Search

A frost-resistant kit with a powerful generator that solves problems on metal and non-metallic pipelines designed for: • – search for underground utilities (power and signal cable lines, reinforced fiber-optic lines, pipelines made of electrically conductive materials), as well as determining the depth of their occurrence and places of damage. • – determination of the location of power cable lines by induction and acoustic methods. • – high-range tracing and highly efficient search for cable damage sites. • – tracing of non-metallic and metallic pipelines by acoustic method and search for leaks from pipelines.

The smart submersible probe L=150 mm SZPG.150PM (d=2 mm) with built-in flash memory is designed to measure the temperature of various materials by direct contact of the probe with the measuring object and transmitting the measured value via Bluetooth to devices with the installed ThermoMonitor, Android program. Operating conditions of the SZPG.150PM smart probe Ambient temperature, °C: -20...+55. Relative humidity, %: not more than 80 at T=35 °C. Atmospheric pressure, kPa: 86...106. Functionality of the SZPG.150PM smart probe Measurement of physical quantities with a resolution of 0.01. Recording of measured values at intervals from 5 seconds to 23 hours 59 minutes 59 seconds (only smart probes with built-in memory). Transmitting data about measured physical quantities via Bluetooth to a device with the ThermoMonitor, Android program installed. Transmitting information about the state of charge of the built-in battery via Bluetooth to a device with the ThermoMonitor, Android program installed. Automatic transition to sleep mode after 50 seconds. The ability to connect an external power supply. Calibration capability.

The NV-1000 MOP-B is a large table with a deep sink made of polypropylene and without a dryer. It is designed for standing work: its height is 85 cm. Dimensions when assembled (W×D×H): 1000×600×850 mm. The table top is made of laminated chipboard. It has a built-in Stegler WJH0357F polypropylene sink, its internal dimensions (W×L×H): 490×390×290 mm. The polypropylene is moisture-resistant, resistant to prolonged exposure to concentrated acids, alkalis and organic solvents and is excellent for washing laboratory dishes. The package includes a stainless steel mixer with flexible 300 mm tap connectors and a siphon. The side laminated panels of the table (chipboard 16 mm thick) are edged on the facade with a 2 mm PVC edge, which increases their impact resistance and mechanical strength. The legs of the table are adjustable in height within two centimeters, allowing you to place it even on a rather uneven floor. Advantages of NV-1000 MOSFET-B tables A wide table with polypropylene sink. An inexpensive solution for laboratories that value the reliability and durability of furniture. Polypropylene sink is resistant to prolonged exposure to concentrated acids, alkalis and organic solvents. Application of NV-1000 MOPB tables Tables of the NV series are used in laboratories of the widest profile: at food and light industry enterprises, in scientific and educational workshops, in chemistry classrooms, quality control centers, medical organizations and many others.

The IS-203.3 meter-recorder is designed to measure and convert analog signals from primary converters (temperature, pressure, humidity, etc.) into the value of the measured physical quantity, as well as to register measuring information in the device's memory and then transfer it to a computer (RS 485 or USB) for visualization in the form of tables and graphs. The meter recorder is a microprocessor-based meter equipped with a non-volatile storage device and a real-time clock. The device has the ability to work as a network device (up to 20 network devices at the same time) or stand-alone with subsequent connection to computers (laptop) for reading data. The operating conditions of the meter IS-203.3 Ambient temperature, °C: -30...+50. Relative humidity, %: up to 90. Atmospheric pressure, kPa: 70...106.7.

The principle of operation of the device UER-03: The principle of operation of the device is based on the creation of equal conditions for all exposed samples during biotesting. It is achieved by rotating the cassette with the test culture samples of crustaceans installed in it around the central axis. Since the sample cassette is oriented obliquely, when it rotates, there is an active gas exchange between the surrounding air and water samples. As the result, test organisms in test tubes are provided with sufficient oxygen concentration in the medium during the entire exposure period. The rotation speed of the cassette is chosen so as not to have a stress effect on the crustaceans. The device operates in continuous mode and does not require additional intervention in the process of exposing the crustacean culture. The required conditions for temperature and light irradiation can be provided only when the device is installed in the climatostat. Used in techniques: - Methodology for determining the toxicity of water extracts from soils, sewage sludge and waste, drinking, sewage and natural water by the mortality of the test object (Daphnia magna Straus). MON F 14.1:2:4.12-06 / 16.1:2.3.3.9-06 FR.1.31.2009.06641. - Methodology for determining the toxicity index of nanopowders, products made of nanomaterials, nanopoints, waste and sewage sludge containing nanoparticles, according to the mortality of the test organism Daphnia magna Straus. FR.1.39.2010.09102 And it can also be used in other suitable techniques.

