Search

The LOIP LT-117b modification device consists of an immersion thermostat-circulator LOIP LT-100 and a working bath with a lean-to hinged lid. Technical specifications: Temperature range: without external cooling, °C Current+10 ... +100 with tap water cooling °C Tvods+5 ...+100 Accuracy of temperature maintenance, °C ± 0.1 The error of setting the set temperature, no more than ° C ± 0.2 Heater power, W 1900 Pump: max. flow rate, l/min 7.5 pressure, 0.17 bar Bath volume, l 17 The working fluid is water, water-glycerin mixture. Open part of the bath / depth, mm 360x296/150 Overall dimensions, mm 535x335x370 Weight, kg 13

The furnace can be used as a universal laboratory muffle furnace in metallurgical, jewelry and ceramic production, in orthopedic dentistry, chemical and food laboratories. Technical specifications The furnace operates at ambient temperatures from 10 to 35 ° C and relative humidity up to 80% at 25 ° C. The designation of the furnace when ordering: muffle furnace MIMP-75P, where 75 indicates the volume of the furnace working chamber in liters. Power consumption – 6000 W Dimensions of the working chamber WxDxH- 300x450x190 mm Dimensions WxDxH- 570x720x550 mm Weight – 72* kg (* - with control unit)

The sand bath MIMP-BP (hereinafter referred to as the "furnace") is intended for thermal processing of samples and laboratory analysis. Technical specifications The furnace operates at ambient temperatures from 10 to 35 °C and relative humidity up to 80% at 25 ° C. Supply voltage - 220 V Power consumption - 1500 watts Maximum operating temperature- 300 ⁰C Dimensions of the working chamber (WxDxH) - 510x250mm Dimensions of the furnace (WxDxH) - 610x280x160 mm Furnace weight – 7 kg

Convenience and accuracy of measurement | Automatic temperature and barocompensation, air oxygen calibration. Measurement modes | KRK and temperature. IP65 | Compact sealed device is reliably protected from dust and moisture. Non-volatile electronic notebook | The ability to record up to 500 measurement groups in User-named folders. USB port, software included | The ability to create and manage a data archive on a PC. Graphic indicator with backlight | Indication of readings in a user-friendly format, ease of settings. Long-lasting sensor | Sensor service life of at least 10 years. Low power consumption | Up to 600 hours of continuous operation from a set of AA elements. Designed for "operational" monitoring | "Fast" sensor – the measurement time is no more than 3 minutes. Illumination for work in darkened rooms. Record measurements at the touch of a button. Self-diagnosis | Additional guarantee of correct operation of the device

B – vacuum; The coolant furnace is designed for annealing; 2.5 – the volume of the working space in dm3; 25 – the maximum operating temperature divided by 100, i.e., 2500 ° C

Furniture for laboratory work. Table-sink LAB-M MO 80.65.90 F20 Width, mm: 800 Depth, mm: 650 Height, mm: 900 Equipment: Table top – monolithic laboratory ceramics FRIDURIT 20 mm (one-piece seamless glazed plate without a rim, color light gray) 1 built–in bowl - FRIDURIT ceramics. The location of the bowl in the center, the mounting of the bowl is overhead. Inner bowl size – 400*400*250 mm The base of the sink table is a support pedestal made of white melamine Facades – laminated MDF of white color with a thickness of 16 mm, dark gray ABS edging Without shelves

Laboratory heating plate with glass-ceramic surface and two independent heating sections. The size of the heating surface: 300x500 mm. Heating temperature: up to 450 °C. It has two modifications: with built-in and remote control unit.

Technical specifications: Temperature range: without external cooling, °C Current+10 ...+100 with tap water cooling °C Tvods+5 ...+100 Accuracy of temperature maintenance, °C ± 0.1 The error of setting the set temperature, no more than ° C ± 0.2 Heater power, W 1900 Pump: max. flow rate, l/min 7.5 pressure, 0.17 bar Bath volume, l 5 The working fluid is water, water-glycerin mixture. Open part of the bath / depth, mm 110x150/150 Overall dimensions, mm 180x330x320 Weight, kg 4.4

Design features: Programmable microprocessor temperature controller; Three programs of ten steps with the ability to set the temperature, heating speed and holding time for each step Manual heating mode with timer with sound notification and auto-off; Durable ceramic muffle; Closed heaters on four sides of the chamber; Backlit graphic display; Conveniently located control panel; Automatic shutdown of heating when opening the door; Sound and light alarm; Highly efficient thermal insulation of the housing; The furnace body is made of high-quality sheet steel and painted with heat-resistant powder paint. Technical specifications: Maximum heating temperature, °C +1100 Temperature stability in steady-state thermal mode, °C ± 10 Warm-up time to the maximum temperature, no more than 120 min Dimensions of the working chamber, WxHxD, not less than 120x97x195 mm Overall dimensions, WxHxD, not more than 400x535x510 mm Rated supply voltage, 220 V Rated power, W 2200

The 2MO-5 oil separator is installed on the exhaust flange of the pump by means of a quick-release connection, and can also be connected through a pipeline, if there is no possibility of placement on the exhaust flange. If you purchase the 2MO-5 oil separator as an independent product, it is necessary (only for the 2NVR-5DM pump, which has threads in the housing) to remove the pump housing and the exhaust olive, install the fitting instead of the olive with a nut and seal, lay the mesh inside the fitting, install the oil separator with a quick-release clamp, ring and seal.

The AVDM-160 high-vacuum unit consists of a vacuum diffusion oil-vapor pump, a nitrogen trap, a vacuum gate, a frame or a plate. The principle of operation of the AVDM-160 unit is based on the pumping action of a vacuum diffusion steam oil pump. When the AVDM-160 unit is operating, liquid nitrogen is poured into the trap. Condensation of working fluid vapors occurs on the elements of the freezing device cooled with liquid nitrogen. The frame (plate) is designed for mounting the components of the unit. The ends of the wires are attached to the connector fixed on the plate of the AVDM-160 units.

It is designed to maintain the set temperature of the liquid coolant circulating in the internal bath of the thermostat and in the connected external consumers. Feed pump for external closed-type thermostating systems. Cooling capacity 650 W at +15 °C. An internal bath with a volume of 17 liters and a depth of 250 mm. The operating temperature range is +15...+30 °C. Overall dimensions 708x468x885 mm The open part of the bath is 130x185 mm Bath depth 250 mm Weight 65 kg Power consumption 3.5 kW.