Search

The PrimeLab dark glass reagent jar is designed to work with a small amount of a substance of any consistency (up to 250 ml). A capacity scale is applied to its wall to quickly determine the volume of the contents of the substance. Made of durable glass that is wear-resistant. Characteristics: • Volume – 250 ml • Height – 1386 mm • Diameter – 70 mm • Thread - GL45.

NV-1200 SHV-M is the most low-budget exhaust cupboard of the NV line. It is single-frame, with a laminated countertop. It is intended mainly for analytical laboratories. External dimensions of the cabinet (W×D×H): 1100×700×1960 mm. Dimensions of the working area (W×D×H): 1068×540×750 mm. Table top: laminated chipboard. A minimalistic solution for your laboratory The NV-1200 SHV-M fume cupboard has a minimum of functions, which makes it the most inexpensive. The table top is made of laminated chipboard. It is relatively moisture-resistant, resistant to short-term exposure to acids, alkalis and organic solvents. This countertop does not tolerate strong heating or prolonged exposure to solvents, concentrated acids and alkalis. The working area is closed by one lifting frame with a counterweight. It has two exhaust zones: the hood of the exhaust box and the level of the countertop. Diameter of the flange for connection to the ventilation system: 150 mm. Working area size (W×D×H): 1068×540×750 mm. Please note that the cabinet narrows upwards. At a height of 50 cm, the depth of the working area will be 410 mm, and at a height of 70 cm: 365 mm. If you need to place high equipment, then make sure that it corresponds to the dimensions of the camera, otherwise you will not be able to close the cabinet. The height of the raised glass above the cabinet: 510 mm, that is, with the glass raised, the total height of the cabinet will be 2470 mm. The working area is illuminated by a fluorescent lamp (included in the package). The switch is located on the right side of the cabinet body. The base of the cabinet is made on an all-welded metal frame in powder coating. The side laminated panels (chipboard 16 mm thick) are edged on the facade with a durable PVC edge 2 mm thick, which increases their impact resistance and mechanical strength. The cabinet legs are adjustable in height within two centimeters, allowing you to place the cabinet even on a fairly uneven floor. And what are the other options? In the line of NV-1200 cabinets there is a cabinet with plumbing and a surface made of granite tiles, as well as cabinets without plumbing, and with a surface made of monolithic ceramics, stainless steel, chemically resistant plastic. They are exactly the same size as the NV-1200 SHV-M. If you need a minimalistic cabinet of large sizes, you could be interesteed in the NV-1500 SHV-M model.

The PrimeLab round-bottomed tube with a screw cap is made of heat-resistant borosilicate glass, which can be exposed to temperature changes. Suitable for working with chemically active substances, toxic and even poisonous. Due to the lid, which is screwed onto the test tube in a screw manner, the contents are isolated from external influences and leakage. The volume of the tube is 5 ml with a length of 100 mm and a diameter of 12 mm.

The flat-bottomed flask P-1-500 Primelab is equipped with a 29/32 joint, which allows it to be connected to laboratory equipment and carry out various laboratory processes. Suitable for working with chemically active and aggressive substances whose volume does not exceed 500 ml. Made from durable borosilicate glass. A flat-bottomed flask is presented in the shape of a ball with a flat bottom and a high neck, the diameter of which is 110 mm. The total height of the product is 167 mm.

Desiccator 2-210 mm PrimeLab is made of light glass and does not have a tap. Designed to store and protect samples in a laboratory environment. Reliable design and precise humidity control create optimal conditions for specific tasks. It has compact dimensions: the diameter is 210 mm and the height is 275 mm, of which 95 are on the lid.