A trace searching kit for finding underground utilities (cable lines, metal pipelines, and other communications made of conductive materials). The kit includes a receiver in the form of a monoblock with a frost-resistant LCD display, which displays an image of the route and automatically calculates the depth of communication up to 10 m, as well as the current in the line and the most powerful multi-frequency generator in the TECHNO-AC line, with a range of up to 10 km.

This cultivator is an improved model of cultivators of the KVM type of earlier execution. Previously, KVM cultivators had a narrowly focused orientation to the Grigoriev Yu.S. methodology. 14.1:2:3:4.10-04 / 16.1:2:2.3:3.7-04; FR.1.31.2009.06642 (biotest on the reaction of a thermophilic strain of chlorella algae, test function - cell growth in relation to control. the duration of the test is 22 hours, toxicity criteria: 20% suppression of growth. 30% - stimulation of growth in relation to control). The Europolitest company strives to provide Russian laboratories with the best equipment with extensive functionality. Today. we have released a new cultivator KVM-08 with touch control. It can still be used according to the above method (in the same mode - power from the 220V household network via the power supply) At the same time, this cultivator can be connected to the on-board network of climatostats (P2, B3 and B4). In this case, it can maintain the temperature control at the level of 20 gr. With (despite the fact that the climatostat will be configured to maintain 18 gr. S). That is, when connecting this cultivator with the on-board network of the climatostat, the cultivator allows you to work in a wider temperature range (20 - 32 gr. S) And when working from 220V - in the range (27 - 40 gr. S.) In such a way thus, this cultivator allows you to consistently carry out two techniques: 1). 14.1:2:3:4.10-04 / 16.1:2:2.3:3.7-04; FR.1.31.2009.06642 (when operating from 220 V without using a climatostat) 2). RD 52.24.905-2020 (when the cultivator is connected to the on-board network of climatostats (P2, B3 and B4) In addition, with new characteristics and functionality, this cultivator is a convenient research tool. In addition to the preset modes for biotests according to the two above methods, the cultivator has 3 three user modes for free programming by the operator Allows you to configure and "flash" individual parameters: - temperature control : any value from the range of 20 - 40 gr. C (take into account the restrictions for work from 220 or from the board. climatostat networks) - lumostating : the maximum value is 16,000 Lux, the cultivator allows you to adjust from 0 to 100 % - rotation speed of the drum with penicillin vials (24 pcs.) : 0 - 60 rpm - duration of exposure: 0 - 240 h (discreteness of 1 min) - sound notification of the end of the specified exposure time

The NV-400 TDYA cabinet has a drawer and an insert shelf. The standard version of the side cabinet for the laboratory table includes: a niche, 1 drawer on roller guides, 1 swing door, 1 shelf insert, 2 mm shockproof PVC edge, 4 mm plastic baseplates. In the standard version, we offer side cabinets for laboratory tables in gray color. However, in agreement with the customer, it is possible to change the color to white, without increasing the cost. We are also ready to adapt the size and materials so that they meet your needs.

NV-1800 Ln are laboratory tables with a metal frame and a tabletop width of 1500 mm. They are designed for sitting work (the height of the table is 750 mm, this is the height of a regular office desk). The tables have a metal frame painted with durable powder paint. The side laminated panels (chipboard 16 mm thick) are edged on the facade with a durable PVC edge 2 mm thick, which increases their impact resistance and mechanical strength. The legs of the table are adjustable in height within two centimeters, allowing you to place it even on a rather uneven floor. Dimensions of the table when assembled: 1800×700× 750 mm. Working surface for your classes We offer laboratory tables with different working surface material: Version: Table top NV-1800 LLn: Laminate. A budget solution, suitable for school chemistry and physics classrooms, office work, placement of devices. NV-1800 LKn: Porcelain tile. A practical solution for most chemical, biological, medical laboratories and workshops. You can put drying cabinets, baths and other heating devices on it. NV-1800 LSPn: Chemically resistant plastic. A good choice for training workshops, analytical and medical laboratories. It does not tolerate high temperatures well, heating devices should not be placed on the surface. NV-1800 LNn: Stainless steel. Stainless steel is well suited for biological or medical laboratories, but it is not recommended for use in chemical laboratories. It has limited resistance to short-term exposure to concentrated mineral acids and alkalis and is destroyed by prolonged exposure to concentrated acids. NV-1800 LDl: Polypropylene. A specialized solution for chemical laboratories working with inorganic solvents. Advantages of NV-1800 Ln tables It is the largest table in the series, it is possible to organize two full-fledged workplaces. An inexpensive solution for laboratories that value the reliability and durability of furniture; Heating plates or baths can be placed on the granite surface resistant to high temperatures; It is convenient to work sitting down the height of the work surface from the floor is 75 cm. Application of NV-1800 Ln tables Tables of the NV series are used in laboratories of the widest profile: at food and light industry enterprises, in scientific and educational workshops, in chemistry classrooms, quality control centers, medical organizations and many others.

