Search

Table top to the island table on the support tables Material: LAMINATE Length, mm: 1200 Depth, mm: 1500

Furniture for laboratory work. Table-sink LAB-M MO 80.65.90 T6V Width, mm: 800 Depth, mm: 650 Height, mm: 900 equipment: Table top – TRESPA TopLabPlus – monolithic slab of ultra-high pressing thickness of 6mm with a chemically resistant surface made of polyurethane-acrylic composition, on a substrate of wood-containing material (plywood 15mm or melamine 16mm), edged around the perimeter of PVC edge 2mm 1 built–in bowl - epoxy compound VITE. The location of the bowl in the center, fixing the bowl flush with the level of the countertop. Inner bowl size – 450*365*280 mm The base of the sink table is a support pedestal made of white melamine Facades – laminated MDF of white color with a thickness of 16 mm, dark gray ABS edging Without shelves

It will help relay protection and automation services, the chief power engineer of industrial enterprises and a wide range of specialists engaged in setting up, monitoring, diagnostics and operation of electrical installations to solve the following tasks: − record emergency waveforms on 4 current channels and 4 voltage channels, with data stored in COMTRADE format - take daily load schedules and carry out long−term monitoring of the parameters of the power grid (recorder) - to monitor the conduct of switching in switchgear − identify the causes of the emergency mode − to evaluate the correctness of the operation of the RSiA and PA devices − determine the harmonic composition of current and voltage (up to and including the 14th harmonic) − control phase alternation − remove the voltage characteristics − measure the phase shift angle and perform the construction of vector diagrams of voltage and current − control the circuits in the SHPT − check the integrity of electrical conductors (ringing) − carry out maintenance of relay protection circuits and power circuits of electrical installations − monitor the status and diagnostics of DC circuits

The material of the working surface is monolithic, water-resistant, chemical resistant laboratory plastic (Lab HPL). One-piece sink (without welds) made of AISI 304 stainless steel (analog of Russian 08X18N10T and 12X18N10T). The sink is installed below the level of the work surface for ease of operation. 1.LK-600 SMS (1 sink, 1 mixer) Width - 600 CHIPBOARD- 42 280 ₽ 2. LK-900 SMS (1 sink, 1 mixer) Width - 900 CHIPBOARD - 46 730 ₽ 3. LK-1200 SMS (1 sink, 1 mixer) Width - 1200 CHIPBOARD - 55 690 ₽ 4. LK-1200 SMS (2 sinks, 1 mixer) Width - 1200 CHIPBOARD - 76 450 ₽ 5. LK-1500 SMS (1 sink, 1 mixer) Width - 1500 Chipboard- 62 160 ₽ 6. LK-1500 SMS (2 sinks, 1 mixer) Width - 1500 CHIPBOARD - 80 700 ₽

Technical specifications: Melt flow rate for 10 min, g 0.1 - 99.9 The dimensions of the capillary opening, mm dia. 2,095 diam. 1,048 (optional) diam. 1,180 (optional) Set of loads, kg 0,325-5 10-21,6 (optional) Temperature range in the working chamber, °C +50...+450 Accuracy of temperature maintenance, °C: - in the range of 50...300 °C: ± 0.1 - in the range of 300...350 ° C: ± 0.2 - in the range of 350...450°C: ±0.3 The discreteness of setting the temperature of the chamber, ° C 1 Time to enter the operating mode, no more, min 40 Power supply, V/kW 220/0.8 Installation dimensions, WxDxH mm 513x445x590 (920 is the maximum height with a fully loaded polymer chamber and a full stack of loads with a handle for their installation) Installation weight, not more than 70 kg

Devices capable of generating oxygen have found application in various fields of medicine. The equipment is also used in training centers, educational institutions and oxygen rooms. Medical oxygen concentrators allow to accelerate the recovery of patients suffering from cardiovascular diseases, chronic respiratory diseases, as well as other pathologies that make it difficult to saturate the blood with oxygen. The concentrator is a mandatory equipment of the departments of anesthesiology and intensive care. Oxygen concentrators demonstrate high efficiency in restorative treatment. Unlike oxygen sources that use compressed gas, generators are safe and economical. Capacity: 140 l/min 8.4 m3/h 11.2 kg/h Oxygen purity: 95 % Oxygen pressure: 4-5 bar

