Search

The 96-hole tablet of the standard profile is made of ultrapure polypropylene for PCR. The wells have thin walls (0.3-0.35 mm.), providing rapid heat exchange, allowing optimal amplification results to be achieved. The wells are easily separated from each other in any direction into any number of tubes (up to a single one). Compatible with SFG adapters for PCR amplifiers. Tablets are convenient both for high-performance laboratories and for single analyses. The presence of a skirt — Without a skirt Material — Ultrapure Polypropylene The wall thickness is 0.3 — 0.35 mm. Color — White Sterility — Heat treatment in an autoclave at 121 °C for 15 minutes. Marking — Alphanumeric with engraving Profile: Standard

The use of the test tube stand "Workplace" allows you to properly and conveniently organize the space for working with 0.5 ml test tubes. For 0.5 ml test tubes 50 holes: 5 rows of 10 holes Made of plexiglass The conical shape of the holes ensures reliable fixation of the test tubes Rubber feet keep the test tube stand from sliding on benchtop Size 210*100*8

PCR tablet for 96 wells 0.2 ml., without skirt, standard profile (White)

Technical specifications: The range of detectable concentrations 0.025-1.0 and 0.1- 10 mg/l from 10 to 100 mg/l –can be used as an alarm The temperature of the analyzed flow is from + 4 to + 50 °C The pressure in the flow is 0.1-10 atm. Number of measurements per hour 1-4 Output of results Digital scoreboard, RS485, RS232, 4-20 mA current loop Display modes NORM, ALARM, LIMIT Version B1, P1, N1 according to GOST 12997-84 Category of climatic performance UHL4 according to GOST 15150-69 Ambient temperature from + 5 to + 50 °C Relative humidity at + 25 °C 80% Atmospheric pressure 84-106.7 kPa The amplitude of external vibrations with a frequency of 10-55 Hz is not more than 0.15 mm Power supply 187-242 V, 50 ± 1 Hz from an autonomous source, 12 V Power consumption not more than 100 watts Dimensions 600x600x250 mm Weight 50 kg The warranty period of operation is 1 year Average service life of at least 5 years Average time to failure of at least 20,000 hours

The PA-1 single-channel portable aspirator is based on the PC-1 portable compressor. It provides air aspiration with a flow rate from 0.1 to 0.8 l/min. The aspirator is powered by an integral battery.

Electronic control Refrigerant R600a Total volume, l. 200 Number of compressors, pcs. 1 Height, mm 1660 Depth, mm 860 Width, mm 730 Weight, kg., no more 100 Rated power consumption, W 160 Voltage, 220 V Warranty, 1 year Cold storage Temperature in the refrigerator, °C +2...+8 Freezer Thermal card: yes Cold storage battery, pcs 51 Efficiency and power consumption Electricity consumption, kWh/day, not more than 0.35 Frequency, Hz 50

Technical specifications: The power consumption of the alarm is not more than 150 watts The output electrical signal goes directly from the cable entry (B6), according to the standard scheme (4-20ma and (or) RS 485) Sample temperature is not more than 200 degrees C Sample pressure is not more than 1.5 Atm The pressure of the spent sample is not more than 0.5 Atm Cooling water temperature 5-30 Deg C Dimensions of the alarm (mm) 1200*600*400 The boundaries of the spectral range of optical radiation used for analysis, nm 240 - 380 Analysis time, from 1 Power supply - alternating voltage (220 ± 10%) V, (50± 2.5) Hz operating mode settings, min no more than 30 Display range , mg/l 0.01-30 The limit of the basic error for the trigger threshold (%) 20 The set threshold for triggering the alarm 0.1 – 30.9 in increments of 0.1 mg/l the probability of trouble-free operation during 5000 hours is not less than 0.95 average recovery time, no more than 2 hours average service life, at least 5 years

Analyzes a wide range of quality indicators (protein/protein, moisture, quantity and quality of gluten (IDC), fat/oil content, water absorption capacity, etc.) It is possible to calculate the amino acid composition of feed components Works with samples of the analyzed substance in the form of grinding The ECANET digital platform allows you to integrate the INFRASCAN analyzers into local networks. Up to 1 million measurement results are stored in the device's memory. Equipped with a universal cuvette, which allows to analyse not only bulk, but also pasty products (mayonnaise). The built-in whiteness module permits to determine the whiteness of the product simultaneously with other quality indicators (moisture, protein, amount of gluten). The analysis time takes 1-1.2 minutes. The device allows to get a result for several indicators in one measurement. High vibration resistance allows to work both in the laboratory and in industrial space. The error of the measurement results meets the requirements of GOST. At each launch of the device, self-testing of internal connections, a monochromator and a detector is provided, which ensures the accuracy of the results throughout the entire operation of the analyzer.

At the Scientific Research Center of the Russian Academy of Sciences, the technology of acousto-optic filtration of optical radiation is used to create a wide class of optical devices that are successfully used, for example, in biomedicine to diagnose various diseases (including oncology), in agriculture to diagnose the condition of plants, during non-destructive testing of complex technical objects and in solving other tasks. Acousto-optics has a number of important advantages over other technologies for obtaining spectral information: - the ability to create imaging devices without spatial scanning, since the acousto-optic filter is a software-controlled tunable light filter; - the compact modular design allows the acousto-optic filter to be integrated into the optical circuit of most imaging devices, which expands their analytical capabilities; - spectrum scanning is carried out by means of an electrical signal, without mechanical scanning; - fast arbitrary spectral addressing causes high shooting speed and the absence of redundant information; - software management. The key element of the presented device – an acousto–optic filter - is being developed at the Scientific Research Center of the UP RAS on the basis of original calculation methods. The manufacture of acousto-optic filters, optical and mechanical components, as well as the assembly, tuning, and calibration of such devices is also carried out at the Scientific Research Center of the UP RAS.