NV-1500 OH is an island table with a superstructure that can be placed in the center of the laboratory and organize workplaces on both sides. Table top depth: 152 cm. It is designed for standing work: the height from the floor to the table top is 85 cm. A lamp and two sockets are built into the superstructure on each side. External dimensions of the table (W×D×H): 1520×1520×1650 mm. Work surface for your tasks We offer tables with various work surfaces. Table Model: Tabletop NV-1500 OLH: Laminate. It is relatively moisture-resistant, resistant to short-term exposure to acids, alkalis and organic solvents. This countertop does not tolerate strong heating or prolonged exposure to solvents, concentrated acids and alkalis. NV-1500 OKH: Porcelain tile. It is a practical solution for most chemical, biological, medical laboratories and workshops. You can put drying cabinets, baths and other heating devices on it. NV-1500 OSPH: Chemically resistant plastic. It is a good choice for training workshops, analytical and medical laboratories. It does not tolerate high temperatures well, heating devices should not be placed on the surface. NV-1500 OPX: Polypropylene. It is chemically resistant, being a specialized solution for chemical laboratories that work a lot with concentrated inorganic acids and alkalis. It is not resistant to high temperatures. A table for convenient work in the laboratory The superstructure allows you to compactly place the necessary reagents and laboratory utensils next to the workplace. Its depth is 30 cm, and its height is 80 cm. This table has plumbing fixtures: a faucet and a small sink-drain made of polypropylene resistant to aggressive chemicals built into the countertop. Its diameter is 135 mm and its depth is 110 mm. The working area on each side is illuminated by a fluorescent lamp (included in the package). The switch is located on the left-hand side of the superstructure. There are also two sockets, one of which is grounded. The sockets (with two on each side, there are four of them in total) have the IP20 degree of protection, maximum load: 1.5 kW. Two cabinets are built into the table on each side, one with a hinged door and a shelf inside, the other with three pull-out drawers. You can store there laboratory utensils or small things you need at hand. The side laminated panels of the table (chipboard 16 mm thick) are edged on the facade with a 2 mm PVC edge, which increases their impact resistance and mechanical strength. The legs of the table are adjustable in height within two centimeters, allowing you to place it even on a rather uneven floor.

The Smart submersible reinforced probe L=1500 mm SZPGU.1500 is designed to measure the temperature of various materials by direct contact of the probe with the measuring object and transmitting the measured value via Bluetooth to devices with the ThermoMonitor, Android program installed. Operating conditions of the SZPGU.1500 smart probe Ambient temperature, °C: -20...+55. Relative humidity, %: not more than 80 at T=35 °C. Atmospheric pressure, kPa: 86...106. Functionality of the smart probe SZPGU.1500 Measurement of physical quantities with a resolution of 0.01. Recording of measured values at intervals from 5 seconds to 23 hours 59 minutes 59 seconds (only smart probes with built-in memory). Transmitting data about measured physical quantities via Bluetooth to a device with the ThermoMonitor, Android program installed. Transmitting information about the state of charge of the built-in battery via Bluetooth to a device with the ThermoMonitor, Android program installed. Automatic transition to sleep mode after 50 seconds. The ability to connect an external power supply. Possibility of calibration.

The NV-1400 T is a specialized wall—mounted table with a superstructure in which five racks for titration burettes are built. These tables are designed primarily for analytical or training laboratories with a large number of routine manual titration operations. External dimensions of the table (W×D×H): 1400×700×1650 mm. It is designed for standing work: the height from the floor to the countertop is 85 cm. Work surface for your tasks We offer tables with various work surfaces. Table Model: Tabletop The NV-1400 TL: Laminate. It is relatively moisture-resistant, resistant to short-term exposure to acids, alkalis and organic solvents. This countertop does not tolerate strong heating or prolonged exposure to solvents, concentrated acids and alkalis. The NV-1400 TK: Porcelain tile. A practical solution for most chemical, biological, medical laboratories and workshops. You can put on it drying cabinets, baths and other heating devices. The NV-1400 TSP: chemically resistant plastic. It is a good choice for training workshops, analytical and medical laboratories. It does not tolerate high temperatures well, heating devices should not be placed on the surface. The NV-1400 TP: Polypropylene. It is chemically resistant, neing a specialized solution for chemical laboratories that work a lot with concentrated inorganic acids and alkalis. It is not resistant to high temperatures. A white light-transmitting screen with backlight is built into the superstructure behind the burette racks. It makes the lighting of the work area soft and diffused, convenient for long work. The switch is located on the right-hand side of the superstructure. There are also two sockets, one of which is grounded. Sockets have the IP20 degree of protection, maximum load: 1.5 kW. The tables have a metal frame painted with durable powder paint. The side laminated panels (chipboard 16 mm thick) are edged with a PVC edge 2 mm thick, which increases their impact resistance and mechanical strength. The table legs are adjustable in height within two centimeters, allowing you to place it even on a rather uneven floor.