BASIC EQUIPMENT Working box guide racks – aluminum profile painted with powder paint (RAL 7035/RAL 5023)in the right rack there are a light switch and 2 splash-proof sockets with a 3.2kW cover (IP54) the front anti–spill side is acid-resistant polished stainless steel AISI 304 side panels – tempered glass 2 dependent lifting screens – tempered glass in aluminum frames, lifting 0-780mm, do not change the dimensions of the cabinet when lifting the upper fixed screen – metal painted with powder paint (RAL 5023) with the texture of shagreen leather on the top panel: LED lamp dust- and moisture-proof (22W IP65) switching box with automatic emergency power off 16A flange d=250mm (the distance from the back panel to the center of the flange is 170mm) easily removable exhaust canopies 3 levels of exhaust (lower, side and front) counterweights are placed in the front pillars-pylons and are easily serviced by the rear and upper panels – polypropylene Frame base is a collapsible frame made of a rectangular metal profile painted with powder paint (RAL 7035) with the texture of shagreen leather service panel is a metal box painted with powder paint (RAL 5023) with the texture of shagreen leather: adjustable supports.

Design features: Special system of air intake and exhaust of combustion products with adjustable thrust; Programmable microprocessor temperature controller; Three programs of ten steps with the ability to set the temperature, heating speed and holding time for each step; Manual heating mode with timer with sound notification and auto-off; Durable ceramic muffle; Closed heaters on four sides of the chamber; Backlit graphic display; Conveniently located control panel; Automatic shutdown of heating when opening the door; Sound and light alarm; Highly efficient thermal insulation of the housing; The furnace body is made of high-quality sheet steel and painted with heat-resistant powder paint. Technical specifications: Maximum heating temperature, °C +1100 Temperature stability in steady-state thermal mode, °C ± 10 Warm-up time to maximum temperature, no more than 120 min Dimensions of the working chamber, WxHxD, not less than 200x110x190 mm Overall dimensions, WxHxD, not more than mm 505x955x565 Rated supply voltage, 220 V Rated power, W 2800

1. LK-400 TYA-V (with 4 drawers) Width- 400 CHIPBOARD- 13 340 ₽ Steel-22,530 ₽ 2. LK-450 TYA-V (with 4 drawers) Width- 450 CHIPBOARD- 13 820 ₽ Steel- 23 360 ₽ 3. LK-750 TYA-V (with 4 drawers) Width- 600 CHIPBOARD- 18 030 ₽ Steel- 27,920 ₽ 4. LK-750 TYA-V (with 4 drawers) Width- 750 CHIPBOARD- 20 040 ₽ Steel- 29,980 ₽ 5. LK-900 TYA-V (with 4 drawers) Width- 900 CHIPBOARD-21 640 ₽ Steel- 33 060 ₽

EQUIPMENT table top – laminate 1 built–in bowl - stainless steel SUS 201 (analog AISI 201) ATTENTION! The product is recommended to be used only for work with non-aggressive substances. inner bowl size – 330*400* 140mm cabinet body – melamine 16mm thick

Wall-mounted table One-piece table top: TRESPA TopLabPlus 16 mm Length, mm: 900 Depth, mm: 800 Height, mm: 900 BASIC EQUIPMENT The base is a collapsible frame made of rectangular steel profile, painted with powder paint (RAL 7035) with the texture of shagreen leather Hidden fasteners Two easily removable rear screens (RAL 7035) and one non-removable (RAL 5023) Rear side boxes Adjustable supports (0-40 mm)

Wall-mounted table One-piece table top: TRESPA TopLabPlus 16/23mm with a side made of composite material based on epoxy resins, the height of the side above the table top is 7 mm, the depth is 30 mm Length, mm: 900 Depth, mm: 800 Height, mm: 750 BASIC EQUIPMENT The base is a collapsible frame made of rectangular steel profile, painted with powder paint (RAL 7035) with the texture of shagreen leather Hidden fasteners Two easily removable rear screens (RAL 7035) and one non-removable (RAL 5023) Rear side boxes Adjustable supports (0-40 mm)