A trace searching kit for finding underground utilities (cable lines, metal pipelines, and other communications made of conductive materials). As part of the kit, the receiver is in the form of a monoblock with a large LCD display, which displays an image of the route and automatically calculates the depth of communication up to 10 m, as well as the current in the line. Built-in GPS\GLONASS module for determining and recording the coordinates of the location of communication. "Probe" mode for tracing NON-METALLIC communications using an in-tube generator (optional). The generator has increased power up to 180 watts and a range of up to 5 km. Connection to the desired route is possible both by contact and contactless method.

The Kors NV-1500 SHV-B laboratory fume cupboard is a single—frame cabinet with a width of 1410 mm with a countertop made of granite tiles. External dimensions of the cabinet (W×D×H): 1410×700×1960 mm. Dimensions of the working area (W×D×H): 1378×540×750 mm. Table top: granite tiles. A convenient fume cupboard for comfortable work in the laboratory The cupboard is available in two versions: with a hood from the lower cabinet and without such a hood. In a cabinet with a hood, various aggressive reagents can be stored, in a cabinet without a hood, it is better to store only laboratory glass or instruments. Working surface material: porcelain tile. It is moisture-resistant and perfectly withstands high temperatures. It is resistant to prolonged exposure to concentrated acids, alkalis and organic solvents. Limited resistance to hydrofluoric acid. This is one of the most popular types of countertops for laboratory furniture. Working area dimensions (W×D×H): 1378×540×750 mm. Please note that the cabinet narrows upwards. At a height of 50 cm, the depth of the working area will be 410 mm, at a height of 70 cm: 365 mm. If you need to place high equipment, then make sure that it corresponds to the dimensions of the camera, otherwise you will not be able to close the cabinet. The height of the raised glass above the cabinet: 510 mm, that is, when the glass is raised, the height of the cabinet will be 2470 mm. The working area is closed by a lifting frame with a counterweight. As standard, there are two exhaust zones: the hood of the exhaust box and the level of the countertop. Diameter of the flange for connection to the ventilation system: 150 mm. A version with an additional hood from the lower cabinet is also available (the flange diameter is also 150 mm). The NV-1500 SHV-B fume cupbpard is equipped with a fluorescent lamp with a switch and two sockets, one of them with grounding. Sockets have the IP20 degree of protection, the maximum load on them: 1.5 kW. The working chamber is an all-welded metal frame in powder coating. Load-bearing laminated panels (chipboard with a thickness of 16 mm) are edged along the facade with a durable PVC edge with a thickness of 2 mm, which increases the impact resistance and mechanical strength of the products. The cabinet legs are adjustable in height within two centimeters, allowing you to place the cabinet even on a rather uneven floor.

Description of the cable finder Success KBI-309N • – Traceroute receiver in the form of a monoblock with a large LCD display. • – The image of the route on the device screen. • – Automatic calculation and display of the depth of the communication up to 10 m, as well as the current in the line. Purpose of the cable finder Success KBI-309N • – Search for live electrical cables. • – Search and tracing of underground utilities (gas pipelines, pipelines, power and telephone cables). • – Determination of the occurrence of underground utilities at a depth of up to 10 m. Features of the AP-019.1 receiver • – Modern digital traceriscover receiver-monoblock AP-019.1. • – The image of the route on the device screen. • – Automatic calculation and display of the depth of communication and current in the line. • – Several options for displaying information on the receiver indicator: "Route", "Graph", "Graph+", "Minimum maximum", modes "Relative distance to communication" and "2-frequencies" allow the operator to use the device's capabilities as efficiently as possible. • – Additional functions when connecting external sensors. • – Wide range of operating frequencies (50(60) / 100(120) / 512 / 1024 / 8192 / 32768 Hz, wide band 40...8000 Hz, radio 8...40 kHz). • – Menu in two languages (Russian and English).