The surface smart probe L=500 mm SZPV.500 is designed to measure the temperature of various materials by direct contact of the probe with the measuring object and transmitting the measured value via Bluetooth to devices with the ThermoMonitor based on the Android program. Operating conditions of the SZPV.500 smart probe Ambient temperature, °C: -20...+55. Relative humidity, %: not more than 80 at T=35 °C. Atmospheric pressure, kPa: 86...106. Functionality of the SZPV.500 smart probe Measurement of physical quantities with a resolution of 0.01. Recording of measured values at intervals from 5 seconds to 23 hours 59 minutes 59 seconds (only smart probes with built-in memory). Transmitting data about measured physical quantities via Bluetooth to a device with the ThermoMonitor based on the Android program. Transmitting information about the state of charge of the built-in battery via Bluetooth to a device with the ThermoMonitor based on the Android program. Automatic transition to sleep mode after 50 seconds. The ability to connect external power. Possibility of calibration.

The VD-3-1000 PrimeLab pear-shaped separating funnel will help you quickly and effectively separate different types of substances, the volume of which does not exceed 1000 ml. Externally, it is pear-shaped with a core, tap and spout, the length of which is 70 mm with a total length of the entire funnel of 400 mm. The diameter of the spout is 12 mm, which is more than enough to work with substances of any consistency.

Low glass PrimeLab, N-1-5000 is a popular laboratory container, which is designed to work with reagents with a volume of no more than 5000 ml. There is a measuring scale on the wall to quickly determine the volume of the contents. The glass is made of heat-resistant glass that can withstand temperature changes up to 200°C. Suitable for intensive use due to its mechanical resistance and durability.

The AG-120TM generator is designed for localization and diagnostics of underground utilities (cables, pipelines). The maximum power of the generator is up to 300 watts (depending on the selected operating mode). The device has no equal in the qualitative indicator of the ratio: power-resource-dimensions-weight. Application of the AG-120TM generator To trace communications by electromagnetic method (cables, metal pipelines) and acoustic method (metal and non-metallic pipelines). To carry out a highly efficient search for cable damage sites. Carry out diagnostics of gas pipelines and determine the places of damage to the insulation of protective coatings. Work with any receiver due to the possibility of selecting any operating frequency in the range of 200-10000 Hz. Features of the AG-120TM generator Increased battery capacity compared to the AG-120T generator. Automatic matching for a given current in the load, instead of the output power, allows you to get the predicted signal level at the input of the search receiver. The multi-frequency (200-10000 Hz) multifunctional device can be equipped with any search receiver using this frequency range. Automatic selection of output power by an “intelligent” power selection program. The built-in “output multimeter” shows the voltage, current, resistance and power in the load. High output current (up to 15 A) makes it possible to work efficiently on “low-resistance” (up to short-circuit) loads (for example, grounded pipelines). High output voltage (220 V auto./330 V with complement. battery) allows you to effectively trace “high-resistance” long-range communications. Multifunctionality: operation without direct connection with a resonant transmitting antenna, inductive pliers, a shock mechanism and an isolation monitoring sensor. Ability to work in rainy weather (on/off; viewing parameters with the lid closed).