Search

Vacuum membrane pump PL.HM02.01.8 Primelab is a universal laboratory device, the performance of which can be adjusted for each task separately. Depending on the method of connecting the chambers, its productivity can be 38 l/min and 76 l/min with a maximum residual pressure of 8 and 45 mbar. With independent connection, 38 l/min for each chamber. A carefully thought out security system ensures a long service life of the device. Complies with IP20 protection class. It makes virtually no noise during operation (up to 75 dB), which does not cause discomfort when the pump is constantly running. It has small dimensions (321x140x200 mm), allowing the device to be placed in an already equipped space. Supplied complete with equipment sufficient for quick assembly and operation of the device.

Technical specifications: Ambient temperature, °C from +10 to +35 Relative humidity (at +25 °C), % no more than 98 Atmospheric pressure, kPa from 84 to 106.7 Power supply 220  22 V, 50  1 Hz Power consumption, VA no more than 150 Overall dimensions (LWC), mm Monitor Multiplexer 665x482x222 665x482x222 Weight, kg Monitor Multiplexer (2-16 channels) 25 15 - 25 Average time to failure, h 12000 Average service life, 5 years

Threaded evaporator GL14 PrimeLab is a convenient laboratory device designed for working with liquid evaporations. A GL14 thread is provided, thanks to which the evaporator can be firmly attached to laboratory equipment or other installation elements. There are tubes on the top and sides. The threaded evaporator was manufactured by Primelab, which provides glassblowing services. We accept orders for the production of various products from borosilicate glass in a short time according to customer parameters.

Measurement of the activity of sodium ions (CNa) and the temperature of aqueous media. Control of parameters of water-chemical regimes at thermal and nuclear power facilities.Two channels | Freely programmable measurement ranges. The possibility of independent measurements at two points of CNa or pNa, temperature. Convenience and accuracy of measurement, minimum maintenance | Measurements from 0.01 CNa. The typical error is 6%. Long intergrading interval (up to 6 months). Automatic thermal compensation. Automatic dosing device of the alkalizing reagent. No capacity with KCl. Calibration by one solution | If necessary, three-point calibration is possible. "Active" sensor unit | The digital communication channel of the sensor with the converter unit is up to 100 meters. Communication with external devices | Galvanically isolated current outputs 0-5/4-20/0-20 Ma. RS 485 port. MODBUS RTU exchange protocol. Programmable settings of the "dry" contact type.

Refrigerator KhSh-1-400 29/32 Primelab is a small laboratory accessory designed for cooling vapors and reagents. Inside it there are small balls along which vapors move and cool due to energy loss. Additional cooling can be achieved by running running water over the jacket. The design of the refrigerator includes a core section (29/32), thanks to which it can be connected to laboratory equipment. Its total length is 56 cm with a working part length of 40 cm.

The jar for reagents, dark glass PrimeLab, 10000 ml is equipped with a lid that closes firmly thanks to the GL45 thread on the neck of the container. Protects against leakage and evaporation. The wall has an area for notes and a measuring scale for quickly determining the volume of contents. Characteristics: • Volume – 10000 ml • Height – 410 mm • Diameter – 234 mm • Thread - GL45.

Flask KN-2-1000-42 PrimeLab is an indispensable laboratory accessory used for heating, cooling, mixing, storage and other laboratory processes. Made from heat-resistant laboratory glass, resistant to high temperatures and chemically active substances. The transparency of the glass makes it possible to observe all the processes occurring inside the flask. Characteristics: • Height - 220 mm • Base diameter - 131 mm • Neck diameter - 42 mm • Volume - 1000 ml.

Technical specifications: Measuring range of mass concentration of mercury vapors in the air, ng/m3 from 20 to 20000 Limits of permissible basic relative error, d0, % ± 20 The limit of permissible relative standard deviation of the analyzer output signal, %5 The limit of the permissible value of the mean square deviation (SKO) of the zero signal, ng/m3 2 Drift of the zero signal of the analyzers in 5 minutes, ng/m3, no more than 2 The limit of permissible change of analyzer readings for 8 hours in fractions of d0 0.5 Time to establish the readings, s, no more than 20 Time of analyzer output to the mode, min, no more than 20 Volumetric flow rate of the analyzed air at the analyzer inlet, dm3/min, not less than 10 Volumetric air flow at the outlet of the gas analyzer system with the inlet blocked, dm3/min, not more than 0.3 Absorption coefficient of mercury vapor by the built-in sorption filter, %, not less than 98 The limit of permissible additional error due to changes in ambient temperature within the operating range for every 10 ° C, in fractions of d0 0.5 The analyzers are powered by a built-in AC battery voltage (220 ±22) In the frequency (50 ±1) Hz Power consumption, In × A, not more than 35 Continuous operation time of the analyzers from the built-in battery, h, at least 8 Overall dimensions of the analyzers, mm, no more than 470x110x220 Mass of analyzers, kg, not more than 7 Reliability indicators average time to failure, h, at least the full average life from the built-in AC battery voltage (220 ± 22) In the frequency (50 ±1) Hz Power consumption, In × A, not more than 35 Continuous operation time of the analyzers from the built-in battery, h, at least 8 Overall dimensions of the analyzers, mm, no more than 470x110x220 Mass of analyzers, kg, no more than 7 Reliability indicators average time to failure, hours, at least full average service life, years, at least 2500

The light glass reagent jar is designed to work with any amount of substance up to 20,000 ml. The package includes a cover. The jar itself has a capacity scale for quickly determining the volume of contents. Designed for reusable use with the possibility of sterilization. Characteristics: • Volume – 20 l • Height – 505 mm • Diameter – 299 mm • Thread - GL45.

Petri dish PrimeLab 120 mm, glass - a small laboratory container with a small edge around the perimeter, made of tempered glass. Consists of two parts with the following features: • The diameter of the upper part is 129 mm with 120 mm of the lower part. • The height of the upper part is slightly lower than the height of the lower part, due to which the upper “lid” fits freely onto the base to protect the contents from the external environment and other microorganisms. • Glass thickness is 2 mm.

The PrimeLab light glass reagent jar, 250 ml, is designed taking into account the requirements of safety and ease of use. Comes complete with a lid that screws onto the neck thanks to a GL45 thread. Prevents the penetration of external substances into stored reagents. Characteristics: • Volume – 250 ml • Height –138 mm • Diameter – 70 mm.

A jar for reagents made of light glass PrimeLab, 2000 ml - a sought-after item for work in laboratories, pharmacies and various industries. Suitable for bulk, liquid, volatile, chemically active and other substances. Made of durable glass, has a long service life. Characteristics: • Volume – 2000 ml • Height – 260 mm • Diameter – 136 mm • Thread - GL45.