Search

Maximum heating temperature, °C 400 Temperature difference across the platform, °C, no more than ± 5 Dimensions of the heating platform, mm 435x315 Tray dimensions, mm 430x310x50 Power consumption, W 2500 Platform material aluminum alloy Overall dimensions, mm (without tray) 470x453x110 Weight, kg 15

Vacuum resistance furnaces are necessary for heating products before pressure treatment, for sintering, degassing, quenching, annealing, soldering and chemical-technological processes. Such furnaces among all the variety of thermal equipment are considered the most environmentally friendly – heat treatment is carried out at t up to +2500 ° C in a purified vacuum. Under certain conditions, vacuum furnaces are used to work with neutral gases. The outer part of the furnace is made of stainless steel and is cooled by liquid. The inner part of the working chamber, where the heat treatment of materials is carried out, is made of an alloy of molybdenum and tungsten. The components are characterized by a low inertia force, reduced gas separation. The settings are available on the control panel, where the instruments, automatic and manual control switches are located. At every enterprise of the electronic industry, nuclear power, an explosion-proof vacuum resistance furnace is needed. The same applies to areas where various products undergo heat treatment at the stage of production and preparation for use.

The control cabinet of thermal equipment SHUP-65-1 is designed to control industrial single-zone furnaces with a maximum power of up to 65 kW and a voltage of 380 volts connected by a star or triangle. The cabinets have an emergency detector and a system for monitoring the operating modes of the equipment. The control cabinet of thermal equipment SHUP-65-1 is equipped with a remote monitoring and control system with an RS-485 or Ethernet interface. The dispatching system developed in Russia does not require significant additional costs for integration into the dispatching systems of thermal workshops.

Industrial drying cabinet SNOL (SHS) 1700/3-I2 V is designed for drying, tempering, aging, thermal testing and other types of heat treatment of various materials in an air environment at temperatures up to 350 (optionally up to 500) ° C with forced air convection in stationary conditions.

Design features: Durable ceramic muffle; Semi-open heaters on four sides of the chamber Microprocessor temperature controller; Conveniently located control panel and bright LED display; Automatic shutdown of heating when opening the door; Ease of management and control; LED indicators of heater operation and protection operation; Alarm when the current temperature exceeds the limits of the permissible range; Highly efficient thermal insulation of the housing; The furnace body is made of high-quality sheet steel and painted with heat-resistant powder paint. Technical specifications: Maximum heating temperature, °C +1300 Temperature stability in steady-state thermal mode, °C ± 10 Warm-up time to the maximum temperature, no more than 120 min Dimensions of the working chamber, WxHxD, not less than 200x110x285 mm Overall dimensions, WxHxD, not more than 505x565x655 mm Rated supply voltage, 220 V Rated power, W 3300

Designation SAT-0.5/7.5 Supply voltage, V 380 Installed capacity, kW 42 Temperature stability in steady-state mode, °C ± 5

Designation: SNO-6.12.4 Temperature: 1200 Opendoors: electromechanical Camera size (w.G.V.):600x1200x400 Regulation zones: 1

Temperature setting range, oC +35…+95 Temperature error, oC ±1.0 is protected from excess temperature RAINBOW TSR-150S F-C Hydraulic thermostat Supply voltage, V 230+-10% Current consumption 3.3 A Power consumption, 750 W Overall dimensions L x W x H, mm 380 x 300 x 190 Overall dimensions of the bath L x W x H, mm 290 x 300 x 140 Total/ engine capacity, 12.0/9.0 l

The laboratory drying cabinet SNOL-F-67 is designed for thermal testing, aging, as well as drying, tempering and other types of heat treatment of various materials in an air environment at temperatures up to 350 (optionally up to 500) ° C with natural or forced air convection in stationary conditions.

The electric drying cabinet SHS-40/5.0 is designed for drying, heating various materials in air environment at a maximum temperature of 500 ° C. Technical specifications The electric cabinet operates at ambient temperature from 10 to 35 ° C and relative humidity up to 80% at 25 ° C. Operating temperature- 500 ⁰C Power consumption - 2500 W Dimensions of the working chamber WxDxH- 390x360x39 mm Dimensions WxDxH- 600x640x59 mm Weight - 67 kg

The SNVS-50/3.5 vacuum drying cabinet with a volume of 50 liters with manual vacuum adjustment is designed for heat treatment of materials at temperatures up to 350 with air access and in a vacuum controlled by manual valves. Thanks to modern temperature control, it demonstrates excellent performance of heat treatment modes. The measurement system complies with Russian standards and has certificates of entry into the SI State Register. Design for heat treatment in production and clean laboratories. The cabinet can be equipped with a software control device with an automatic timer and a wide selection of additional options.