboratory cabinets are used when working with toxic and harmful volatile materials, with clean materials, with dissolution or decomposition under heat treatment, during sample analysis and many others. The standard version of the cupboard has a countertop of the exhaust laboratory cabinet made of ceramic granite. Porcelain stoneware (tile) has a number of advantages: it is resistant to prolonged exposure to acids, alkalis and organic solvents, it has higher mechanical resistance, it withstands high temperatures, it has limited resistance to hydrofluoric acid. Many possible variants of table tops resistant to aggressive materials make the fume cupboard indispensable for any laboratory. The complete set of the fume cupboard includes: a working chamber: a lifting screen with counterweights, a granite table top; an exhaust pipe on the cabinet lid with a diameter of 150 mm; grounded and not grounded electrical outlets (2 items); powder-coated metal frame (25x25 mm); legs height-adjustable within 15 mm.

Design features: Programmable microprocessor temperature controller; Three programs of ten steps with the ability to set temperature, temperature change rates and exposure time; Manual heating mode with timer with sound notification; Reliable and stable Pt 100 temperature sensor; Four-sided heating; Forced air circulation in the working chamber; Camera material – stainless steel; Backlit graphic display; Conveniently located control panel; Sound and light alarm when the current temperature exceeds the limits of the permissible interval; Independent overheating protection circuit with separate temperature sensor; Reliable door closing mechanism; High-quality silicone sealer; Highly efficient thermal insulation of the housing; The case is made of high-quality sheet steel and painted with heat-resistant powder paint; Number of shelves: standard – 1, maximum – 5. Technical specifications: Maximum heating temperature, °C +350 The error of reproducing the set temperature ° C ± 3 Temperature maintenance error, ° C ± 1 Warm-up time to maximum temperature, no more, min 45 Dimensions of the working chamber, (WxHxD), not less than 250x275x250 mm Overall dimensions, (WxHxD), not more than 595x495x565 mm Rated supply voltage, 220 V Rated power, W 1200

The tube is conical with a "skirt", designed for centrifugation of biological and other liquids. The test tube is closed with a screw cap, equipped with a stability skirt (for convenient placement in an upright position). The divisions are applied with white paint resistant to erasure. There is also a field for recording. The conical tube is made of polypropylene, which allows it to be autoclaved in standard mode. Relative centrifugal acceleration 3000g

The polymer tip is suitable for most modern dispensers of the Lenpipet, Finpipette, Gilson, Eppendorf, Socorex brands. With a filter. Non-sterile. TU 32.50.50-030-29508133-2019

Overall dimensions with raised protective shield 1805x800x2270 mm Overall dimensions with lowered protective shield 1805x800x2100 mm The diameter of the exhaust pipe is 200 mm Weight 300 kg Power supply 220 V, 50 Hz, 16 A

The cup is made of translucent polypropylene. Non-sterile. Combines the advantages of glass and polystyrene cups. Its reusable sterilization in an autoclave is possible (+121 ° C), and, at the same time, the product has a small weight and is less fragile than glass and polystyrene. Suitable for sanitary microbiological studies in research laboratories. Ventilated.

The PrimeLab screw cap tube holds 30 ml. The throat diameter is 20 mm with a height of 150 mm. Suitable for various laboratory processes involving reagent storage, experimentation, transportation, etc. The screw cap creates a sealed connection to the tube, thereby protecting the contents from external influences and preventing leakage. In some cases, this is extremely important and can affect the final outcome of an experiment or other laboratory process.